RAID1 (drive isn't detecting on boot)
From: Eric Drew Hollins <hidden>
Date: 2003-01-30 16:30:21
Ok, I have a RAID1 set up on identical Maxtor 60GB drives. They were working the other day, but not now. Here is the message that I get when I boot up: md: raid1 personality registered as nr 3 md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: Autodetecting RAID arrays. [events: 00000000] md: invalid raid superblock magic on hde1 md: hde1 has invalid sb, not importing! md: could not import hde1! [events: 00000022] md: autorun ... md: considering hdg1 ... md: adding hdg1 ... md: created md0 md: bind<hdg1,1> md: running: <hdg1> md: hdg1's event counter: 00000022 md: RAID level 1 does not need chunksize! Continuing anyway. md0: max total readahead window set to 124k md0: 1 data-disks, max readahead per data-disk: 124k raid1: device hdg1 operational as mirror 1 raid1: md0, not all disks are operational -- trying to recover array raid1: raid set md0 active with 1 out of 2 mirrors md: updating md0 RAID superblock on device md: hdg1 [events: 00000023]<6>(write) hdg1's sb offset: 58463872 md: recovery thread got woken up ... md0: no spare disk to reconstruct array! -- continuing in degraded mode md: recovery thread finished ... md: ... autorun DONE. Any ideas? If you need more info, just let me know. Thanks. **** Eric Drew Hollins **** **** Georgia Institute of Technology **** **** 336198 GT Station, Atlanta, GA 30332 **** **** W: http://jastermereel.org **** **** C: 404.312.0685 ****