[RESEND PATCH V7 5/7] regulator: da9061: BUCK and LDO regulator driver
From: Steve Twiss <hidden>
Date: 2017-05-23 13:55:54
From: Steve Twiss <redacted> Regulator support for the DA9061 is added into the DA9062 regulator driver. The regulators for DA9061 differ from those of DA9062. A new DA9061 enumeration list for the LDOs and Bucks supported by this device is added. Regulator information added: the old regulator information for DA9062 is renamed from local_regulator_info[] to local_da9062_regulator_info[] and a new array is added to support local_da9061_regulator_info[]. The probe() function switches on the da9062_compatible_types enumeration and configures the correct da9062_regulator_info array and number of regulator entries. Kconfig is updated to reflect support for DA9061 and DA9062 regulators. Acked-by: Mark Brown <redacted> Signed-off-by: Steve Twiss <redacted> --- Hi, This patch was Acked by Mark Brown, a long time ago, way back in Oct 2016 (https://patchwork.kernel.org/patch/9397787/). I have kept Mark Brown's Ack attached because there have been no real code changes since then, but I have recently updated the copyright header slightly, rebased the code (no changes necessary) and compile tested it against x86_64. The MFD files which this patch depended on were accepted into linux-next by Lee Jones last week. If there is anything in the way of this patch acceptance, could you please let me know? Regards, Steve This patch applies against linux-next and v4.12-rc2 v6 -> v7 - NO CODE CHANGE - Compile tested ARCH=x86_64 v5 -> v6 - Rebased from v4.9 to v4.11-rc3 - Modify Copyright to match Dialog latest legal statement v4 -> v5 - Rebased from v4.8 to v4.9 - NO CODE CHANGE v3 -> v4 - NO CODE CHANGE - Patch renamed from [PATCH V3 6/9] to [PATCH V4 5/8] v2 -> v3 - NO CODE CHANGE - Patch renamed from [PATCH V2 06/10] to [PATCH V3 6/9] - Added Ack from Mark Brown v1 -> v2 - Patch renamed from [PATCH V1 02/10] to [PATCH V2 06/10] -- these changes were made to fix checkpatch warnings caused by the patch set dependency order - Updated header to use DA9061 and DA9062 Hi, I have updated copyright header slightly to match Dialog's legal expectation, but there are no code changes for this version PATCH V7. As previously: These changes depend on a header file provided as part of an earlier patch [V7,4/7] mfd: da9061: MFD core support from this set. The regulator probe() switches on the chip_type which uses enum da9062_compatible_types in core.h from this patch. Regards, Steve Twiss, Dialog Semiconductor drivers/regulator/Kconfig | 4 +- drivers/regulator/da9062-regulator.c | 303 +++++++++++++++++++++++++++++++++-- 2 files changed, 293 insertions(+), 14 deletions(-)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 48db87d..9d2222e 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig@@ -214,11 +214,11 @@ config REGULATOR_DA9055 will be called da9055-regulator. config REGULATOR_DA9062 - tristate "Dialog Semiconductor DA9062 regulators" + tristate "Dialog Semiconductor DA9061/62 regulators" depends on MFD_DA9062 help Say y here to support the BUCKs and LDOs regulators found on - DA9062 PMICs. + DA9061 and DA9062 PMICs. This driver can also be built as a module. If so, the module will be called da9062-regulator.
diff --git a/drivers/regulator/da9062-regulator.c b/drivers/regulator/da9062-regulator.c
index 0638c8b..34a70d9 100644
--- a/drivers/regulator/da9062-regulator.c
+++ b/drivers/regulator/da9062-regulator.c@@ -1,6 +1,6 @@ /* - * da9062-regulator.c - REGULATOR device driver for DA9062 - * Copyright (C) 2015 Dialog Semiconductor Ltd. + * Regulator device driver for DA9061 and DA9062. + * Copyright (C) 2015-2017 Dialog Semiconductor * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License
@@ -28,6 +28,17 @@ /* Regulator IDs */ enum { + DA9061_ID_BUCK1, + DA9061_ID_BUCK2, + DA9061_ID_BUCK3, + DA9061_ID_LDO1, + DA9061_ID_LDO2, + DA9061_ID_LDO3, + DA9061_ID_LDO4, + DA9061_MAX_REGULATORS, +}; + +enum { DA9062_ID_BUCK1, DA9062_ID_BUCK2, DA9062_ID_BUCK3,
@@ -88,15 +99,21 @@ enum { /* Regulator operations */ -/* Current limits array (in uA) BUCK1 and BUCK3. - Entry indexes corresponds to register values. */ +/* Current limits array (in uA) + * - DA9061_ID_[BUCK1|BUCK3] + * - DA9062_ID_[BUCK1|BUCK2|BUCK4] + * Entry indexes corresponds to register values. + */ static const int da9062_buck_a_limits[] = { 500000, 600000, 700000, 800000, 900000, 1000000, 1100000, 1200000, 1300000, 1400000, 1500000, 1600000, 1700000, 1800000, 1900000, 2000000 }; -/* Current limits array (in uA) for BUCK2. - Entry indexes corresponds to register values. */ +/* Current limits array (in uA) + * - DA9061_ID_BUCK2 + * - DA9062_ID_BUCK3 + * Entry indexes corresponds to register values. + */ static const int da9062_buck_b_limits[] = { 1500000, 1600000, 1700000, 1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000, 2600000, 2700000, 2800000, 2900000, 3000000
@@ -405,8 +422,254 @@ static int da9062_ldo_set_suspend_mode(struct regulator_dev *rdev, .set_suspend_mode = da9062_ldo_set_suspend_mode, }; -/* Regulator information */ -static const struct da9062_regulator_info local_regulator_info[] = { +/* DA9061 Regulator information */ +static const struct da9062_regulator_info local_da9061_regulator_info[] = { + { + .desc.id = DA9061_ID_BUCK1, + .desc.name = "DA9061 BUCK1", + .desc.of_match = of_match_ptr("buck1"), + .desc.regulators_node = of_match_ptr("regulators"), + .desc.ops = &da9062_buck_ops, + .desc.min_uV = (300) * 1000, + .desc.uV_step = (10) * 1000, + .desc.n_voltages = ((1570) - (300))/(10) + 1, + .current_limits = da9062_buck_a_limits, + .n_current_limits = ARRAY_SIZE(da9062_buck_a_limits), + .desc.enable_reg = DA9062AA_BUCK1_CONT, + .desc.enable_mask = DA9062AA_BUCK1_EN_MASK, + .desc.vsel_reg = DA9062AA_VBUCK1_A, + .desc.vsel_mask = DA9062AA_VBUCK1_A_MASK, + .desc.linear_min_sel = 0, + .sleep = REG_FIELD(DA9062AA_VBUCK1_A, + __builtin_ffs((int)DA9062AA_BUCK1_SL_A_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_BUCK1_SL_A_MASK)) - 1), + .suspend_sleep = REG_FIELD(DA9062AA_VBUCK1_B, + __builtin_ffs((int)DA9062AA_BUCK1_SL_B_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_BUCK1_SL_B_MASK)) - 1), + .suspend_vsel_reg = DA9062AA_VBUCK1_B, + .mode = REG_FIELD(DA9062AA_BUCK1_CFG, + __builtin_ffs((int)DA9062AA_BUCK1_MODE_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_BUCK1_MODE_MASK)) - 1), + .suspend = REG_FIELD(DA9062AA_DVC_1, + __builtin_ffs((int)DA9062AA_VBUCK1_SEL_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_VBUCK1_SEL_MASK)) - 1), + .ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_C, + __builtin_ffs((int)DA9062AA_BUCK1_ILIM_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_BUCK1_ILIM_MASK)) - 1), + }, + { + .desc.id = DA9061_ID_BUCK2, + .desc.name = "DA9061 BUCK2", + .desc.of_match = of_match_ptr("buck2"), + .desc.regulators_node = of_match_ptr("regulators"), + .desc.ops = &da9062_buck_ops, + .desc.min_uV = (800) * 1000, + .desc.uV_step = (20) * 1000, + .desc.n_voltages = ((3340) - (800))/(20) + 1, + .current_limits = da9062_buck_b_limits, + .n_current_limits = ARRAY_SIZE(da9062_buck_b_limits), + .desc.enable_reg = DA9062AA_BUCK3_CONT, + .desc.enable_mask = DA9062AA_BUCK3_EN_MASK, + .desc.vsel_reg = DA9062AA_VBUCK3_A, + .desc.vsel_mask = DA9062AA_VBUCK3_A_MASK, + .desc.linear_min_sel = 0, + .sleep = REG_FIELD(DA9062AA_VBUCK3_A, + __builtin_ffs((int)DA9062AA_BUCK3_SL_A_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_BUCK3_SL_A_MASK)) - 1), + .suspend_sleep = REG_FIELD(DA9062AA_VBUCK3_B, + __builtin_ffs((int)DA9062AA_BUCK3_SL_B_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_BUCK3_SL_B_MASK)) - 1), + .suspend_vsel_reg = DA9062AA_VBUCK3_B, + .mode = REG_FIELD(DA9062AA_BUCK3_CFG, + __builtin_ffs((int)DA9062AA_BUCK3_MODE_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_BUCK3_MODE_MASK)) - 1), + .suspend = REG_FIELD(DA9062AA_DVC_1, + __builtin_ffs((int)DA9062AA_VBUCK3_SEL_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_VBUCK3_SEL_MASK)) - 1), + .ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_A, + __builtin_ffs((int)DA9062AA_BUCK3_ILIM_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_BUCK3_ILIM_MASK)) - 1), + }, + { + .desc.id = DA9061_ID_BUCK3, + .desc.name = "DA9061 BUCK3", + .desc.of_match = of_match_ptr("buck3"), + .desc.regulators_node = of_match_ptr("regulators"), + .desc.ops = &da9062_buck_ops, + .desc.min_uV = (530) * 1000, + .desc.uV_step = (10) * 1000, + .desc.n_voltages = ((1800) - (530))/(10) + 1, + .current_limits = da9062_buck_a_limits, + .n_current_limits = ARRAY_SIZE(da9062_buck_a_limits), + .desc.enable_reg = DA9062AA_BUCK4_CONT, + .desc.enable_mask = DA9062AA_BUCK4_EN_MASK, + .desc.vsel_reg = DA9062AA_VBUCK4_A, + .desc.vsel_mask = DA9062AA_VBUCK4_A_MASK, + .desc.linear_min_sel = 0, + .sleep = REG_FIELD(DA9062AA_VBUCK4_A, + __builtin_ffs((int)DA9062AA_BUCK4_SL_A_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_BUCK4_SL_A_MASK)) - 1), + .suspend_sleep = REG_FIELD(DA9062AA_VBUCK4_B, + __builtin_ffs((int)DA9062AA_BUCK4_SL_B_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_BUCK4_SL_B_MASK)) - 1), + .suspend_vsel_reg = DA9062AA_VBUCK4_B, + .mode = REG_FIELD(DA9062AA_BUCK4_CFG, + __builtin_ffs((int)DA9062AA_BUCK4_MODE_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_BUCK4_MODE_MASK)) - 1), + .suspend = REG_FIELD(DA9062AA_DVC_1, + __builtin_ffs((int)DA9062AA_VBUCK4_SEL_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_VBUCK4_SEL_MASK)) - 1), + .ilimit = REG_FIELD(DA9062AA_BUCK_ILIM_B, + __builtin_ffs((int)DA9062AA_BUCK4_ILIM_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_BUCK4_ILIM_MASK)) - 1), + }, + { + .desc.id = DA9061_ID_LDO1, + .desc.name = "DA9061 LDO1", + .desc.of_match = of_match_ptr("ldo1"), + .desc.regulators_node = of_match_ptr("regulators"), + .desc.ops = &da9062_ldo_ops, + .desc.min_uV = (900) * 1000, + .desc.uV_step = (50) * 1000, + .desc.n_voltages = ((3600) - (900))/(50) + 1, + .desc.enable_reg = DA9062AA_LDO1_CONT, + .desc.enable_mask = DA9062AA_LDO1_EN_MASK, + .desc.vsel_reg = DA9062AA_VLDO1_A, + .desc.vsel_mask = DA9062AA_VLDO1_A_MASK, + .desc.linear_min_sel = 0, + .sleep = REG_FIELD(DA9062AA_VLDO1_A, + __builtin_ffs((int)DA9062AA_LDO1_SL_A_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_LDO1_SL_A_MASK)) - 1), + .suspend_sleep = REG_FIELD(DA9062AA_VLDO1_B, + __builtin_ffs((int)DA9062AA_LDO1_SL_B_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_LDO1_SL_B_MASK)) - 1), + .suspend_vsel_reg = DA9062AA_VLDO1_B, + .suspend = REG_FIELD(DA9062AA_DVC_1, + __builtin_ffs((int)DA9062AA_VLDO1_SEL_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_VLDO1_SEL_MASK)) - 1), + .oc_event = REG_FIELD(DA9062AA_STATUS_D, + __builtin_ffs((int)DA9062AA_LDO1_ILIM_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_LDO1_ILIM_MASK)) - 1), + }, + { + .desc.id = DA9061_ID_LDO2, + .desc.name = "DA9061 LDO2", + .desc.of_match = of_match_ptr("ldo2"), + .desc.regulators_node = of_match_ptr("regulators"), + .desc.ops = &da9062_ldo_ops, + .desc.min_uV = (900) * 1000, + .desc.uV_step = (50) * 1000, + .desc.n_voltages = ((3600) - (600))/(50) + 1, + .desc.enable_reg = DA9062AA_LDO2_CONT, + .desc.enable_mask = DA9062AA_LDO2_EN_MASK, + .desc.vsel_reg = DA9062AA_VLDO2_A, + .desc.vsel_mask = DA9062AA_VLDO2_A_MASK, + .desc.linear_min_sel = 0, + .sleep = REG_FIELD(DA9062AA_VLDO2_A, + __builtin_ffs((int)DA9062AA_LDO2_SL_A_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_LDO2_SL_A_MASK)) - 1), + .suspend_sleep = REG_FIELD(DA9062AA_VLDO2_B, + __builtin_ffs((int)DA9062AA_LDO2_SL_B_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_LDO2_SL_B_MASK)) - 1), + .suspend_vsel_reg = DA9062AA_VLDO2_B, + .suspend = REG_FIELD(DA9062AA_DVC_1, + __builtin_ffs((int)DA9062AA_VLDO2_SEL_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_VLDO2_SEL_MASK)) - 1), + .oc_event = REG_FIELD(DA9062AA_STATUS_D, + __builtin_ffs((int)DA9062AA_LDO2_ILIM_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_LDO2_ILIM_MASK)) - 1), + }, + { + .desc.id = DA9061_ID_LDO3, + .desc.name = "DA9061 LDO3", + .desc.of_match = of_match_ptr("ldo3"), + .desc.regulators_node = of_match_ptr("regulators"), + .desc.ops = &da9062_ldo_ops, + .desc.min_uV = (900) * 1000, + .desc.uV_step = (50) * 1000, + .desc.n_voltages = ((3600) - (900))/(50) + 1, + .desc.enable_reg = DA9062AA_LDO3_CONT, + .desc.enable_mask = DA9062AA_LDO3_EN_MASK, + .desc.vsel_reg = DA9062AA_VLDO3_A, + .desc.vsel_mask = DA9062AA_VLDO3_A_MASK, + .desc.linear_min_sel = 0, + .sleep = REG_FIELD(DA9062AA_VLDO3_A, + __builtin_ffs((int)DA9062AA_LDO3_SL_A_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_LDO3_SL_A_MASK)) - 1), + .suspend_sleep = REG_FIELD(DA9062AA_VLDO3_B, + __builtin_ffs((int)DA9062AA_LDO3_SL_B_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_LDO3_SL_B_MASK)) - 1), + .suspend_vsel_reg = DA9062AA_VLDO3_B, + .suspend = REG_FIELD(DA9062AA_DVC_1, + __builtin_ffs((int)DA9062AA_VLDO3_SEL_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_VLDO3_SEL_MASK)) - 1), + .oc_event = REG_FIELD(DA9062AA_STATUS_D, + __builtin_ffs((int)DA9062AA_LDO3_ILIM_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_LDO3_ILIM_MASK)) - 1), + }, + { + .desc.id = DA9061_ID_LDO4, + .desc.name = "DA9061 LDO4", + .desc.of_match = of_match_ptr("ldo4"), + .desc.regulators_node = of_match_ptr("regulators"), + .desc.ops = &da9062_ldo_ops, + .desc.min_uV = (900) * 1000, + .desc.uV_step = (50) * 1000, + .desc.n_voltages = ((3600) - (900))/(50) + 1, + .desc.enable_reg = DA9062AA_LDO4_CONT, + .desc.enable_mask = DA9062AA_LDO4_EN_MASK, + .desc.vsel_reg = DA9062AA_VLDO4_A, + .desc.vsel_mask = DA9062AA_VLDO4_A_MASK, + .desc.linear_min_sel = 0, + .sleep = REG_FIELD(DA9062AA_VLDO4_A, + __builtin_ffs((int)DA9062AA_LDO4_SL_A_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_LDO4_SL_A_MASK)) - 1), + .suspend_sleep = REG_FIELD(DA9062AA_VLDO4_B, + __builtin_ffs((int)DA9062AA_LDO4_SL_B_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_LDO4_SL_B_MASK)) - 1), + .suspend_vsel_reg = DA9062AA_VLDO4_B, + .suspend = REG_FIELD(DA9062AA_DVC_1, + __builtin_ffs((int)DA9062AA_VLDO4_SEL_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_VLDO4_SEL_MASK)) - 1), + .oc_event = REG_FIELD(DA9062AA_STATUS_D, + __builtin_ffs((int)DA9062AA_LDO4_ILIM_MASK) - 1, + sizeof(unsigned int) * 8 - + __builtin_clz((DA9062AA_LDO4_ILIM_MASK)) - 1), + }, +}; + +/* DA9062 Regulator information */ +static const struct da9062_regulator_info local_da9062_regulator_info[] = { { .desc.id = DA9062_ID_BUCK1, .desc.name = "DA9062 BUCK1",
@@ -727,17 +990,33 @@ static int da9062_regulator_probe(struct platform_device *pdev) struct da9062_regulators *regulators; struct da9062_regulator *regl; struct regulator_config config = { }; + const struct da9062_regulator_info *rinfo; int irq, n, ret; size_t size; + int max_regulators; + + switch (chip->chip_type) { + case COMPAT_TYPE_DA9061: + max_regulators = DA9061_MAX_REGULATORS; + rinfo = local_da9061_regulator_info; + break; + case COMPAT_TYPE_DA9062: + max_regulators = DA9062_MAX_REGULATORS; + rinfo = local_da9062_regulator_info; + break; + default: + dev_err(chip->dev, "Unrecognised chip type\n"); + return -ENODEV; + } /* Allocate memory required by usable regulators */ size = sizeof(struct da9062_regulators) + - DA9062_MAX_REGULATORS * sizeof(struct da9062_regulator); + max_regulators * sizeof(struct da9062_regulator); regulators = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); if (!regulators) return -ENOMEM; - regulators->n_regulators = DA9062_MAX_REGULATORS; + regulators->n_regulators = max_regulators; platform_set_drvdata(pdev, regulators); n = 0;
@@ -745,7 +1024,7 @@ static int da9062_regulator_probe(struct platform_device *pdev) /* Initialise regulator structure */ regl = ®ulators->regulator[n]; regl->hw = chip; - regl->info = &local_regulator_info[n]; + regl->info = &rinfo[n]; regl->desc = regl->info->desc; regl->desc.type = REGULATOR_VOLTAGE; regl->desc.owner = THIS_MODULE;
@@ -836,6 +1115,6 @@ static void __exit da9062_regulator_cleanup(void) /* Module information */ MODULE_AUTHOR("S Twiss <stwiss.opensource-WBD+wuPFNBhBDgjK7y7TUQ@public.gmane.org>"); -MODULE_DESCRIPTION("REGULATOR device driver for Dialog DA9062"); +MODULE_DESCRIPTION("REGULATOR device driver for Dialog DA9062 and DA9061"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:da9062-regulators");
--
end-of-patch for RESEND PATCH V7
--
To unsubscribe from this list: send the line "unsubscribe linux-watchdog" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html