# \[PATCH v4 12/13\] arm64: dts: qcom: ipq5018: Add Super-Speed UNIPHY to USB node - From: George Moussalem via B4 Relay \ - Date: 2026-09-08 09:41:56 - List: linux-phy - Page: https://ratatoskr.run/linux-phy/2026/09/17529798 - Thread: https://ratatoskr.run/linux-arm-msm/2026/09/17529786/t.md ```text From: George Moussalem Add the USB3 UNIPHY to the USB controller node for USB3 support. In addition, switch to the pipe clock supplied by the USB3 UNIPHY instead of the UTMI clock. Reviewed-by: Konrad Dybcio Tested-by: Stanislaw Pal Signed-off-by: George Moussalem --- arch/arm64/boot/dts/qcom/ipq5018.dtsi | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi index a6e337e137c8..8e5d45a214a5 100644 --- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi +++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi @@ -627,10 +627,8 @@ usb: usb@8a00000 { resets = <&gcc GCC_USB0_BCR>; - phys = <&usbphy0>; - phy-names = "usb2-phy"; - - qcom,select-utmi-as-pipe-clk; + phys = <&usbphy0>, <&usbphy1>; + phy-names = "usb2-phy", "usb3-phy"; tx-fifo-resize; snps,is-utmi-l1-suspend; -- 2.53.0 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ```