expm1(3p): Mathematical error in given example

7 messages, 5 authors, 2021-02-14 · open the first message on its own page

expm1(3p): Mathematical error in given example

From: <hidden>
Date: 2021-02-11 10:03:56 

  Hi there!

In the APPLICATION USAGE section of expm1(3p)[1] the given example is wrong:

===8<=== Snip =========================================

[..] calculations of ((1+x)n-1)/x, namely:

           expm1(n * log1p(x))/x

======== Snap ====================================>8===

Actually, both expressions are not equal, rather

 expm1(n * log1p(x))/x = ((1+x)**n - 1)/x

(with a fictional ** as power infix-operator) would be.


  Best regards
          -- XA

____
[1] As of version to be found at
    https://man7.org/linux/man-pages/man3/expm1.3p.html
--
XenoAntares

AW: expm1(3p): Mathematical error in given example

From: Walter Harms <hidden>
Date: 2021-02-11 10:59:51 

yes, this is wrong on the webpage but issems a converter bug.
when i look at the page in ascii i see:  ((1+x)**n-1)/x.

the same problem arises on other place like:
These functions shall compute ex-1.0.
should read: e**x-1.0

NTL: thx for info

 wh
________________________________________
Von: xenoantares@gmx.net [off-list ref]
Gesendet: Donnerstag, 11. Februar 2021 10:59:18
An: mtk.manpages@gmail.com; alx.manpages@gmail.com
Cc: linux-man@vger.kernel.org
Betreff: expm1(3p): Mathematical error in given example

  Hi there!

In the APPLICATION USAGE section of expm1(3p)[1] the given example is wrong:

===8<=== Snip =========================================

[..] calculations of ((1+x)n-1)/x, namely:

           expm1(n * log1p(x))/x

======== Snap ====================================>8===

Actually, both expressions are not equal, rather

 expm1(n * log1p(x))/x = ((1+x)**n - 1)/x

(with a fictional ** as power infix-operator) would be.


  Best regards
          -- XA

____
[1] As of version to be found at
    https://man7.org/linux/man-pages/man3/expm1.3p.html
--
XenoAntares

Re: expm1(3p): Mathematical error in given example

From: Alejandro Colomar (man-pages) <hidden>
Date: 2021-02-11 15:54:09 

Hi XA,

On 2/11/21 10:59 AM, xenoantares@gmx.net wrote:
  Hi there!

In the APPLICATION USAGE section of expm1(3p)[1] the given example is wrong:

===8<=== Snip =========================================

[..] calculations of ((1+x)n-1)/x, namely:

           expm1(n * log1p(x))/x

======== Snap ====================================>8===

Actually, both expressions are not equal, rather

 expm1(n * log1p(x))/x = ((1+x)**n - 1)/x

(with a fictional ** as power infix-operator) would be.


  Best regards
          -- XA

____
[1] As of version to be found at
    https://man7.org/linux/man-pages/man3/expm1.3p.html
--
XenoAntares
We don't maintain the source of the POSIX manual pages.  You could file
a bug to the Austin Group.  I checked that in expm1(3) that doesn't happen.

Thanks,

Alex

-- 
Alejandro Colomar
Linux man-pages comaintainer; https://www.kernel.org/doc/man-pages/
http://www.alejandro-colomar.es/

Re: expm1(3p): Mathematical error in given example

From: Jakub Wilk <hidden>
Date: 2021-02-12 09:42:15 

* Alejandro Colomar [off-list ref], 2021-02-11, 16:49:
quoted
In the APPLICATION USAGE section of expm1(3p)[1] the given example is wrong:

===8<=== Snip =========================================

[..] calculations of ((1+x)n-1)/x, namely:

          expm1(n * log1p(x))/x

======== Snap ====================================>8===

Actually, both expressions are not equal, rather

expm1(n * log1p(x))/x = ((1+x)**n - 1)/x

(with a fictional ** as power infix-operator) would be.
[...]
We don't maintain the source of the POSIX manual pages.  You could file 
a bug to the Austin Group.
As Walter noted in another mail, the POSIX sources are correct.

This is a problem with conversion to the man page format, which should 
be reported here, not to the Austin Group.

-- 
Jakub Wilk

Re: expm1(3p): Mathematical error in given example

From: Michael Kerrisk (man-pages) <hidden>
Date: 2021-02-14 11:35:32 

On 2/12/21 10:41 AM, Jakub Wilk wrote:
* Alejandro Colomar [off-list ref], 2021-02-11, 16:49:
quoted
quoted
In the APPLICATION USAGE section of expm1(3p)[1] the given example is wrong:

===8<=== Snip =========================================

[..] calculations of ((1+x)n-1)/x, namely:

          expm1(n * log1p(x))/x

======== Snap ====================================>8===

Actually, both expressions are not equal, rather

expm1(n * log1p(x))/x = ((1+x)**n - 1)/x

(with a fictional ** as power infix-operator) would be.
[...]
quoted
We don't maintain the source of the POSIX manual pages.  You could file 
a bug to the Austin Group.
As Walter noted in another mail, the POSIX sources are correct.

This is a problem with conversion to the man page format, which should 
be reported here, not to the Austin Group.
Indeed, it is a problem in the conversion. Or, more precisely, the
POSIX manual pages are using \u...\d to achieve superscripting
for exponentiation, which of course does not render meaningfully
on a terminal. The issue affects 19 pages that I found. I plan
to apply the patch below, which uses the fictional '**' operator
to indicate power-of. Seem okay?

Thanks,

Michael

diff --git a/man-pages-posix-2017/man0p/complex.h.0p b/man-pages-posix-2017/man0p/complex.h.0p
index ccc21a7..da37e54 100644
--- a/man-pages-posix-2017/man0p/complex.h.0p
+++ b/man-pages-posix-2017/man0p/complex.h.0p
@@ -31,7 +31,7 @@ Expands to a constant expression of type
 .BR "const float _Complex" ,
 with the value of the imaginary unit (that is, a number
 .IR i
-such that \fIi\fR\s-3\u2\d\s+3=\-1).
+such that \fIi\fR**2=\-1).
 .IP imaginary 12
 Expands to
 .BR _Imaginary .
diff --git a/man-pages-posix-2017/man0p/stdint.h.0p b/man-pages-posix-2017/man0p/stdint.h.0p
index 5acc838..3ccc8cc 100644
--- a/man-pages-posix-2017/man0p/stdint.h.0p
+++ b/man-pages-posix-2017/man0p/stdint.h.0p
@@ -38,11 +38,11 @@ its value in a pure binary system; the actual type may use more bits
 than that (for example, a 28-bit type could be stored in 32 bits of
 actual storage). An
 .IR N -bit
-signed type has values in the range \-2\s-3\u\fIN\fR\-1\d\s+3 or
-1\-2\s-3\u\fIN\fR\-1\d\s+3 to 2\s-3\u\fIN\fR\-1\d\s+3\-1, while
+signed type has values in the range \-2**(\fIN\fR\-1) or
+1\-2**(\fIN\fR\-1) to 2**(\fIN\fR\-1)\-1, while
 an
 .IR N -bit
-unsigned type has values in the range 0 to 2\s-3\u\fIN\fR\d\s+3\-1.
+unsigned type has values in the range 0 to 2**\fIN\fR\-1.
 .P
 .P
 Types are defined in the following categories:
diff --git a/man-pages-posix-2017/man0p/sys_socket.h.0p b/man-pages-posix-2017/man0p/sys_socket.h.0p
index 02b7e4b..bd6e5b4 100644
--- a/man-pages-posix-2017/man0p/sys_socket.h.0p
+++ b/man-pages-posix-2017/man0p/sys_socket.h.0p
@@ -443,7 +443,7 @@ may also make visible all symbols from
 .IR "The following sections are informative."
 .SH "APPLICATION USAGE"
 To forestall portability problems, it is recommended that applications
-not use values larger than 2\u\s-331\s+3\d \-1 for the
+not use values larger than 2**31 \-1 for the
 .BR socklen_t
 type.
 .P
diff --git a/man-pages-posix-2017/man1p/bc.1p b/man-pages-posix-2017/man1p/bc.1p
index fa8bf2e..2beda41 100644
--- a/man-pages-posix-2017/man1p/bc.1p
+++ b/man-pages-posix-2017/man1p/bc.1p
@@ -650,7 +650,7 @@ if
 is less than 10. For
 .BR obase
 values other than 10, this should be the number of digits needed to
-represent a precision of 10\u\s-3\fIs\fP\s+3\d.
+represent a precision of 10**\fIs\fP.
 .P
 For
 .BR obase
diff --git a/man-pages-posix-2017/man1p/cksum.1p b/man-pages-posix-2017/man1p/cksum.1p
index 73ea9b6..2bf2b05 100644
--- a/man-pages-posix-2017/man1p/cksum.1p
+++ b/man-pages-posix-2017/man1p/cksum.1p
@@ -29,7 +29,8 @@ polynomial:
 .RS 4
 .nf
 
-\fIG\fR(\fIx\fR)=\fIx\fR\u\s-332\s+3\d+\fIx\fR\u\s-326\s+3\d+\fIx\fR\u\s-323\s+3\d+\fIx\fR\u\s-322\s+3\d+\fIx\fR\u\s-316\s+3\d+\fIx\fR\u\s-312\s+3\d+\fIx\fR\u\s-311\s+3\d+\fIx\fR\u\s-310\s+3\d+\fIx\fR\u\s-38\s+3\d+\fIx\fR\u\s-37\s+3\d+\fIx\fR\u\s-35\s+3\d+\fIx\fR\u\s-34\s+3\d+\fIx\fR\u\s-32\s+3\d+\fIx\fR+1
+\fIG\fR(\fIx\fR)=\fIx\fR**32+\fIx\fR**26+\fIx\fR**23+\fIx\fR**22+\fIx\fR**16+\fIx\fR**12+\fIx\fR**11+
+     \fIx\fR**10+\fIx\fR**8+\fIx\fR**7+\fIx\fR**5+\fIx\fR**4+\fIx\fR**2+\fIx\fR+1
 .fi
 .P
 .RE
@@ -58,7 +59,7 @@ capable of representing this integer shall be used.
 .IR M (\c
 .IR x )
 is multiplied by
-.IR x \u\s-332\s+3\d
+.IR x **32
 (that is, shifted left 32 bits) and divided by
 .IR G (\c
 .IR x )
diff --git a/man-pages-posix-2017/man1p/pax.1p b/man-pages-posix-2017/man1p/pax.1p
index cd34bb2..db39781 100644
--- a/man-pages-posix-2017/man1p/pax.1p
+++ b/man-pages-posix-2017/man1p/pax.1p
@@ -3191,7 +3191,7 @@ block value of 10\|240 bytes for
 .IR tar
 was selected because that is the standard block-size value for BSD
 .IR tar .
-The maximum block size of 32\|256 bytes (2\s-3\u15\d\s+3\-512 bytes)
+The maximum block size of 32\|256 bytes (2**15\-512 bytes)
 is the largest multiple of 512 bytes that fits into a signed 16-bit
 tape controller transfer register. There are known limitations in some
 historical systems that would prevent larger blocks from being
diff --git a/man-pages-posix-2017/man3p/cexp.3p b/man-pages-posix-2017/man3p/cexp.3p
index 7d6cd7c..388f449 100644
--- a/man-pages-posix-2017/man3p/cexp.3p
+++ b/man-pages-posix-2017/man3p/cexp.3p
@@ -28,7 +28,7 @@ ISO\ C standard is unintentional. This volume of POSIX.1\(hy2017 defers to the I
 .P
 These functions shall compute the complex exponent of
 .IR z ,
-defined as \fIe\s-3\uz\d\s+3\fR.
+defined as \fIe**z\fR.
 .SH "RETURN VALUE"
 These functions shall return the complex exponential value of
 .IR z .
diff --git a/man-pages-posix-2017/man3p/cpow.3p b/man-pages-posix-2017/man3p/cpow.3p
index bb53e62..e0d673d 100644
--- a/man-pages-posix-2017/man3p/cpow.3p
+++ b/man-pages-posix-2017/man3p/cpow.3p
@@ -28,7 +28,7 @@ ISO\ C standard. Any conflict between the requirements described here and the
 ISO\ C standard is unintentional. This volume of POSIX.1\(hy2017 defers to the ISO\ C standard.
 .P
 These functions shall compute the complex power function
-\fIx\s-3\uy\d\s+3\fR, with a branch cut for the first parameter along
+\fIx**y\fR, with a branch cut for the first parameter along
 the negative real axis.
 .SH "RETURN VALUE"
 These functions shall return the complex power function value.
diff --git a/man-pages-posix-2017/man3p/drand48.3p b/man-pages-posix-2017/man3p/drand48.3p
index 7157971..29c58a0 100644
--- a/man-pages-posix-2017/man3p/drand48.3p
+++ b/man-pages-posix-2017/man3p/drand48.3p
@@ -52,14 +52,14 @@ The
 and
 \fInrand48\fR()
 functions shall return non-negative, long integers, uniformly
-distributed over the interval [0,2\u\s-331\s+3\d).
+distributed over the interval [0,2**31).
 .P
 The
 \fImrand48\fR()
 and
 \fIjrand48\fR()
 functions shall return signed long integers uniformly distributed over
-the interval [\-2\u\s-331\s+3\d,2\u\s-331\s+3\d).
+the interval [\-2**31,2**31).
 .P
 The
 \fIsrand48\fR(),
diff --git a/man-pages-posix-2017/man3p/exp2.3p b/man-pages-posix-2017/man3p/exp2.3p
index 23cb8bf..c49f455 100644
--- a/man-pages-posix-2017/man3p/exp2.3p
+++ b/man-pages-posix-2017/man3p/exp2.3p
@@ -39,7 +39,7 @@ is non-zero or \fIfetestexcept\fR(FE_INVALID | FE_DIVBYZERO |
 FE_OVERFLOW | FE_UNDERFLOW) is non-zero, an error has occurred.
 .SH "RETURN VALUE"
 Upon successful completion, these functions shall return
-2\fI\s-3\ux\d\s+3\fR.
+2\fI**x\fR.
 .P
 If the correct value would cause overflow, a range error shall occur
 and
diff --git a/man-pages-posix-2017/man3p/expm1.3p b/man-pages-posix-2017/man3p/expm1.3p
index 8db897e..5fb15c1 100644
--- a/man-pages-posix-2017/man3p/expm1.3p
+++ b/man-pages-posix-2017/man3p/expm1.3p
@@ -26,7 +26,7 @@ The functionality described on this reference page is aligned with the
 ISO\ C standard. Any conflict between the requirements described here and the
 ISO\ C standard is unintentional. This volume of POSIX.1\(hy2017 defers to the ISO\ C standard.
 .P
-These functions shall compute \fIe\u\s-3x\s+3\d\fR\-1.0.
+These functions shall compute \fIe**x\fR\-1.0.
 .P
 An application wishing to check for error situations should set
 .IR errno
@@ -38,7 +38,7 @@ is non-zero or \fIfetestexcept\fR(FE_INVALID | FE_DIVBYZERO |
 FE_OVERFLOW | FE_UNDERFLOW) is non-zero, an error has occurred.
 .SH "RETURN VALUE"
 Upon successful completion, these functions return
-\fIe\s-3\ux\d\s+3\fR\-1.0.
+\fIe**x\fR\-1.0.
 .P
 If the correct value would cause overflow, a range error shall occur
 and
@@ -131,7 +131,7 @@ The
 and
 \fIlog1p\fR()
 functions are useful for financial calculations of
-((1+\fIx\fR)\u\s-3\fIn\fR\s+3\d\-1)/\fIx\fR, namely:
+((1+\fIx\fR)**\fIn\fR\-1)/\fIx\fR, namely:
 .sp
 .RS 4
 .nf
diff --git a/man-pages-posix-2017/man3p/hypot.3p b/man-pages-posix-2017/man3p/hypot.3p
index 095a572..f099eed 100644
--- a/man-pages-posix-2017/man3p/hypot.3p
+++ b/man-pages-posix-2017/man3p/hypot.3p
@@ -27,8 +27,8 @@ ISO\ C standard. Any conflict between the requirements described here and the
 ISO\ C standard is unintentional. This volume of POSIX.1\(hy2017 defers to the ISO\ C standard.
 .P
 These functions shall compute the value of the square root of
-.IR x \s-3\u2\d\s+3+\c
-.IR y \s-3\u2\d\s+3
+.IR x **2+\c
+.IR y **2
 without undue overflow or underflow.
 .P
 An application wishing to check for error situations should set
diff --git a/man-pages-posix-2017/man3p/initstate.3p b/man-pages-posix-2017/man3p/initstate.3p
index dcb3cc0..2683bc5 100644
--- a/man-pages-posix-2017/man3p/initstate.3p
+++ b/man-pages-posix-2017/man3p/initstate.3p
@@ -30,13 +30,13 @@ function shall use a non-linear additive feedback random-number
 generator employing a default state array size of 31
 .BR long
 integers to return successive pseudo-random numbers in the range from 0
-to 2\u\s-331\s+3\d\-1. The period of this random-number generator is
-approximately 16 x (2\s-3\u31\d\s+3\-\fR1). The size of the state
+to 2**31\-1. The period of this random-number generator is
+approximately 16 x (2**31\-\fR1). The size of the state
 array determines the period of the random-number generator. Increasing
 the state array size shall increase the period.
 .P
 With 256 bytes of state information, the period of the random-number
-generator shall be greater than 2\s-3\u69\d\s+3.
+generator shall be greater than 2**69.
 .P
 Like
 \fIrand\fR(),
diff --git a/man-pages-posix-2017/man3p/ldexp.3p b/man-pages-posix-2017/man3p/ldexp.3p
index 86196d9..63b718a 100644
--- a/man-pages-posix-2017/man3p/ldexp.3p
+++ b/man-pages-posix-2017/man3p/ldexp.3p
@@ -27,7 +27,7 @@ ISO\ C standard. Any conflict between the requirements described here and the
 ISO\ C standard is unintentional. This volume of POSIX.1\(hy2017 defers to the ISO\ C standard.
 .P
 These functions shall compute the quantity
-\fIx\fR\ *\ 2\u\s-3\fIexp\fR\s+3\d.
+\fIx\fR\ *\ 2**\fIexp\fR.
 .P
 An application wishing to check for error situations should set
 .IR errno
diff --git a/man-pages-posix-2017/man3p/logb.3p b/man-pages-posix-2017/man3p/logb.3p
index 1f1b4de..09bb1c6 100644
--- a/man-pages-posix-2017/man3p/logb.3p
+++ b/man-pages-posix-2017/man3p/logb.3p
@@ -47,7 +47,7 @@ finite positive
 .RS 4
 .nf
 
-1 <= \fIx\fP * FLT_RADIX\s-3\u-logb(x)\d\s+3 < FLT_RADIX
+1 <= \fIx\fP * FLT_RADIX**(-logb(x)) < FLT_RADIX
 .fi
 .P
 .RE
diff --git a/man-pages-posix-2017/man3p/pow.3p b/man-pages-posix-2017/man3p/pow.3p
index 1e28125..4cbee11 100644
--- a/man-pages-posix-2017/man3p/pow.3p
+++ b/man-pages-posix-2017/man3p/pow.3p
@@ -30,7 +30,7 @@ These functions shall compute the value of
 .IR x
 raised to the power
 .IR y ,
-.IR x\u\s-3y\s+3\d .
+.IR x**y .
 If
 .IR x
 is negative, the application shall ensure that
diff --git a/man-pages-posix-2017/man3p/rand.3p b/man-pages-posix-2017/man3p/rand.3p
index 63c9cdf..889bac0 100644
--- a/man-pages-posix-2017/man3p/rand.3p
+++ b/man-pages-posix-2017/man3p/rand.3p
@@ -35,7 +35,7 @@ The
 function shall compute a sequence of pseudo-random integers in the
 range [0,\c
 {RAND_MAX}]
-with a period of at least 2\u\s-332\s0\d.
+with a period of at least 2**32
 .P
 The
 \fIrand\fR()
diff --git a/man-pages-posix-2017/man3p/remquo.3p b/man-pages-posix-2017/man3p/remquo.3p
index 1a609f1..00f4f23 100644
--- a/man-pages-posix-2017/man3p/remquo.3p
+++ b/man-pages-posix-2017/man3p/remquo.3p
@@ -41,7 +41,7 @@ functions, respectively. In the object pointed to by
 they store a value whose sign is the sign of
 .IR x /\c
 .IR y
-and whose magnitude is congruent modulo 2\fI\s-3\un\d\s+3\fR to the
+and whose magnitude is congruent modulo 2\fI**n\fR to the
 magnitude of the integral quotient of
 .IR x /\c
 .IR y ,
diff --git a/man-pages-posix-2017/man3p/scalbln.3p b/man-pages-posix-2017/man3p/scalbln.3p
index 788ce42..13fa729 100644
--- a/man-pages-posix-2017/man3p/scalbln.3p
+++ b/man-pages-posix-2017/man3p/scalbln.3p
@@ -32,8 +32,8 @@ The functionality described on this reference page is aligned with the
 ISO\ C standard. Any conflict between the requirements described here and the
 ISO\ C standard is unintentional. This volume of POSIX.1\(hy2017 defers to the ISO\ C standard.
 .P
-These functions shall compute \fIx\fR\ *\ FLT_RADIX\fI\s-3\un\d\s+3\fR
-efficiently, not normally by computing FLT_RADIX\fI\s-3\un\d\s+3\fR
+These functions shall compute \fIx\fR\ *\ FLT_RADIX**\fIn\fR
+efficiently, not normally by computing FLT_RADIX**\fIn\fR
 explicitly.
 .P
 An application wishing to check for error situations should set
@@ -46,7 +46,7 @@ is non-zero or \fIfetestexcept\fR(FE_INVALID | FE_DIVBYZERO |
 FE_OVERFLOW | FE_UNDERFLOW) is non-zero, an error has occurred.
 .SH "RETURN VALUE"
 Upon successful completion, these functions shall return
-\fIx\fR\ *\ FLT_RADIX\fI\s-3\un\d\s+3\fR.
+\fIx\fR\ *\ FLT_RADIX**\fIn\fR.
 .P
 If the result would cause overflow, a range error shall occur and these
 functions shall return \(+-HUGE_VAL, \(+-HUGE_VALF, and \(+-HUGE_VALL



-- 
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/

Re: expm1(3p): Mathematical error in given example

From: Alejandro Colomar (man-pages) <hidden>
Date: 2021-02-14 12:24:17 

Hi Michael,

On 2/14/21 12:34 PM, Michael Kerrisk (man-pages) wrote:
On 2/12/21 10:41 AM, Jakub Wilk wrote:
quoted
* Alejandro Colomar [off-list ref], 2021-02-11, 16:49:
quoted
quoted
In the APPLICATION USAGE section of expm1(3p)[1] the given example is wrong:

===8<=== Snip =========================================

[..] calculations of ((1+x)n-1)/x, namely:

          expm1(n * log1p(x))/x

======== Snap ====================================>8===

Actually, both expressions are not equal, rather

expm1(n * log1p(x))/x = ((1+x)**n - 1)/x

(with a fictional ** as power infix-operator) would be.
[...]
quoted
We don't maintain the source of the POSIX manual pages.  You could file 
a bug to the Austin Group.
As Walter noted in another mail, the POSIX sources are correct.

This is a problem with conversion to the man page format, which should 
be reported here, not to the Austin Group.
Indeed, it is a problem in the conversion. Or, more precisely, the
POSIX manual pages are using \u...\d to achieve superscripting
for exponentiation, which of course does not render meaningfully
on a terminal.
I guess this is caused by posix.py, right?  If so, would you mind
patching that so that future POSIX revisions are also fixed?
I don't understand that file so much...

The issue affects 19 pages that I found. I plan
to apply the patch below, which uses the fictional '**' operator
to indicate power-of. Seem okay?
I didn't read all of them, but from the first few, looks good to me.

Thanks,

Alex
quoted hunk
Thanks,

Michael

diff --git a/man-pages-posix-2017/man0p/complex.h.0p b/man-pages-posix-2017/man0p/complex.h.0p
index ccc21a7..da37e54 100644
--- a/man-pages-posix-2017/man0p/complex.h.0p
+++ b/man-pages-posix-2017/man0p/complex.h.0p
@@ -31,7 +31,7 @@ Expands to a constant expression of type
 .BR "const float _Complex" ,
 with the value of the imaginary unit (that is, a number
 .IR i
-such that \fIi\fR\s-3\u2\d\s+3=\-1).
+such that \fIi\fR**2=\-1).
 .IP imaginary 12
 Expands to
 .BR _Imaginary .
diff --git a/man-pages-posix-2017/man0p/stdint.h.0p b/man-pages-posix-2017/man0p/stdint.h.0p
index 5acc838..3ccc8cc 100644
--- a/man-pages-posix-2017/man0p/stdint.h.0p
+++ b/man-pages-posix-2017/man0p/stdint.h.0p
@@ -38,11 +38,11 @@ its value in a pure binary system; the actual type may use more bits
 than that (for example, a 28-bit type could be stored in 32 bits of
 actual storage). An
 .IR N -bit
-signed type has values in the range \-2\s-3\u\fIN\fR\-1\d\s+3 or
-1\-2\s-3\u\fIN\fR\-1\d\s+3 to 2\s-3\u\fIN\fR\-1\d\s+3\-1, while
+signed type has values in the range \-2**(\fIN\fR\-1) or
+1\-2**(\fIN\fR\-1) to 2**(\fIN\fR\-1)\-1, while
 an
 .IR N -bit
-unsigned type has values in the range 0 to 2\s-3\u\fIN\fR\d\s+3\-1.
+unsigned type has values in the range 0 to 2**\fIN\fR\-1.
 .P
 .P
 Types are defined in the following categories:
diff --git a/man-pages-posix-2017/man0p/sys_socket.h.0p b/man-pages-posix-2017/man0p/sys_socket.h.0p
index 02b7e4b..bd6e5b4 100644
--- a/man-pages-posix-2017/man0p/sys_socket.h.0p
+++ b/man-pages-posix-2017/man0p/sys_socket.h.0p
@@ -443,7 +443,7 @@ may also make visible all symbols from
 .IR "The following sections are informative."
 .SH "APPLICATION USAGE"
 To forestall portability problems, it is recommended that applications
-not use values larger than 2\u\s-331\s+3\d \-1 for the
+not use values larger than 2**31 \-1 for the
 .BR socklen_t
 type.
 .P
diff --git a/man-pages-posix-2017/man1p/bc.1p b/man-pages-posix-2017/man1p/bc.1p
index fa8bf2e..2beda41 100644
--- a/man-pages-posix-2017/man1p/bc.1p
+++ b/man-pages-posix-2017/man1p/bc.1p
@@ -650,7 +650,7 @@ if
 is less than 10. For
 .BR obase
 values other than 10, this should be the number of digits needed to
-represent a precision of 10\u\s-3\fIs\fP\s+3\d.
+represent a precision of 10**\fIs\fP.
 .P
 For
 .BR obase
diff --git a/man-pages-posix-2017/man1p/cksum.1p b/man-pages-posix-2017/man1p/cksum.1p
index 73ea9b6..2bf2b05 100644
--- a/man-pages-posix-2017/man1p/cksum.1p
+++ b/man-pages-posix-2017/man1p/cksum.1p
@@ -29,7 +29,8 @@ polynomial:
 .RS 4
 .nf
 
-\fIG\fR(\fIx\fR)=\fIx\fR\u\s-332\s+3\d+\fIx\fR\u\s-326\s+3\d+\fIx\fR\u\s-323\s+3\d+\fIx\fR\u\s-322\s+3\d+\fIx\fR\u\s-316\s+3\d+\fIx\fR\u\s-312\s+3\d+\fIx\fR\u\s-311\s+3\d+\fIx\fR\u\s-310\s+3\d+\fIx\fR\u\s-38\s+3\d+\fIx\fR\u\s-37\s+3\d+\fIx\fR\u\s-35\s+3\d+\fIx\fR\u\s-34\s+3\d+\fIx\fR\u\s-32\s+3\d+\fIx\fR+1
+\fIG\fR(\fIx\fR)=\fIx\fR**32+\fIx\fR**26+\fIx\fR**23+\fIx\fR**22+\fIx\fR**16+\fIx\fR**12+\fIx\fR**11+
+     \fIx\fR**10+\fIx\fR**8+\fIx\fR**7+\fIx\fR**5+\fIx\fR**4+\fIx\fR**2+\fIx\fR+1
 .fi
 .P
 .RE
@@ -58,7 +59,7 @@ capable of representing this integer shall be used.
 .IR M (\c
 .IR x )
 is multiplied by
-.IR x \u\s-332\s+3\d
+.IR x **32
 (that is, shifted left 32 bits) and divided by
 .IR G (\c
 .IR x )
diff --git a/man-pages-posix-2017/man1p/pax.1p b/man-pages-posix-2017/man1p/pax.1p
index cd34bb2..db39781 100644
--- a/man-pages-posix-2017/man1p/pax.1p
+++ b/man-pages-posix-2017/man1p/pax.1p
@@ -3191,7 +3191,7 @@ block value of 10\|240 bytes for
 .IR tar
 was selected because that is the standard block-size value for BSD
 .IR tar .
-The maximum block size of 32\|256 bytes (2\s-3\u15\d\s+3\-512 bytes)
+The maximum block size of 32\|256 bytes (2**15\-512 bytes)
 is the largest multiple of 512 bytes that fits into a signed 16-bit
 tape controller transfer register. There are known limitations in some
 historical systems that would prevent larger blocks from being
diff --git a/man-pages-posix-2017/man3p/cexp.3p b/man-pages-posix-2017/man3p/cexp.3p
index 7d6cd7c..388f449 100644
--- a/man-pages-posix-2017/man3p/cexp.3p
+++ b/man-pages-posix-2017/man3p/cexp.3p
@@ -28,7 +28,7 @@ ISO\ C standard is unintentional. This volume of POSIX.1\(hy2017 defers to the I
 .P
 These functions shall compute the complex exponent of
 .IR z ,
-defined as \fIe\s-3\uz\d\s+3\fR.
+defined as \fIe**z\fR.
 .SH "RETURN VALUE"
 These functions shall return the complex exponential value of
 .IR z .
diff --git a/man-pages-posix-2017/man3p/cpow.3p b/man-pages-posix-2017/man3p/cpow.3p
index bb53e62..e0d673d 100644
--- a/man-pages-posix-2017/man3p/cpow.3p
+++ b/man-pages-posix-2017/man3p/cpow.3p
@@ -28,7 +28,7 @@ ISO\ C standard. Any conflict between the requirements described here and the
 ISO\ C standard is unintentional. This volume of POSIX.1\(hy2017 defers to the ISO\ C standard.
 .P
 These functions shall compute the complex power function
-\fIx\s-3\uy\d\s+3\fR, with a branch cut for the first parameter along
+\fIx**y\fR, with a branch cut for the first parameter along
 the negative real axis.
 .SH "RETURN VALUE"
 These functions shall return the complex power function value.
diff --git a/man-pages-posix-2017/man3p/drand48.3p b/man-pages-posix-2017/man3p/drand48.3p
index 7157971..29c58a0 100644
--- a/man-pages-posix-2017/man3p/drand48.3p
+++ b/man-pages-posix-2017/man3p/drand48.3p
@@ -52,14 +52,14 @@ The
 and
 \fInrand48\fR()
 functions shall return non-negative, long integers, uniformly
-distributed over the interval [0,2\u\s-331\s+3\d).
+distributed over the interval [0,2**31).
 .P
 The
 \fImrand48\fR()
 and
 \fIjrand48\fR()
 functions shall return signed long integers uniformly distributed over
-the interval [\-2\u\s-331\s+3\d,2\u\s-331\s+3\d).
+the interval [\-2**31,2**31).
 .P
 The
 \fIsrand48\fR(),
diff --git a/man-pages-posix-2017/man3p/exp2.3p b/man-pages-posix-2017/man3p/exp2.3p
index 23cb8bf..c49f455 100644
--- a/man-pages-posix-2017/man3p/exp2.3p
+++ b/man-pages-posix-2017/man3p/exp2.3p
@@ -39,7 +39,7 @@ is non-zero or \fIfetestexcept\fR(FE_INVALID | FE_DIVBYZERO |
 FE_OVERFLOW | FE_UNDERFLOW) is non-zero, an error has occurred.
 .SH "RETURN VALUE"
 Upon successful completion, these functions shall return
-2\fI\s-3\ux\d\s+3\fR.
+2\fI**x\fR.
 .P
 If the correct value would cause overflow, a range error shall occur
 and
diff --git a/man-pages-posix-2017/man3p/expm1.3p b/man-pages-posix-2017/man3p/expm1.3p
index 8db897e..5fb15c1 100644
--- a/man-pages-posix-2017/man3p/expm1.3p
+++ b/man-pages-posix-2017/man3p/expm1.3p
@@ -26,7 +26,7 @@ The functionality described on this reference page is aligned with the
 ISO\ C standard. Any conflict between the requirements described here and the
 ISO\ C standard is unintentional. This volume of POSIX.1\(hy2017 defers to the ISO\ C standard.
 .P
-These functions shall compute \fIe\u\s-3x\s+3\d\fR\-1.0.
+These functions shall compute \fIe**x\fR\-1.0.
 .P
 An application wishing to check for error situations should set
 .IR errno
@@ -38,7 +38,7 @@ is non-zero or \fIfetestexcept\fR(FE_INVALID | FE_DIVBYZERO |
 FE_OVERFLOW | FE_UNDERFLOW) is non-zero, an error has occurred.
 .SH "RETURN VALUE"
 Upon successful completion, these functions return
-\fIe\s-3\ux\d\s+3\fR\-1.0.
+\fIe**x\fR\-1.0.
 .P
 If the correct value would cause overflow, a range error shall occur
 and
@@ -131,7 +131,7 @@ The
 and
 \fIlog1p\fR()
 functions are useful for financial calculations of
-((1+\fIx\fR)\u\s-3\fIn\fR\s+3\d\-1)/\fIx\fR, namely:
+((1+\fIx\fR)**\fIn\fR\-1)/\fIx\fR, namely:
 .sp
 .RS 4
 .nf
diff --git a/man-pages-posix-2017/man3p/hypot.3p b/man-pages-posix-2017/man3p/hypot.3p
index 095a572..f099eed 100644
--- a/man-pages-posix-2017/man3p/hypot.3p
+++ b/man-pages-posix-2017/man3p/hypot.3p
@@ -27,8 +27,8 @@ ISO\ C standard. Any conflict between the requirements described here and the
 ISO\ C standard is unintentional. This volume of POSIX.1\(hy2017 defers to the ISO\ C standard.
 .P
 These functions shall compute the value of the square root of
-.IR x \s-3\u2\d\s+3+\c
-.IR y \s-3\u2\d\s+3
+.IR x **2+\c
+.IR y **2
 without undue overflow or underflow.
 .P
 An application wishing to check for error situations should set
diff --git a/man-pages-posix-2017/man3p/initstate.3p b/man-pages-posix-2017/man3p/initstate.3p
index dcb3cc0..2683bc5 100644
--- a/man-pages-posix-2017/man3p/initstate.3p
+++ b/man-pages-posix-2017/man3p/initstate.3p
@@ -30,13 +30,13 @@ function shall use a non-linear additive feedback random-number
 generator employing a default state array size of 31
 .BR long
 integers to return successive pseudo-random numbers in the range from 0
-to 2\u\s-331\s+3\d\-1. The period of this random-number generator is
-approximately 16 x (2\s-3\u31\d\s+3\-\fR1). The size of the state
+to 2**31\-1. The period of this random-number generator is
+approximately 16 x (2**31\-\fR1). The size of the state
 array determines the period of the random-number generator. Increasing
 the state array size shall increase the period.
 .P
 With 256 bytes of state information, the period of the random-number
-generator shall be greater than 2\s-3\u69\d\s+3.
+generator shall be greater than 2**69.
 .P
 Like
 \fIrand\fR(),
diff --git a/man-pages-posix-2017/man3p/ldexp.3p b/man-pages-posix-2017/man3p/ldexp.3p
index 86196d9..63b718a 100644
--- a/man-pages-posix-2017/man3p/ldexp.3p
+++ b/man-pages-posix-2017/man3p/ldexp.3p
@@ -27,7 +27,7 @@ ISO\ C standard. Any conflict between the requirements described here and the
 ISO\ C standard is unintentional. This volume of POSIX.1\(hy2017 defers to the ISO\ C standard.
 .P
 These functions shall compute the quantity
-\fIx\fR\ *\ 2\u\s-3\fIexp\fR\s+3\d.
+\fIx\fR\ *\ 2**\fIexp\fR.
 .P
 An application wishing to check for error situations should set
 .IR errno
diff --git a/man-pages-posix-2017/man3p/logb.3p b/man-pages-posix-2017/man3p/logb.3p
index 1f1b4de..09bb1c6 100644
--- a/man-pages-posix-2017/man3p/logb.3p
+++ b/man-pages-posix-2017/man3p/logb.3p
@@ -47,7 +47,7 @@ finite positive
 .RS 4
 .nf
 
-1 <= \fIx\fP * FLT_RADIX\s-3\u-logb(x)\d\s+3 < FLT_RADIX
+1 <= \fIx\fP * FLT_RADIX**(-logb(x)) < FLT_RADIX
 .fi
 .P
 .RE
diff --git a/man-pages-posix-2017/man3p/pow.3p b/man-pages-posix-2017/man3p/pow.3p
index 1e28125..4cbee11 100644
--- a/man-pages-posix-2017/man3p/pow.3p
+++ b/man-pages-posix-2017/man3p/pow.3p
@@ -30,7 +30,7 @@ These functions shall compute the value of
 .IR x
 raised to the power
 .IR y ,
-.IR x\u\s-3y\s+3\d .
+.IR x**y .
 If
 .IR x
 is negative, the application shall ensure that
diff --git a/man-pages-posix-2017/man3p/rand.3p b/man-pages-posix-2017/man3p/rand.3p
index 63c9cdf..889bac0 100644
--- a/man-pages-posix-2017/man3p/rand.3p
+++ b/man-pages-posix-2017/man3p/rand.3p
@@ -35,7 +35,7 @@ The
 function shall compute a sequence of pseudo-random integers in the
 range [0,\c
 {RAND_MAX}]
-with a period of at least 2\u\s-332\s0\d.
+with a period of at least 2**32
 .P
 The
 \fIrand\fR()
diff --git a/man-pages-posix-2017/man3p/remquo.3p b/man-pages-posix-2017/man3p/remquo.3p
index 1a609f1..00f4f23 100644
--- a/man-pages-posix-2017/man3p/remquo.3p
+++ b/man-pages-posix-2017/man3p/remquo.3p
@@ -41,7 +41,7 @@ functions, respectively. In the object pointed to by
 they store a value whose sign is the sign of
 .IR x /\c
 .IR y
-and whose magnitude is congruent modulo 2\fI\s-3\un\d\s+3\fR to the
+and whose magnitude is congruent modulo 2\fI**n\fR to the
 magnitude of the integral quotient of
 .IR x /\c
 .IR y ,
diff --git a/man-pages-posix-2017/man3p/scalbln.3p b/man-pages-posix-2017/man3p/scalbln.3p
index 788ce42..13fa729 100644
--- a/man-pages-posix-2017/man3p/scalbln.3p
+++ b/man-pages-posix-2017/man3p/scalbln.3p
@@ -32,8 +32,8 @@ The functionality described on this reference page is aligned with the
 ISO\ C standard. Any conflict between the requirements described here and the
 ISO\ C standard is unintentional. This volume of POSIX.1\(hy2017 defers to the ISO\ C standard.
 .P
-These functions shall compute \fIx\fR\ *\ FLT_RADIX\fI\s-3\un\d\s+3\fR
-efficiently, not normally by computing FLT_RADIX\fI\s-3\un\d\s+3\fR
+These functions shall compute \fIx\fR\ *\ FLT_RADIX**\fIn\fR
+efficiently, not normally by computing FLT_RADIX**\fIn\fR
 explicitly.
 .P
 An application wishing to check for error situations should set
@@ -46,7 +46,7 @@ is non-zero or \fIfetestexcept\fR(FE_INVALID | FE_DIVBYZERO |
 FE_OVERFLOW | FE_UNDERFLOW) is non-zero, an error has occurred.
 .SH "RETURN VALUE"
 Upon successful completion, these functions shall return
-\fIx\fR\ *\ FLT_RADIX\fI\s-3\un\d\s+3\fR.
+\fIx\fR\ *\ FLT_RADIX**\fIn\fR.
 .P
 If the result would cause overflow, a range error shall occur and these
 functions shall return \(+-HUGE_VAL, \(+-HUGE_VALF, and \(+-HUGE_VALL


-- 
Alejandro Colomar
Linux man-pages comaintainer; https://www.kernel.org/doc/man-pages/
http://www.alejandro-colomar.es/

Re: expm1(3p): Mathematical error in given example

From: Michael Kerrisk (man-pages) <hidden>
Date: 2021-02-14 17:28:48 

Hi Alex,

On 2/14/21 1:23 PM, Alejandro Colomar (man-pages) wrote:
Hi Michael,

On 2/14/21 12:34 PM, Michael Kerrisk (man-pages) wrote:
quoted
On 2/12/21 10:41 AM, Jakub Wilk wrote:
quoted
* Alejandro Colomar [off-list ref], 2021-02-11, 16:49:
quoted
quoted
In the APPLICATION USAGE section of expm1(3p)[1] the given example is wrong:

===8<=== Snip =========================================

[..] calculations of ((1+x)n-1)/x, namely:

          expm1(n * log1p(x))/x

======== Snap ====================================>8===

Actually, both expressions are not equal, rather

expm1(n * log1p(x))/x = ((1+x)**n - 1)/x

(with a fictional ** as power infix-operator) would be.
[...]
quoted
We don't maintain the source of the POSIX manual pages.  You could file 
a bug to the Austin Group.
As Walter noted in another mail, the POSIX sources are correct.

This is a problem with conversion to the man page format, which should 
be reported here, not to the Austin Group.
Indeed, it is a problem in the conversion. Or, more precisely, the
POSIX manual pages are using \u...\d to achieve superscripting
for exponentiation, which of course does not render meaningfully
on a terminal.
I guess this is caused by posix.py, right?  If so, would you mind
patching that so that future POSIX revisions are also fixed?
I don't understand that file so much...
Unfortunately, it's not quite so simple. There was at least one
case (od.1p) where this fix was not correct (i.e., superscripting
was not being used to mean power-of). Plus there was at least one
case where a long line needed to be manually wrapped (cksum.1p).
Plus, sometimes the \u..\d was used in conjunction
with font-size change markup (\s-N...\s+N) that was variously
inside or outside the \u...\d. Plus, sometimes parentheses needed
to be added around the superscript value. All of it is probably
solvable with some (slightly complicated) scripting, but for now
the manual edit just seemed much faster.
quoted
The issue affects 19 pages that I found. I plan
to apply the patch below, which uses the fictional '**' operator
to indicate power-of. Seem okay?
I didn't read all of them, but from the first few, looks good to me.
Thanks for taking a look.

Cheers,

Michael

-- 
Michael Kerrisk
Linux man-pages maintainer; http://www.kernel.org/doc/man-pages/
Linux/UNIX System Programming Training: http://man7.org/training/
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help