[PATCH] media: v4l: cadence: Handle errors of clk_prepare_enable()
DORMANTno replies
From: Evgeny Novikov <hidden>
Date: 2021-05-17 12:49:25
Also in:
lkml
Subsystem:
cadence mipi-csi2 bridges, media input infrastructure (v4l/dvb), the rest · Maintainers:
Maxime Ripard, Mauro Carvalho Chehab, Linus Torvalds
Handle errors of clk_prepare_enable() in csi2tx_get_resources(). Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Evgeny Novikov <redacted> --- drivers/media/platform/cadence/cdns-csi2tx.c | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/media/platform/cadence/cdns-csi2tx.c b/drivers/media/platform/cadence/cdns-csi2tx.c
index e4d08acfbb49..765ae408970a 100644
--- a/drivers/media/platform/cadence/cdns-csi2tx.c
+++ b/drivers/media/platform/cadence/cdns-csi2tx.c@@ -436,6 +436,7 @@ static int csi2tx_get_resources(struct csi2tx_priv *csi2tx, struct resource *res; unsigned int i; u32 dev_cfg; + int ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); csi2tx->base = devm_ioremap_resource(&pdev->dev, res);
@@ -454,7 +455,12 @@ static int csi2tx_get_resources(struct csi2tx_priv *csi2tx, return PTR_ERR(csi2tx->esc_clk); } - clk_prepare_enable(csi2tx->p_clk); + ret = clk_prepare_enable(csi2tx->p_clk); + if (ret) { + dev_err(&pdev->dev, "Couldn't prepare and enable p_clk\n"); + return ret; + } + dev_cfg = readl(csi2tx->base + CSI2TX_DEVICE_CONFIG_REG); clk_disable_unprepare(csi2tx->p_clk);
--
2.26.2