# \[PATCH v2 1/9\] dt-bindings: phy: mediatek: tphy: support type switch by pericfg - From: Chunfeng Yun \ - Date: 2021-08-11 09:19:37 - List: linux-phy - Page: https://ratatoskr.run/linux-phy/2021/08/1474640 - Thread: https://ratatoskr.run/linux-arm-kernel/2021/08/1474640/t.md ```text Add support type switch by pericfg register between USB3, PCIe, SATA, SGMII, this is used to replace the way through efuse or jumper. Reviewed-by: Rob Herring Signed-off-by: Chunfeng Yun --- v2: add reviewed-by Rob --- .../devicetree/bindings/phy/mediatek,tphy.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml index 838852cb8527..9e6c0f43f1c6 100644 --- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml +++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml @@ -201,6 +201,22 @@ patternProperties: Specify the flag to enable BC1.2 if support it type: boolean + mediatek,syscon-type: + $ref: /schemas/types.yaml#/definitions/phandle-array + maxItems: 1 + description: + A phandle to syscon used to access the register of type switch, + the field should always be 3 cells long. + items: + items: + - description: + The first cell represents a phandle to syscon + - description: + The second cell represents the register offset + - description: + The third cell represents the index of config segment + enum: [0, 1, 2, 3] + required: - reg - "#phy-cells" -- 2.25.1 -- linux-phy mailing list linux-phy@lists.infradead.org https://lists.infradead.org/mailman/listinfo/linux-phy ```