# RE: \[PATCH v3 2/2\] input: touchscreen: Add support for ILITEK Lego Series

- From: Joe Hung (洪銘陽) \<hidden\>
- Date: 2021-03-02 19:59:11 
- List: linux-input
- Page: https://ratatoskr.run/linux-input/2021/03/8189050
- Thread: https://ratatoskr.run/linux-devicetree/2021/02/8188916/t.md

```text
Hi Dmitry,

Thank you for the quick response.
Would update Kconfig also in v4.

On Sun, Feb 28, 2021 at 21:25:13PM -0800, Dmitry Torokhov wrote:
> Hi Joe,
> 
> On Fri, Feb 26, 2021 at 08:30:25AM +0000, Joe Hung (洪銘陽) wrote:
> > Hello Dmitry,
> > 
> > Thank you for the quick response.
> > Understand and agreed on all your comments.
> > 
> > Little question about the name of prefix and this driver file,
> > could it be named according to different protocol version named by ILITEK internally
> > as ilitek_p6x.c (as protocol version 6 for Lego series, and ili210x.c should be protocol 2).
> > 
> > In addition, could we named it like how touchscreen/elants_i2c.c and eftf2127.c worked?
> 
> So elants_i2c vs eftf2127 is historical artefact with elants_i2c being
> there first.
> 
> > Is there a way that we could keep ilitek as prefix and driver file's name?
> 
> OK, this is really a minor point as far as I am concerned and we spent
> way too much time debating it. You may keep ilitek file name and prefix
> if you would prefer. Just make sure you list supported
> controllers/protocols in Kconfig and that should be enough.

Agreed; thank you very much.

> 
> Thanks.
> 
> -- 
> Dmitry

Thank you very much.

--
Joe Hung
```