On Tue, Jul 14, 2020 at 01:32:24PM +0800, 周琰杰 (Zhou Yanjie) wrote:

v3->v4:
1.Modify the commit message and add the change description
  for CU1000-Neo in patch [2/5].
2.The wrongly written "ingenic,x1000" in compatible is
  changed to "ingenic,x1000e" in "cu1000-neo.dts".
3.Adjust the order of nodes according to the corresponding
  address value for X1000.
4.Drop unnecessary node in "wlan_pwrseq" in "cu1000-neo.dts".
5.Add the leds node to "cu1000-neo.dts".

周琰杰 (Zhou Yanjie) (5):
  MIPS: Ingenic: Add Ingenic X1830 support.
  dt-bindings: MIPS: Add X1830 based CU1830-Neo and fix bug in
    CU1000-Neo.
  MIPS: Ingenic: Add YSH & ATIL CU Neo board support.
  MIPS: Ingenic: Fix bugs and add missing LED node for X1000.
  MIPS: CU1000-Neo: Refresh defconfig to support LED.

 .../devicetree/bindings/mips/ingenic/devices.yaml  |  12 +-
 arch/mips/boot/dts/ingenic/Makefile                |   1 +
 arch/mips/boot/dts/ingenic/cu1000-neo.dts          | 114 ++++----
 arch/mips/boot/dts/ingenic/cu1830-neo.dts          | 168 ++++++++++++
 arch/mips/boot/dts/ingenic/x1000.dtsi              | 126 +++++----
 arch/mips/boot/dts/ingenic/x1830.dtsi              | 300 +++++++++++++++++++++
 arch/mips/configs/cu1000-neo_defconfig             |   4 +
 arch/mips/configs/cu1830-neo_defconfig             | 123 +++++++++
 arch/mips/jz4740/Kconfig                           |  10 +
 9 files changed, 733 insertions(+), 125 deletions(-)
 create mode 100644 arch/mips/boot/dts/ingenic/cu1830-neo.dts
 create mode 100644 arch/mips/boot/dts/ingenic/x1830.dtsi
 create mode 100644 arch/mips/configs/cu1830-neo_defconfig

series applied to mips-next.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]