# \[PATCH\] thermal: qcom: tsens\_v1: Enable sensor 3 on MSM8976

- From: Konrad Dybcio \<hidden\>
- Date: 2021-02-25 21:32:41 
- List: linux-pm
- Page: https://ratatoskr.run/linux-pm/2021/02/6279429
- Thread: https://ratatoskr.run/phone-devel/2021/02/6279429/t.md

```text
The sensor *is* in fact used and does report temperature.

Signed-off-by: Konrad Dybcio <redacted>
---
 drivers/thermal/qcom/tsens-v1.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index 3c19a3800c6d..573e261ccca7 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -380,11 +380,11 @@ static const struct tsens_ops ops_8976 = {
 	.get_temp	= get_temp_tsens_valid,
 };
 
-/* Valid for both MSM8956 and MSM8976. Sensor ID 3 is unused. */
+/* Valid for both MSM8956 and MSM8976. */
 struct tsens_plat_data data_8976 = {
 	.num_sensors	= 11,
 	.ops		= &ops_8976,
-	.hw_ids		= (unsigned int[]){0, 1, 2, 4, 5, 6, 7, 8, 9, 10},
+	.hw_ids		= (unsigned int[]){0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10},
 	.feat		= &tsens_v1_feat,
 	.fields		= tsens_v1_regfields,
 };
-- 
2.30.1

```