# Re: \[PATCH\] dt-bindings: input: atmel\_mxt\_ts: convert atmel,maxtouch.txt to yaml

- From: Dafna Hirschfeld \<hidden\>
- Date: 2020-03-20 15:21:56 
- List: linux-input
- Page: https://ratatoskr.run/linux-input/2020/03/5902120
- Thread: https://ratatoskr.run/linux-devicetree/2020/03/5882982/t.md

```text


On 11.03.20 16:48, Rob Herring wrote:
> On Wed, Mar 11, 2020 at 10:23 AM Dafna Hirschfeld
> [ref] wrote:
>>
>> Hi,
>> Thanks for the review
>>
>> On 10.03.20 22:14, Rob Herring wrote:
>>> On Tue, Mar 03, 2020 at 07:25:33PM +0200, Dafna Hirschfeld wrote:
>>>> Convert the binding file atmel,maxtouch.txt to yaml format.
>>>> Also change the file name in the MAINTAINERS file.
>>>>
>>>> This was tested and verified on ARM and ARM64 with:
>>>>
>>>> make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
>>>> make dtbs_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
>>>>
>>>> Signed-off-by: Dafna Hirschfeld <redacted>
>>>> ---
>>>>    .../bindings/input/atmel,maxtouch.txt         | 41 ------------
>>>>    .../bindings/input/atmel,maxtouch.yaml        | 64 +++++++++++++++++++
>>>>    MAINTAINERS                                   |  2 +-
>>>>    3 files changed, 65 insertions(+), 42 deletions(-)
>>>>    delete mode 100644 Documentation/devicetree/bindings/input/atmel,maxtouch.txt
>>>>    create mode 100644 Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
>>>>
>>>> diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
>>>> deleted file mode 100644
>>>> index c88919480d37..000000000000
>>>> --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt
>>>> +++ /dev/null
>>>> @@ -1,41 +0,0 @@
>>>> -Atmel maXTouch touchscreen/touchpad
>>>> -
>>>> -Required properties:
>>>> -- compatible:
>>>> -    atmel,maxtouch
>>>> -
>>>> -    The following compatibles have been used in various products but are
>>>> -    deprecated:
>>>> -    atmel,qt602240_ts
>>>> -    atmel,atmel_mxt_ts
>>>> -    atmel,atmel_mxt_tp
>>>> -    atmel,mXT224
>>>> -
>>>> -- reg: The I2C address of the device
>>>> -
>>>> -- interrupts: The sink for the touchpad's IRQ output
>>>> -    See ../interrupt-controller/interrupts.txt
>>>> -
>>>> -Optional properties for main touchpad device:
>>>> -
>>>> -- linux,gpio-keymap: When enabled, the SPT_GPIOPWN_T19 object sends messages
>>>> -    on GPIO bit changes. An array of up to 8 entries can be provided
>>>> -    indicating the Linux keycode mapped to each bit of the status byte,
>>>> -    starting at the LSB. Linux keycodes are defined in
>>>> -    <dt-bindings/input/input.h>.
>>>> -
>>>> -    Note: the numbering of the GPIOs and the bit they start at varies between
>>>> -    maXTouch devices. You must either refer to the documentation, or
>>>> -    experiment to determine which bit corresponds to which input. Use
>>>> -    KEY_RESERVED for unused padding values.
>>>> -
>>>> -- reset-gpios: GPIO specifier for the touchscreen's reset pin (active low)
>>>> -
>>>> -Example:
>>>> -
>>>> -    touch@4b {
>>>> -            compatible = "atmel,maxtouch";
>>>> -            reg = <0x4b>;
>>>> -            interrupt-parent = <&gpio>;
>>>> -            interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_LEVEL_LOW>;
>>>> -    };
>>>> diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
>>>> new file mode 100644
>>>> index 000000000000..024dc4ded4f3
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
>>>> @@ -0,0 +1,64 @@
>>>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>>>> +%YAML 1.2
>>>> +---
>>>> +$id: http://devicetree.org/schemas/input/atmel,maxtouch.yaml#
>>>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>>>> +
>>>> +title: Atmel maXTouch touchscreen/touchpad
>>>> +
>>>> +maintainers:
>>>> +  - Nick Dyer [ref]
>>>> +
>>>> +description: |
>>>> +  Atmel maXTouch touchscreen/touchpad
>>>> +
>>>> +properties:
>>>> +  compatible:
>>>> +    const: atmel,maxtouch
>>>> +
>>>> +  reg:
>>>> +    description: The I2C address of the device
>>>> +    maxItems: 1
>>>> +
>>>> +  interrupts:
>>>> +    description: The sink for the touchpad's IRQ output
>>>
>>> How many? Needs 'maxItems: 1'>
>>> You can drop the description.
>>>
>>>> +
>>>> +  linux,gpio-keymap:
>>>> +    description:
>>>> +      When enabled, the SPT_GPIOPWN_T19 object sends messages
>>>> +      on GPIO bit changes. An array of up to 8 entries can be provided
>>>> +      indicating the Linux keycode mapped to each bit of the status byte,
>>>> +      starting at the LSB. Linux keycodes are defined in
>>>> +      <dt-bindings/input/input.h>.
>>>> +      Note, the numbering of the GPIOs and the bit they start at varies between
>>>> +      maXTouch devices. You must either refer to the documentation, or
>>>> +      experiment to determine which bit corresponds to which input. Use
>>>> +      KEY_RESERVED for unused padding values.
>>>> +    $ref: /schemas/types.yaml#/definitions/uint32-array
>>>> +    maxItems: 8
>>>> +
>>>> +  reset-gpios:
>>>> +    description: GPIO specifier for the touchscreen's reset pin (active low)
>>>> +    maxItems: 1
>>>> +
>>>> +required:
>>>> +  - compatible
>>>> +  - reg
>>>> +  - interrupts
>>>> +
>>>> +additionalProperties: true
>>>
>>> That's the default and we generally want this to be 'false'.
>> but many nodes has more properties not described here so I could not
>> set it to false.
>
> Like touchscreen-* properties? Then you should reference
> touchscreen.yaml. And add 'unevaluatedProperties: false' here. That
> doesn't yet do anything, but will when the tools support the lastest
> json-schema release.

Hi, no it is other properties, these are the warnings:
arch/arm/boot/dts/s5pv210-goni.dt.yaml: tsp@4a: 'atmel,burst-length', 'atmel,orientation', 'atmel,threshold', 'atmel,x-line', 'atmel,x-size', 'atmel,y-line', 'atmel,y-size', 'vdd-supply' do not match any of the regexes: 'pinctrl-[0-9]+'

arch/arm/boot/dts/omap4-droid4-xt894.dt.yaml: touchscreen@4a: 'interrupt-names', 'wakeup-source' do not match any of the regexes: 'pinctrl-[0-9]+'

arch/arm/boot/dts/exynos5800-peach-pi.dt.yaml: trackpad@4b: 'wakeup-source' does not match any of the regexes: 'pinctrl-[0-9]+'

Dafna

>
> Rob
>
```