# Re: \[PATCH v3 4/5\] clk: twl: add clock driver for TWL6032

- From: Christophe JAILLET \<hidden\>
- Date: 2023-09-12 17:16:04 
- List: linux-input
- Page: https://ratatoskr.run/linux-input/2023/09/2331868
- Thread: https://ratatoskr.run/linux-input/2023/09/2330463/t.md

```text
Le 12/09/2023 à 00:13, Andreas Kemnade a écrit :
> The TWL6032 has some clock outputs which are controlled like
> fixed-voltage regulators, in some drivers for these chips
> found in the wild, just the regulator api is abused for controlling
> them, so simply use something similar to the regulator functions.
> Due to a lack of hardware available for testing, leave out the
> TWL6030-specific part of those functions.
>
> Signed-off-by: Andreas Kemnade <andreas@kemnade.info>
> ---
>   drivers/clk/Kconfig   |   9 ++
>   drivers/clk/Makefile  |   1 +
>   drivers/clk/clk-twl.c | 197 ++++++++++++++++++++++++++++++++++++++++++
>   3 files changed, 207 insertions(+)
>   create mode 100644 drivers/clk/clk-twl.c
>

...

> +static int twl_clks_probe(struct platform_device *pdev)
> +{
> +	struct clk_hw_onecell_data *clk_data;
> +	const struct twl_clks_data *hw_data;
> +
> +	struct twl_clock_info *cinfo;
> +	int ret;
> +	int i;
> +	int count;
> +
> +	hw_data = twl6032_clks;
> +	for (count = 0; hw_data[count].init.name; count++)
> +		;

Nit: does removing the /* sentinel */ and using ARRAY_SIZE(twl_clks_data) would make sense and be simpler?

CJ

> +
> +	clk_data = devm_kzalloc(&pdev->dev,
> +				struct_size(clk_data, hws, count),
> +				GFP_KERNEL);
> +	if (!clk_data)
> +		return -ENOMEM;
> +
> +	clk_data->num = count;
> +	cinfo = devm_kcalloc(&pdev->dev, count, sizeof(*cinfo), GFP_KERNEL);
> +	if (!cinfo)
> +		return -ENOMEM;
> +
> +	for (i = 0; i < count; i++) {
> +		cinfo[i].base = hw_data[i].base;
> +		cinfo[i].dev = &pdev->dev;
> +		cinfo[i].hw.init = &hw_data[i].init;
> +		ret = devm_clk_hw_register(&pdev->dev, &cinfo[i].hw);
> +		if (ret) {
> +			dev_err(&pdev->dev, "Fail to register clock %s, %d\n",
> +				hw_data[i].init.name, ret);
> +			return ret;
> +		}
> +		clk_data->hws[i] = &cinfo[i].hw;
> +	}
> +
> +	ret = devm_of_clk_add_hw_provider(&pdev->dev,
> +					  of_clk_hw_onecell_get, clk_data);
> +	if (ret < 0)
> +		dev_err(&pdev->dev, "Fail to add clock driver, %d\n", ret);
> +
> +	return ret;

Nit: should there be a V4, some prefer return 0 to be more explicit.

> +}

...

```
