---
Changes v2 -> v3 (suggested by Bastien):
- fix commit description
Changes v1 -> v2:
- rebased on patches 1 and 2 in series
- added description of test board in changelog (suggested by
Bastien)
drivers/input/touchscreen/goodix.c | 93 ++++++++++++++------------
------------
1 file changed, 33 insertions(+), 60 deletions(-)
diff --git a/drivers/input/touchscreen/goodix.c
b/drivers/input/touchscreen/goodix.c
index dc832890f6d3..f82101cd9c04 100644
--- a/drivers/input/touchscreen/goodix.c
+++ b/drivers/input/touchscreen/goodix.c
@@ -22,6 +22,7 @@
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/irq.h>
@@ -43,11 +44,7 @@ struct goodix_ts_data {
struct i2c_client *client;
struct input_dev *input_dev;
const struct goodix_chip_data *chip;
- int abs_x_max;
- int abs_y_max;
- bool swapped_x_y;
- bool inverted_x;
- bool inverted_y;
+ struct touchscreen_properties prop;
unsigned int max_touch_num;
unsigned int int_trigger_type;
struct gpio_desc *gpiod_int;@@ -295,24 +292,10 @@ static void goodix_ts_report_touch(struct
goodix_ts_data *ts, u8 *coor_data)
int input_y = get_unaligned_le16(&coor_data[3]);
int input_w = get_unaligned_le16(&coor_data[5]);
- /* Inversions have to happen before axis swapping */
- if (!ts->swapped_x_y) {
- if (ts->inverted_x)
- input_x = ts->abs_x_max - input_x;
- if (ts->inverted_y)
- input_y = ts->abs_y_max - input_y;
- } else {
- if (ts->inverted_x)
- input_x = ts->abs_y_max - input_x;
- if (ts->inverted_y)
- input_y = ts->abs_x_max - input_y;
- swap(input_x, input_y);
- }
-
input_mt_slot(ts->input_dev, id);
input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER,
true);
- input_report_abs(ts->input_dev, ABS_MT_POSITION_X, input_x);
- input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, input_y);
+ touchscreen_report_pos(ts->input_dev, &ts->prop, input_x,
input_y,
+ true);
input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR,
input_w);
input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR,
input_w);
}@@ -585,6 +568,7 @@ static int goodix_get_gpio_config(struct
goodix_ts_data *ts)
static void goodix_read_config(struct goodix_ts_data *ts)
{
u8 config[GOODIX_CONFIG_MAX_LENGTH];
+ int x_max, y_max;
int error;
error = goodix_i2c_read(ts->client, ts->chip->config_addr,@@ -593,37 +577,34 @@ static void goodix_read_config(struct
goodix_ts_data *ts)
dev_warn(&ts->client->dev,
"Error reading config (%d), using
defaults\n",
error);
- ts->abs_x_max = GOODIX_MAX_WIDTH - 1;
- ts->abs_y_max = GOODIX_MAX_HEIGHT - 1;
- if (ts->swapped_x_y)
- swap(ts->abs_x_max, ts->abs_y_max);
+ x_max = GOODIX_MAX_WIDTH;
+ y_max = GOODIX_MAX_HEIGHT;
ts->int_trigger_type = GOODIX_INT_TRIGGER;
ts->max_touch_num = GOODIX_MAX_CONTACTS;
- return;
+ goto input_set_params;
}
- ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC])
- 1;
- ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC +
2]) - 1;
- if (ts->swapped_x_y)
- swap(ts->abs_x_max, ts->abs_y_max);
+ x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
+ y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
- if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num)
{
+ if (!x_max || !y_max || !ts->max_touch_num) {
dev_err(&ts->client->dev,
"Invalid config, using defaults\n");
- ts->abs_x_max = GOODIX_MAX_WIDTH - 1;
- ts->abs_y_max = GOODIX_MAX_HEIGHT - 1;
- if (ts->swapped_x_y)
- swap(ts->abs_x_max, ts->abs_y_max);
+ x_max = GOODIX_MAX_WIDTH;
+ y_max = GOODIX_MAX_HEIGHT;
ts->max_touch_num = GOODIX_MAX_CONTACTS;
}
- if (dmi_check_system(rotated_screen)) {
- ts->inverted_x = true;
- ts->inverted_y = true;
- dev_dbg(&ts->client->dev,
- "Applying '180 degrees rotated screen'
quirk\n");
- }
+input_set_params:
+ input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X,
+ 0, x_max - 1, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y,
+ 0, y_max - 1, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0,
255, 0, 0);
+ input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0,
255, 0, 0);
+ input_mt_init_slots(ts->input_dev, ts->max_touch_num,
+ INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
}
/**@@ -698,16 +679,6 @@ static int goodix_request_input_dev(struct
goodix_ts_data *ts)
return -ENOMEM;
}
- input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X,
- 0, ts->abs_x_max, 0, 0);
- input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y,
- 0, ts->abs_y_max, 0, 0);
- input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0,
255, 0, 0);
- input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0,
255, 0, 0);
-
- input_mt_init_slots(ts->input_dev, ts->max_touch_num,
- INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
-
ts->input_dev->name = "Goodix Capacitive TouchScreen";
ts->input_dev->phys = "input/ts";
ts->input_dev->id.bustype = BUS_I2C;
@@ -742,19 +713,21 @@ static int goodix_configure_dev(struct
goodix_ts_data *ts)
{
int error;
- ts->swapped_x_y = device_property_read_bool(&ts->client-quoted
dev,
- "touchscreen-
swapped-x-y");
- ts->inverted_x = device_property_read_bool(&ts->client->dev,
- "touchscreen-
inverted-x");
- ts->inverted_y = device_property_read_bool(&ts->client->dev,
- "touchscreen-
inverted-y");
-
- goodix_read_config(ts);
-
error = goodix_request_input_dev(ts);
if (error)
return error;
+ goodix_read_config(ts);
+
+ touchscreen_parse_properties(ts->input_dev, true, &ts-
quoted
prop);
+
+ if (dmi_check_system(rotated_screen)) {
+ ts->prop.invert_x = true;
+ ts->prop.invert_y = true;
+ dev_dbg(&ts->client->dev,
+ "Applying '180 degrees rotated screen'
quirk\n");
+ }
+
ts->irq_flags = goodix_irq_flags[ts->int_trigger_type] |
IRQF_ONESHOT;
error = goodix_request_irq(ts);
if (error) {