# \[PATCH 36/40\] iio: adc: ti\_am335x\_adc: Add the scale information - From: Miquel Raynal \ - Date: 2021-08-25 15:35:07 - List: linux-input - Page: https://ratatoskr.run/linux-input/2021/08/8194247 - Thread: https://ratatoskr.run/linux-iio/2021/08/8194207/t.md ```text Without the scale, the values returned to the user are just a picture of the input voltage against the full scale range of the ADC. We need to provide the actual conversion factor to get milli-Volts values. Signed-off-by: Miquel Raynal --- drivers/iio/adc/ti_am335x_adc.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c index d4619fd6fd54..f644898b47dd 100644 --- a/drivers/iio/adc/ti_am335x_adc.c +++ b/drivers/iio/adc/ti_am335x_adc.c @@ -417,6 +417,7 @@ static int tiadc_channel_init(struct device *dev, struct iio_dev *indio_dev, chan->indexed = 1; chan->channel = adc_dev->channel_line[i]; chan->info_mask_separate = BIT(IIO_CHAN_INFO_RAW); + chan->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE); chan->datasheet_name = chan_name_ain[chan->channel]; chan->scan_index = i; chan->scan_type.sign = 'u'; @@ -441,6 +442,23 @@ static int tiadc_read_raw(struct iio_dev *indio_dev, unsigned long timeout; int ret; + switch (mask) { + case IIO_CHAN_INFO_RAW: + break; + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_VOLTAGE: + *val = 1800; + *val2 = chan->scan_type.realbits; + return IIO_VAL_FRACTIONAL_LOG2; + default: + return -EINVAL; + } + break; + default: + return -EINVAL; + } + if (iio_buffer_enabled(indio_dev)) return -EBUSY; -- 2.27.0 ```