[linux-dvb] me-tv doesn't accept its own channel file

4 messages, 3 authors, 2009-01-03 · open the first message on its own page

[linux-dvb] me-tv doesn't accept its own channel file

From: Jonathan Coles <hidden>
Date: 2008-09-21 17:48:19

me-tv scans ATSC channels on my HVR-950Q and creates a channels.conf 
file. The file has channel entries, even though the Channel Scan window 
reports nothing but "Failed to tune" messages. But me-tv cannot use its 
own file. It complains, "There's an invalid channel record in the 
channels.conf file." Oh, come on! Was this application tested even once?

My file contains the following:

CKXTDT:509028615:8VSB:65:67:2
CKXT:509028615:8VSB:81:83:3
HDTV RADIO-CANADA OTTAWA:521028615:8VSB:49:52:11
HDTV CBC OTTAWA:539028615:8VSB:49:52:10

(I live in Canada. Our TV stations have until 2011 to go digital and 
they are moving slowly.)

A possible problem is the strange 2-byte character following "CKXTDT" in 
the first line, hex 0810. Removing this line did not make the file 
acceptable to me-tv.

Does anyone have experience with this glitch?


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] me-tv doesn't accept its own channel file

From: Steven Toth <hidden>
Date: 2008-09-22 02:19:59

Jonathan Coles wrote:
me-tv scans ATSC channels on my HVR-950Q and creates a channels.conf 
file. The file has channel entries, even though the Channel Scan window 
reports nothing but "Failed to tune" messages. But me-tv cannot use its 
own file. It complains, "There's an invalid channel record in the 
channels.conf file." Oh, come on! Was this application tested even once?

My file contains the following:

CKXTDT:509028615:8VSB:65:67:2
CKXT:509028615:8VSB:81:83:3
HDTV RADIO-CANADA OTTAWA:521028615:8VSB:49:52:11
HDTV CBC OTTAWA:539028615:8VSB:49:52:10

(I live in Canada. Our TV stations have until 2011 to go digital and 
they are moving slowly.)

A possible problem is the strange 2-byte character following "CKXTDT" in 
the first line, hex 0810. Removing this line did not make the file 
acceptable to me-tv.

Does anyone have experience with this glitch?
Looks like you have a weird control char on the first line.

Try removing this.

Also use 'azap -r CKTX' to see if you get lock.

- Steve

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] me-tv doesn't accept its own channel file

From: Jonathan Coles <hidden>
Date: 2008-09-22 10:23:12

Steven Toth wrote:
Jonathan Coles wrote:
quoted
me-tv scans ATSC channels on my HVR-950Q and creates a channels.conf 
file. The file has channel entries, even though the Channel Scan 
window reports nothing but "Failed to tune" messages. But me-tv 
cannot use its own file. It complains, "There's an invalid channel 
record in the channels.conf file." Oh, come on! Was this application 
tested even once?

My file contains the following:

CKXTDT:509028615:8VSB:65:67:2
CKXT:509028615:8VSB:81:83:3
HDTV RADIO-CANADA OTTAWA:521028615:8VSB:49:52:11
HDTV CBC OTTAWA:539028615:8VSB:49:52:10

(I live in Canada. Our TV stations have until 2011 to go digital and 
they are moving slowly.)

A possible problem is the strange 2-byte character following "CKXTDT" 
in the first line, hex 0810. Removing this line did not make the file 
acceptable to me-tv.

Does anyone have experience with this glitch?
Looks like you have a weird control char on the first line.

Try removing this.

Also use 'azap -r CKTX' to see if you get lock.

- Steve
This is a me-tv problem. Using the same channels file, I can watch TV 
using gxine. azap returns
"video pid 0x0051, audio pid 0x0053" and then repeats the line

status 1f | signal 0078 | snr 0073 | ber 000000ff | unc 000000ff | 
FE_HAS_LOCK

Thanks for your help.


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] me-tv doesn't accept its own channel file

From: Michael Lamothe <hidden>
Date: 2009-01-03 02:59:08

"Oh, come on! Was this application tested even once?"

Nope, that's why ATSC support has been removed in the newer versions,
there's no one testing it.

If you have an issue with Me TV then you probably should raise that
with upstream.

Thanks,

Michael

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help