# Re: \[PATCH v2\] HID: intel\_ish-hid: HBM: Use connected standby state bit during suspend/resume

- From: Srinivas Pandruvada \<srinivas.pandruvada@linux.intel.com\>
- Date: 2021-05-17 11:27:16 
- List: linux-input
- Page: https://ratatoskr.run/linux-input/2021/05/1379512
- Thread: https://ratatoskr.run/linux-input/2021/03/6303801/t.md

```text
Hi Jiri,

On Fri, 2021-03-19 at 14:35 +0100, Jiri Kosina wrote:
> On Tue, 16 Mar 2021, Srinivas Pandruvada wrote:
> 
> > From: Ye Xiang <redacted>
> > 
> > The individual sensor drivers implemented in the ISH firmware needs
> > capability to take special actions when there is a change in the
> > system
> > standby state. The ISH core firmware passes this notification to
> > individual sensor drivers in response to the OS request via
> > connected
> > standby bit in the SYSTEM_STATE_STATUS command.
> > 
> > This change sets CONNECTED_STANDBY_STATE_BIT bit to 1 during
> > suspend
> > callback and clears during resume callback.
> > 
> > Signed-off-by: Ye Xiang <redacted>
> > [srinivas.pandruvada@linux.intel.com: changelog rewrite]
> > Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
> > ---
> > v2:
> >         changed changelog to be more clear
> >         Changed the name in the signed-off to match "From"
> > 
> >  drivers/hid/intel-ish-hid/ishtp/hbm.c | 6 +++---
> >  drivers/hid/intel-ish-hid/ishtp/hbm.h | 1 +
> >  2 files changed, 4 insertions(+), 3 deletions(-)
> 
> Applied, thanks.

I was looking for this patch in 5.13-rc2. It is not there, Is there
some pull request pending?

Thanks,
Srinivas 


> 


```