Re: Force parity resync on raid5?

Gordon Henderson wrote:

On Mon, 9 Aug 2004, Philip Molter wrote:

quoted

How do I force a parity resync on a raid5 array?  Under 2.4, I would do
this by hard cycling the box and when it came back up, it would
automatically resync the array.  Under 2.6, this appears to have gone away.

I don't know about 2.6, (still living with 2.4) but can't you simply do:

  raidhotremove /dev/mdX /dev/hdYZ

followed by

  raidhotadd /dev/mdX /dev/hdYZ

or /dev/sdYZ if SCSI disks...

However, picking the right disk to remove might be tricky... And if you
were at all unsure about data on the disks, maybe rebooting and doing a
hard fsck of the partition(s) in maintenance mode might be a good thing
too...

Nope, I want something that will specifically resync the parity from the
known good data on the disks.  Thanks to the raid5 resync bug from
earlier 2.6 kernels, I have hundreds of systems with terabytes of data
that have perfectly good data sitting on raid5 arrays with corrupt
parity.  If I remove a drive to force a resync, the data is immediately
corrupted.

Linux RAID *has* to have sort of way to force a parity resync.  If it
doesn't have one, it needs one.  That's a glaring omission to make.

Philip