[PATCH v4 0/4] DT schema changes for HiKey970 PCIe hardware to work

Hi Rob,

It follows the DT bindings for Kirin 970 PCIE and its corresponding PHY,
rebased on the top of next-20210803.

It should apply cleanly on the top of:
	https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git/log/?h=dt/next

Note: you mentioned that patch 1 was already applied, but it is not
there yet. I opted to keep it at the tree, in case someone wants to
apply this series on the top of linux-next.

v4:
  - Rebased and fixed a merge conflict

v3:
  - Fixed a comment on patch 3: The Ethernet controller is at lane 6.

v2:
  - removed the DTS file. I'll submit it in separate, once having
    everything else merged;
  - it now doesn't produce any warnings with:
        make DT_SCHEMA_FILES=Documentation/devicetree/bindings/pci/hisilicon,kirin
-pcie.yaml DT_CHECKER_FLAGS=-m dt_binding_check
  - added the upstream node;
  - the clock enable now uses a new property (hisilicon,clken-gpios);
  - the reg for the PCI devices are now properly filled;
  - the pcie@x,y nodes now match the port number from table 4-1 from the
   datasheet.


Mauro Carvalho Chehab (4):
  dt-bindings: PCI: kirin: Fix compatible string
  dt-bindings: PCI: kirin: Convert kirin-pcie.txt to yaml
  dt-bindings: PCI: kirin: Add support for Kirin970
  dt-bindings: phy: Add bindings for HiKey 970 PCIe PHY

 .../bindings/pci/hisilicon,kirin-pcie.yaml    | 160 ++++++++++++++++++
 .../devicetree/bindings/pci/kirin-pcie.txt    |  50 ------
 .../devicetree/bindings/pci/snps,dw-pcie.yaml |   2 +-
 .../phy/hisilicon,phy-hi3670-pcie.yaml        |  82 +++++++++
 MAINTAINERS                                   |   2 +-
 5 files changed, 244 insertions(+), 52 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.yaml
 delete mode 100644 Documentation/devicetree/bindings/pci/kirin-pcie.txt
 create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml

-- 
2.31.1



-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

Document the bindings for HiKey 970 (hi3670) PCIe PHY
interface, supported via the pcie-kirin driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../phy/hisilicon,phy-hi3670-pcie.yaml        | 82 +++++++++++++++++++
 1 file changed, 82 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml

diff --git a/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml b/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml
new file mode 100644
index 000000000000..17367a0275fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml

@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/hisilicon,phy-hi3670-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: HiSilicon Kirin970 PCIe PHY
+
+maintainers:
+  - Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
+
+description: |+
+  Bindings for PCIe PHY on HiSilicon Kirin 970.
+
+properties:
+  compatible:
+    const: hisilicon,hi970-pcie-phy
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+    description: PHY Control registers
+
+  phy-supply:
+    description: The PCIe PHY power supply
+
+  clocks:
+    items:
+      - description: PCIe PHY clock
+      - description: PCIe AUX clock
+      - description: PCIe APB PHY clock
+      - description: PCIe APB SYS clock
+      - description: PCIe ACLK clock
+
+  clock-names:
+    items:
+      - const: phy_ref
+      - const: aux
+      - const: apb_phy
+      - const: apb_sys
+      - const: aclk
+
+  hisilicon,eye-diagram-param:
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    description: Eye diagram for phy.
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - hisilicon,eye-diagram-param
+  - phy-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/hi3670-clock.h>
+
+    soc {
+      #address-cells = <2>;
+      #size-cells = <2>;
+      pcie_phy: pcie-phy@fc000000 {
+        compatible = "hisilicon,hi970-pcie-phy";
+        reg = <0x0 0xfc000000 0x0 0x80000>;
+        #phy-cells = <0>;
+        phy-supply = <&ldo33>;
+        clocks = <&crg_ctrl HI3670_CLK_GATE_PCIEPHY_REF>,
+                 <&crg_ctrl HI3670_CLK_GATE_PCIEAUX>,
+                 <&crg_ctrl HI3670_PCLK_GATE_PCIE_PHY>,
+                 <&crg_ctrl HI3670_PCLK_GATE_PCIE_SYS>,
+                 <&crg_ctrl HI3670_ACLK_GATE_PCIE>;
+        clock-names = "phy_ref", "aux",
+                      "apb_phy", "apb_sys", "aclk";
+        hisilicon,eye-diagram-param = <0xffffffff 0xffffffff
+                                       0xffffffff 0xffffffff 0xffffffff>;
+      };
+    };

-- 
2.31.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy

On Wed, 04 Aug 2021 09:18:57 +0200, Mauro Carvalho Chehab wrote:

Document the bindings for HiKey 970 (hi3670) PCIe PHY
interface, supported via the pcie-kirin driver.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../phy/hisilicon,phy-hi3670-pcie.yaml        | 82 +++++++++++++++++++
 1 file changed, 82 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/hisilicon,phy-hi3670-pcie.yaml

Applied, thanks!

-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy