[PATCH 1/4] mmc: dw_mmc: fix the transmission handling in IDMAC
From: Seungwon Jeon <hidden>
Date: 2012-05-20 04:27:23
DTO interrupt can be later than transmit interrupt(IDMAC) in case of write. Current handling of IDMAC interrupt sets EVENT_DATA_COMPLETE as well as EVENT_XFER_COMPLETE regardless DTO rising. This makes the current request be finished in tasklet and permits the next request even though current data transfer is still in progress. As a result, sequence is broken and lock-up happens. Setting EVENT_DATA_COMPLETE is not proper after IDMAC interrupt. It should be taken after DTO interrupt is generated. Reported-by: Dmitry Shmidt <redacted> Signed-off-by: Seungwon Jeon <redacted> --- drivers/mmc/host/dw_mmc.c | 1 - 1 files changed, 0 insertions(+), 1 deletions(-)
diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c
index 9bbf45f..b46faf0 100644
--- a/drivers/mmc/host/dw_mmc.c
+++ b/drivers/mmc/host/dw_mmc.c@@ -1623,7 +1623,6 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) { mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI); mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI); - set_bit(EVENT_DATA_COMPLETE, &host->pending_events); host->dma_ops->complete(host); } #endif
--
1.7.0.4