[PATCH v7 1/2] mfd: google,cros-ec: add DT bindings for a baseboard's switch device

This is for ChromeOS tablets which have a 'cros_cbas' switch device
in the "Whiskers" base board. This device can be instantiated only by
device tree on ARM platforms. ChromeOS EC doesn't provide a way to
probe the device.

Signed-off-by: Ikjoon Jang <redacted>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Enric Balletbo i Serra <redacted>

---

Changes in v7:
 - no changes from v6

Changes in v6:
 - Remove a label for cbas node in a example

Changes in v5:
 - Add missing blank lines and change the description property's position.
 - Add a note to description: "this device cannot be detected at runtime."

Changes in v4:
 - Define cros-cbase bindings inside google,cros-ec.yaml instead of
   a separated binding document.

 .../bindings/mfd/google,cros-ec.yaml          | 20 +++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index 76bf16ee27ec..929c17552d8b 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml

@@ -114,6 +114,22 @@ properties:
       - "#address-cells"
       - "#size-cells"
 
+  cbas:
+    type: object
+
+    description:
+      This device is used to signal when a detachable base is attached
+      to a Chrome OS tablet. This device cannot be detected at runtime.
+
+    properties:
+      compatible:
+        const: google,cros-cbas
+
+    required:
+      - compatible
+
+    additionalProperties: false
+
 patternProperties:
   "^i2c-tunnel[0-9]*$":
     type: object

@@ -180,6 +196,10 @@ examples:
             interrupts = <99 0>;
             interrupt-parent = <&gpio7>;
             spi-max-frequency = <5000000>;
+
+            cbas {
+                compatible = "google,cros-cbas";
+            };
         };
     };
 

-- 
2.31.1.751.gd2f1c929bd-goog

Add a 'cbas' device node for supporting tablet mode switch in
kukui devices.

Kukui platforms with detacheable base have an additional input
device under cros-ec, which reports SW_TABLET_MODE regarding
its base state (e.g. base flipped or detached).

Signed-off-by: Ikjoon Jang <redacted>

---

Changes in v7:
- remove a label from cbas node
- fix an erratum in commit message (table --> tablet)
- dt-binding patchess merged altogether with mt8183 dts

 arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index ff56bcfa3370..1512605a438e 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi

@@ -816,6 +816,10 @@ usbc_extcon: extcon0 {
 			compatible = "google,extcon-usbc-cros-ec";
 			google,usb-port-id = <0>;
 		};
+
+		cbas {
+			compatible = "google,cros-cbas";
+		};
 	};
 };
 

-- 
2.31.1.751.gd2f1c929bd-goog