Re: Re: RAID1 failure recovery

I checked the partition type of my  RAID1 disk. It was FreeBSD (not 0xFD  - Linux Raid Autodetect)!

I changed it to 0xFD.
I changed also boot=/dev/hda to boot=/dev/md0 in my lilo.conf and everything began working well!

Thanks a lot to all people in this mailing list, who helped me with my problem!


---------------
Maxim Frolov


Neil Brown [off-list ref] schrieb am 10.05.02:

quoted

My questions is: How do I recover the failed RAID1 disk (dev/hda1)?
What I did wrong?

You forgot to set the partition time of /dev/hda1 to "Linux RAID
autodetect" or whatever it is meant to be.

Alvin Oga [off-list ref] schrieb am 11.05.02:

hi ya maxim

i'd also double check lilo.conf 
	boot=/dev/md0
	...
	root=/dev/md0

i've seen people use 
	boot=/dev/hda   

	and make  different one on /dev/hdc w/ boot=/dev/hdc

what did suse-8 do to these lilo configs??

and as neil says...  check that its FD partition type ( not ext2 )

michael@insulin-pumpers.org schrieb am 10.05.02:

change the partiton type to FD

quoted

________________________________________________________________
Keine verlorenen Lotto-Quittungen, keine vergessenen Gewinne mehr! 
Beim WEB.DE Lottoservice: http://tippen2.web.de/?x=13