[PATCH v2 1/3 v2] video: fbdev: omapfb: lcd_ams_delta: use GPIO lookup table
From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Date: 2018-07-17 23:15:11
Also in:
dri-devel, linux-arm-kernel, linux-fbdev, lkml
Subsystem:
framebuffer layer, omap framebuffer support, the rest · Maintainers:
Helge Deller, Linus Torvalds
Now as Amstrad Delta board - the only user of this driver - provides
GPIO lookup tables, switch from GPIO numbers to GPIO descriptors and
use the table to locate required GPIO pins.
Declare static variables for storing GPIO descriptors and replace
gpio_ function calls with their gpiod_ equivalents. Move GPIO lookup
to the driver probe function so device initialization can be deferred
instead of aborted if a GPIO pin is not yet available.
Pin naming used by the driver should be followed while respective GPIO
lookup table is initialized by a board init code.
Cc: Bartlomiej Zolnierkiewicz <redacted>
Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
---
Changelog:
v2: Remove problematic error code conversion no longer needed if used
on top of commit d08605a64e67 ("ARM: OMAP1: ams-delta: move late
devices back to init_machine") already in linux-omap and commit
8853daf3b4ac ("gpiolib: Defer on non-DT find_chip_by_name()
failure") already in linux-next
Dependency on commit 8853daf3b4ac ("gpiolib: Defer on non-DT
find_chip_by_name() failure") is not critical for clean build or run, it
only prevents from unexpected future changes to driver initialization
order durin device_initall.
drivers/video/fbdev/omap/lcd_ams_delta.c | 55 +++++++++++++-------------------
1 file changed, 22 insertions(+), 33 deletions(-)
diff --git a/drivers/video/fbdev/omap/lcd_ams_delta.c b/drivers/video/fbdev/omap/lcd_ams_delta.c
index e8c748a0dfe2..cddbd00cbf9f 100644
--- a/drivers/video/fbdev/omap/lcd_ams_delta.c
+++ b/drivers/video/fbdev/omap/lcd_ams_delta.c@@ -24,11 +24,10 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/delay.h> +#include <linux/gpio/consumer.h> #include <linux/lcd.h> -#include <linux/gpio.h> #include <mach/hardware.h> -#include <mach/board-ams-delta.h> #include "omapfb.h"
@@ -41,6 +40,8 @@ /* LCD class device section */ static int ams_delta_lcd; +static struct gpio_desc *gpiod_vblen; +static struct gpio_desc *gpiod_ndisp; static int ams_delta_lcd_set_power(struct lcd_device *dev, int power) {
@@ -99,41 +100,17 @@ static struct lcd_ops ams_delta_lcd_ops = { /* omapfb panel section */ -static const struct gpio _gpios[] = { - { - .gpio = AMS_DELTA_GPIO_PIN_LCD_VBLEN, - .flags = GPIOF_OUT_INIT_LOW, - .label = "lcd_vblen", - }, - { - .gpio = AMS_DELTA_GPIO_PIN_LCD_NDISP, - .flags = GPIOF_OUT_INIT_LOW, - .label = "lcd_ndisp", - }, -}; - -static int ams_delta_panel_init(struct lcd_panel *panel, - struct omapfb_device *fbdev) -{ - return gpio_request_array(_gpios, ARRAY_SIZE(_gpios)); -} - -static void ams_delta_panel_cleanup(struct lcd_panel *panel) -{ - gpio_free_array(_gpios, ARRAY_SIZE(_gpios)); -} - static int ams_delta_panel_enable(struct lcd_panel *panel) { - gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 1); - gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 1); + gpiod_set_value(gpiod_ndisp, 1); + gpiod_set_value(gpiod_vblen, 1); return 0; } static void ams_delta_panel_disable(struct lcd_panel *panel) { - gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_VBLEN, 0); - gpio_set_value(AMS_DELTA_GPIO_PIN_LCD_NDISP, 0); + gpiod_set_value(gpiod_vblen, 0); + gpiod_set_value(gpiod_ndisp, 0); } static struct lcd_panel ams_delta_panel = {
@@ -154,8 +131,6 @@ static struct lcd_panel ams_delta_panel = { .pcd = 0, .acb = 37, - .init = ams_delta_panel_init, - .cleanup = ams_delta_panel_cleanup, .enable = ams_delta_panel_enable, .disable = ams_delta_panel_disable, };
@@ -166,9 +141,23 @@ static struct lcd_panel ams_delta_panel = { static int ams_delta_panel_probe(struct platform_device *pdev) { struct lcd_device *lcd_device = NULL; -#ifdef CONFIG_LCD_CLASS_DEVICE int ret; + gpiod_vblen = devm_gpiod_get(&pdev->dev, "vblen", GPIOD_OUT_LOW); + if (IS_ERR(gpiod_vblen)) { + ret = PTR_ERR(gpiod_vblen); + dev_err(&pdev->dev, "VBLEN GPIO request failed (%d)\n", ret); + return ret; + } + + gpiod_ndisp = devm_gpiod_get(&pdev->dev, "ndisp", GPIOD_OUT_LOW); + if (IS_ERR(gpiod_ndisp)) { + ret = PTR_ERR(gpiod_ndisp); + dev_err(&pdev->dev, "NDISP GPIO request failed (%d)\n", ret); + return ret; + } + +#ifdef CONFIG_LCD_CLASS_DEVICE lcd_device = lcd_device_register("omapfb", &pdev->dev, NULL, &ams_delta_lcd_ops);
--
2.16.4