# Re: \[PATCH\] Input: silead - Add support for ACPI bus power methods

- From: Hans de Goede \<hidden\>
- Date: 2017-01-22 19:54:54 
- List: linux-input
- Page: https://ratatoskr.run/linux-input/2017/01/8929121
- Thread: https://ratatoskr.run/linux-input/2017/01/8929015/t.md

```text
Hi,

On 21-01-17 18:33, Dmitry Torokhov wrote:
> Hi Hans,
>
> On Sun, Jan 01, 2017 at 10:30:04PM +0100, Hans de Goede wrote:
>> On some x86 tablets we cannot directly access the GPIOs as they are
>> claimed by the ACPI tables, so first try using acpi_bus_set_power
>> and if that works use that instead of directly accessing the GPIO.
>
> This does not belong to individual drivers but either to various buses
> (spi, i2c, etc), or to the ACPI power domain code.

I agree with you on this, and upon checking it turns out that the i2c
core already connects the acpi power-domain to the struct device for
the i2c client.

So all we need to do is not touch the gpio when ACPI is doing the
powermanagent I'll send a new version for this.

Regards,

Hans


>>
>> Signed-off-by: Hans de Goede <redacted>
>> ---
>>  drivers/input/touchscreen/silead.c | 32 +++++++++++++++++++++++++-------
>>  1 file changed, 25 insertions(+), 7 deletions(-)
>>
>> diff --git a/drivers/input/touchscreen/silead.c b/drivers/input/touchscreen/silead.c
>> index f502c84..d3dd9bb 100644
>> --- a/drivers/input/touchscreen/silead.c
>> +++ b/drivers/input/touchscreen/silead.c
>> @@ -30,6 +30,7 @@
>>  #include <linux/pm.h>
>>  #include <linux/irq.h>
>>
>> +#include <acpi/acpi_bus.h>
>>  #include <asm/unaligned.h>
>>
>>  #define SILEAD_TS_NAME		"silead_ts"
>> @@ -71,6 +72,7 @@ enum silead_ts_power {
>>
>>  struct silead_ts_data {
>>  	struct i2c_client *client;
>> +	bool acpi_power;
>>  	struct gpio_desc *gpio_power;
>>  	struct input_dev *input;
>>  	char fw_name[64];
>> @@ -125,7 +127,14 @@ static void silead_ts_set_power(struct i2c_client *client,
>>  {
>>  	struct silead_ts_data *data = i2c_get_clientdata(client);
>>
>> -	if (data->gpio_power) {
>> +	if (data->acpi_power) {
>> +#ifdef CONFIG_ACPI
>> +		int ret = acpi_bus_set_power(ACPI_HANDLE(&client->dev),
>> +					state ? ACPI_STATE_D0 : ACPI_STATE_D3);
>> +		if (ret)
>> +			dev_err(&client->dev, "Power error %d\n", ret);
>> +#endif
>> +	} else if (data->gpio_power) {
>>  		gpiod_set_value_cansleep(data->gpio_power, state);
>>  		msleep(SILEAD_POWER_SLEEP);
>>  	}
>> @@ -465,12 +474,21 @@ static int silead_ts_probe(struct i2c_client *client,
>>  	if (client->irq <= 0)
>>  		return -ENODEV;
>>
>> -	/* Power GPIO pin */
>> -	data->gpio_power = devm_gpiod_get_optional(dev, "power", GPIOD_OUT_LOW);
>> -	if (IS_ERR(data->gpio_power)) {
>> -		if (PTR_ERR(data->gpio_power) != -EPROBE_DEFER)
>> -			dev_err(dev, "Shutdown GPIO request failed\n");
>> -		return PTR_ERR(data->gpio_power);
>> +	/* Power handling, try ACPI companion method first then GPIO */
>> +#ifdef CONFIG_ACPI
>> +	if (ACPI_COMPANION(&client->dev) &&
>> +	    acpi_bus_set_power(ACPI_HANDLE(&client->dev), ACPI_STATE_D3) == 0)
>> +		data->acpi_power = true;
>> +	else
>> +#endif
>> +	{
>> +		data->gpio_power = devm_gpiod_get_optional(dev, "power",
>> +							   GPIOD_OUT_LOW);
>> +		if (IS_ERR(data->gpio_power)) {
>> +			if (PTR_ERR(data->gpio_power) != -EPROBE_DEFER)
>> +				dev_err(dev, "Power GPIO request failed\n");
>> +			return PTR_ERR(data->gpio_power);
>> +		}
>>  	}
>>
>>  	error = silead_ts_setup(client);
>> --
>> 2.9.3
>>
>
> Thanks.
>
```
