linux-next: manual merge of the usb tree with the qcom tree
From: Mark Brown <broonie@kernel.org>
Date: 2021-08-06 14:10:46
Also in:
lkml
Subsystem:
arm/qualcomm chromebook support, arm/qualcomm mailing list, arm/qualcomm support, the rest · Maintainers:
Bjorn Andersson, Konrad Dybcio, Linus Torvalds
Hi all,
Today's linux-next merge of the usb tree got a conflict in:
arch/arm64/boot/dts/qcom/sc7280-idp.dts
between commit:
7dfb52dcc5a4 ("arm64: dts: qcom: sc7280: Remove pm8350 and pmr735b for sc7280-idp")
from the qcom tree and commit:
73cb0912894b ("arm64: dts: qcom: sc7280: Add USB nodes for IDP board")
from the usb tree.
I fixed it up (see below) and can carry the fix as necessary. This
is now fixed as far as linux-next is concerned, but any non trivial
conflicts should be mentioned to your upstream maintainer when your tree
is submitted for merging. You may also want to consider cooperating
with the maintainer of the conflicting tree to minimise any particularly
complex conflicts.
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index 64fc22aff33d..894c3e92a0d7 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts@@ -68,3 +68,62 @@ qcom,pre-scaling = <1 1>; }; }; + +&uart5 { + status = "okay"; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l10c_0p8>; + vdda33-supply = <&vreg_l2b_3p0>; + vdda18-supply = <&vreg_l1c_1p8>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l6b_1p2>; + vdda-pll-supply = <&vreg_l1b_0p8>; +}; + +&usb_2 { + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_2_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l10c_0p8>; + vdda33-supply = <&vreg_l2b_3p0>; + vdda18-supply = <&vreg_l1c_1p8>; +}; + +/* PINCTRL - additions to nodes defined in sc7280.dtsi */ + +&qup_uart5_default { + tx { + pins = "gpio46"; + drive-strength = <2>; + bias-disable; + }; + + rx { + pins = "gpio47"; + drive-strength = <2>; + bias-pull-up; + }; +};