Thread (265 messages) 265 messages, 11 authors, 2026-01-29

[PATCH 6.6 018/254] net/mlx5e: Restore destroying state bit after profile cleanup

From: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Date: 2026-01-28 15:27:18
Also in: stable
Subsystem: mellanox ethernet driver (mlx5e), mellanox mlx5 core vpi driver, networking drivers, the rest · Maintainers: Saeed Mahameed, Tariq Toukan, Mark Bloch, Leon Romanovsky, Andrew Lunn, "David S. Miller", Eric Dumazet, Jakub Kicinski, Paolo Abeni, Linus Torvalds

6.6-stable review patch.  If anyone has any objections, please let me know.

------------------

From: Saeed Mahameed <saeedm@nvidia.com>

[ Upstream commit 5629f8859dca7ef74d7314b60de6a957f23166c0 ]

Profile rollback can fail in mlx5e_netdev_change_profile() and we will
end up with invalid mlx5e_priv memset to 0, we must maintain the
'destroying' bit in order to gracefully shutdown even if the
profile/priv are not valid.

This patch maintains the previous state of the 'destroying' state of
mlx5e_priv after priv cleanup, to allow the remove flow to cleanup
common resources from mlx5_core to avoid FW fatal errors as seen below:

$ devlink dev eswitch set pci/0000:00:03.0 mode switchdev
    Error: mlx5_core: Failed setting eswitch to offloads.
dmesg: mlx5_core 0000:00:03.0 enp0s3np0: failed to rollback to orig profile, ...

$ devlink dev reload pci/0000:00:03.0

mlx5_core 0000:00:03.0: E-Switch: Disable: mode(LEGACY), nvfs(0), necvfs(0), active vports(0)
mlx5_core 0000:00:03.0: poll_health:803:(pid 519): Fatal error 3 detected
mlx5_core 0000:00:03.0: firmware version: 28.41.1000
mlx5_core 0000:00:03.0: 0.000 Gb/s available PCIe bandwidth (Unknown x255 link)
mlx5_core 0000:00:03.0: mlx5_function_enable:1200:(pid 519): enable hca failed
mlx5_core 0000:00:03.0: mlx5_function_enable:1200:(pid 519): enable hca failed
mlx5_core 0000:00:03.0: mlx5_health_try_recover:340:(pid 141): handling bad device here
mlx5_core 0000:00:03.0: mlx5_handle_bad_state:285:(pid 141): Expected to see disabled NIC but it is full driver
mlx5_core 0000:00:03.0: mlx5_error_sw_reset:236:(pid 141): start
mlx5_core 0000:00:03.0: NIC IFC still 0 after 4000ms.

Fixes: c4d7eb57687f ("net/mxl5e: Add change profile method")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://patch.msgid.link/20260108212657.25090-5-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/ethernet/mellanox/mlx5/core/en_main.c | 3 +++
 1 file changed, 3 insertions(+)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
index 5c6f01abdcb91..03201bcda1a68 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_main.c
@@ -5687,6 +5687,7 @@ int mlx5e_priv_init(struct mlx5e_priv *priv,
 
 void mlx5e_priv_cleanup(struct mlx5e_priv *priv)
 {
+	bool destroying = test_bit(MLX5E_STATE_DESTROYING, &priv->state);
 	int i;
 
 	/* bail if change profile failed and also rollback failed */
@@ -5712,6 +5713,8 @@ void mlx5e_priv_cleanup(struct mlx5e_priv *priv)
 	}
 
 	memset(priv, 0, sizeof(*priv));
+	if (destroying) /* restore destroying bit, to allow unload */
+		set_bit(MLX5E_STATE_DESTROYING, &priv->state);
 }
 
 static unsigned int mlx5e_get_max_num_txqs(struct mlx5_core_dev *mdev,
-- 
2.51.0


Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help