# \[PATCH v2 1/3\] arm64: dts: qcom: lemans: add CSI2 D-PHY common-phy providers

- From: Anusha Arun Nandi \<hidden\>
- Date: 2026-11-03 22:10:32 
- List: linux-phy
- Page: https://ratatoskr.run/linux-phy/2026/11/17856460
- Thread: https://ratatoskr.run/linux-phy/2026/11/17856459/t.md

```text
Expose the four SA8775p CSIPHYs as standalone qcom,sa8775p-csi2-phy
generic-PHY provider nodes (csiphy0..3) at their existing register
addresses, each with its own OF graph (port@0 sensor-facing, port@1
CAMSS-facing) so camss_detect_legacy_phy() picks the non-legacy path
once a board wires a sensor through one of them. The camss node's own
reg-names/clocks/interrupts for the CSIPHYs are unchanged, so boards
that don't use a provider still get the legacy binding.

The provider nodes are disabled by default; a board or camera overlay
enables the one(s) it uses.

Reviewed-by: Jigarkumar Zala <redacted>
Signed-off-by: Anusha Arun Nandi <redacted>
---
 arch/arm64/boot/dts/qcom/lemans.dtsi | 140 +++++++++++++++++++++++++++
 1 file changed, 140 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/lemans.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index 1fdb72fa5518..2a30bf1c82af 100644
--- a/arch/arm64/boot/dts/qcom/lemans.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -5164,6 +5164,146 @@ cci3_i2c1: i2c-bus@1 {
 			};
 		};
 
+		csiphy0: phy@ac9c000 {
+			compatible = "qcom,sa8775p-csi2-phy";
+			reg = <0x0 0x0ac9c000 0x0 0x2000>;
+
+			clocks = <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>;
+			clock-names = "core",
+				      "timer";
+
+			interrupts = <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>;
+
+			operating-points-v2 = <&csiphy_opp_table>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		csiphy1: phy@ac9e000 {
+			compatible = "qcom,sa8775p-csi2-phy";
+			reg = <0x0 0x0ac9e000 0x0 0x2000>;
+
+			clocks = <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>;
+			clock-names = "core",
+				      "timer";
+
+			interrupts = <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>;
+
+			operating-points-v2 = <&csiphy_opp_table>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		csiphy2: phy@aca0000 {
+			compatible = "qcom,sa8775p-csi2-phy";
+			reg = <0x0 0x0aca0000 0x0 0x2000>;
+
+			clocks = <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>;
+			clock-names = "core",
+				      "timer";
+
+			interrupts = <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>;
+
+			operating-points-v2 = <&csiphy_opp_table>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		csiphy3: phy@aca2000 {
+			compatible = "qcom,sa8775p-csi2-phy";
+			reg = <0x0 0x0aca2000 0x0 0x2000>;
+
+			clocks = <&camcc CAM_CC_CSIPHY3_CLK>,
+				 <&camcc CAM_CC_CSI3PHYTIMER_CLK>;
+			clock-names = "core",
+				      "timer";
+
+			interrupts = <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>;
+
+			operating-points-v2 = <&csiphy_opp_table>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
+		csiphy_opp_table: opp-table-csiphy {
+			compatible = "operating-points-v2";
+
+			opp-300000000 {
+				opp-hz = /bits/ 64 <300000000>;
+			};
+
+			opp-400000000 {
+				opp-hz = /bits/ 64 <400000000>;
+			};
+		};
+
 		camss: isp@ac78000 {
 			compatible = "qcom,sa8775p-camss";
 
-- 
2.34.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
```
