# Re: Goodix touchscreen works intermittently, fails reading config info.

- List: linux-input
- 5 messages, 3 authors
- Page: https://ratatoskr.run/linux-input/2016/09/8928448/t

## Re: Goodix touchscreen works intermittently, fails reading config info.

- From: Brad Baker \<hidden\>
- Date: 2016-09-12 17:32:17 
- Message: https://ratatoskr.run/linux-input/2016/09/8928448.md

```text
Irina,
  The user just reported... "the TS is not working every time, here is
a log from when it is not working". The below logging appears to show
that setting the default trigger_type=0 when read_config fails does
not make a difference.  His statement that it's not working *every
time* is curious because he said before it was working like 9 out of
10 times he booted up.

http://pastebin.com/hpWbgpTe
[   10.922484] Goodix-TS i2c-GDIX1001:00: ID 9111, version: 1060
[   10.927791] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
x_max: 0, y_max: 0, touch_num: 0, trigger_type: 0
[   10.927797] Goodix-TS i2c-GDIX1001:00: Invalid config, using defaults
[   10.927912] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
x_max: 2160, y_max: 2160, touch_num: 10, trigger_type: 0
[   10.928112] input: Goodix Capacitive TouchScreen as
/devices/pci0000:00/808622C1:05/i2c-13/i2c-GDIX1001:00/input/input6

source: https://github.com/blocksonic/gt9xx/blob/device-tree/goodix.c

I'm waiting for him to send the ACPI table data you requested.  I was
not sure exactly how to do this. I asked him to run this series of
commands which worked on my machine.  Is it OK?

mkdir ~/acpitables
cd /sys/firmware/acpi/tables/
for i in * ; do sudo cat $i > ~/acpitables/$i.dat; done
cd ~/acpitables
for i in * ; do iasl -d $i ; done
cat *.dsl >> chuwi_hi12_acpi.dsl

Also: following is an older log prior to my code changes where
read_config was succeeding but the user reported the touchscreen was
registering touch events in the wrong place.  This may have been some
fluke as he has not been reporting this type of problem happening
often or since.  Also appended to the end of this log is output from
dmidecode if it's  helpful:  http://pastebin.com/6QWF6JB8


On Sun, Sep 11, 2016 at 4:28 PM, Brad Baker [ref] wrote:
> Hi Irina,
>   I don't have the tablet. The user's last reply yesterday was this:
> "here is a log of the, TS working with your latest edits
> http://pastebin.com/mhMpa3Zj . it might be a couple days before i can
> do much more testing on it.  "
> So I'm still waiting to find out if my changing the default
> trigger_type=0 had any effect when read_config fails.
> That log of the working case shows things as expected.
>
> [   12.356637] goodix_backport: loading out-of-tree module taints kernel.
> [   12.356739] goodix_backport: module verification failed: signature
> and/or required key missing - tainting kernel
> [   12.364644] intel_sst_acpi 808622A8:00: No matching machine driver found
> [   12.365892] Goodix-TS i2c-GDIX1001:00: ID 9111, version: 1060
> [   12.373813] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
> x_max: 2160, y_max: 2160, touch_num: 10, trigger_type: 0
> [   12.373822] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
> x_max: 2160, y_max: 2160, touch_num: 10, trigger_type: 0
> [   12.373998] input: Goodix Capacitive TouchScreen as
> /devices/pci0000:00/808622C1:05/i2c-13/i2c-GDIX1001:00/input/input6
>
>
>
> On Sun, Sep 11, 2016 at 3:54 PM, Tirdea, Irina [ref] wrote:
>>
>>
>>> -----Original Message-----
>>> From: <redacted> [mailto:<redacted>] On Behalf Of Brad Baker
>>> Sent: 11 September, 2016 0:21
>>> To: bastien nocera
>>> Cc: <redacted>
>>> Subject: Goodix touchscreen works intermittently, fails reading config info.
>>>
>>> Summary: Goodix touchscreen works intermittently, fails reading config info.
>>>  https://bugzilla.kernel.org/show_bug.cgi?id=156511
>>>
>>> Description:  Chuwi Hi12 tablet with Intel cherry-trail Atom Z8300,
>>> the touchscreen does work after bootup most of the time, but sometimes
>>> it does not work without running modprobe.  When it fails the dmesg
>>> log shows the error "Invalid config, using defaults" and when it works
>>> this error is not present.
>>>
>>> Module: goodix, goodix_backport
>>> Linux version 4.8.0-040800rc5-generic (kernel@tangerine) (gcc version
>>> 6.2.0 20160830 (Ubuntu 6.2.0-2ubuntu11) ) #201609041832 SMP Sun Sep 4
>>> 22:34:01 UTC 2016
>>>
>>> dmesg log when it's failing:
>>> [ 10.012314] Goodix-TS i2c-GDIX1001:00: ID 9111, version: 1060
>>> [ 10.017711] Goodix-TS i2c-GDIX1001:00: Invalid config, using defaults
>>> [ 10.018021] input: Goodix Capacitive TouchScreen as
>>> /devices/pci0000:00/808622C1:05/i2c-13/i2c-GDIX1001:00/input/input6
>>>
>>> details given in bugzilla #156511
>>
>> Hi Brad,
>>
>> I had similar problems with some Goodix devices until I enabled the
>> reset sequence [1].
>>
>> Although the touch screen was initialized and I could read/write to/from
>> the device, I read only 0s from the configuration registers. The datasheet
>> recommends using the reset procedure at power on, so I could not find any
>> information on how to make the device work reliably without it. Resetting the
>> device at boot fixed the problem for me. For backwards compatibility, the
>> reset sequence is only available if the interrupt and reset gpio pins are
>> connected and configured through _DSD properties in the ACPI table or DT
>> properties.
>>
>> One reason for the touchscreen not working in this case is that the interrupts
>> are not properly configured. I noticed in the Bugzilla details that you already
>> tried changing the default value for trigger_type to the one read from the device.
>> Did that work?
>>
>> Regards,
>> Irina
>>
>> [1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ec6e1b4082d9f5b0858ce33169a1c22a27a982f6
```

## Re: Goodix touchscreen works intermittently, fails reading config info.

- From: Brad Baker \<hidden\>
- Date: 2016-09-12 17:43:33 
- Message: https://ratatoskr.run/linux-input/2016/09/8928449.md

```text
Irina, here is the ACPI table data you requested for this device
(Chuwi Hi12 tablet) : http://pastebin.com/84cjD8kp

On Mon, Sep 12, 2016 at 2:32 PM, Brad Baker [ref] wrote:
> Irina,
>   The user just reported... "the TS is not working every time, here is
> a log from when it is not working". The below logging appears to show
> that setting the default trigger_type=0 when read_config fails does
> not make a difference.  His statement that it's not working *every
> time* is curious because he said before it was working like 9 out of
> 10 times he booted up.
>
> http://pastebin.com/hpWbgpTe
> [   10.922484] Goodix-TS i2c-GDIX1001:00: ID 9111, version: 1060
> [   10.927791] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
> x_max: 0, y_max: 0, touch_num: 0, trigger_type: 0
> [   10.927797] Goodix-TS i2c-GDIX1001:00: Invalid config, using defaults
> [   10.927912] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
> x_max: 2160, y_max: 2160, touch_num: 10, trigger_type: 0
> [   10.928112] input: Goodix Capacitive TouchScreen as
> /devices/pci0000:00/808622C1:05/i2c-13/i2c-GDIX1001:00/input/input6
>
> source: https://github.com/blocksonic/gt9xx/blob/device-tree/goodix.c
>
> I'm waiting for him to send the ACPI table data you requested.  I was
> not sure exactly how to do this. I asked him to run this series of
> commands which worked on my machine.  Is it OK?
>
> mkdir ~/acpitables
> cd /sys/firmware/acpi/tables/
> for i in * ; do sudo cat $i > ~/acpitables/$i.dat; done
> cd ~/acpitables
> for i in * ; do iasl -d $i ; done
> cat *.dsl >> chuwi_hi12_acpi.dsl
>
> Also: following is an older log prior to my code changes where
> read_config was succeeding but the user reported the touchscreen was
> registering touch events in the wrong place.  This may have been some
> fluke as he has not been reporting this type of problem happening
> often or since.  Also appended to the end of this log is output from
> dmidecode if it's  helpful:  http://pastebin.com/6QWF6JB8
>
>
> On Sun, Sep 11, 2016 at 4:28 PM, Brad Baker [ref] wrote:
>> Hi Irina,
>>   I don't have the tablet. The user's last reply yesterday was this:
>> "here is a log of the, TS working with your latest edits
>> http://pastebin.com/mhMpa3Zj . it might be a couple days before i can
>> do much more testing on it.  "
>> So I'm still waiting to find out if my changing the default
>> trigger_type=0 had any effect when read_config fails.
>> That log of the working case shows things as expected.
>>
>> [   12.356637] goodix_backport: loading out-of-tree module taints kernel.
>> [   12.356739] goodix_backport: module verification failed: signature
>> and/or required key missing - tainting kernel
>> [   12.364644] intel_sst_acpi 808622A8:00: No matching machine driver found
>> [   12.365892] Goodix-TS i2c-GDIX1001:00: ID 9111, version: 1060
>> [   12.373813] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
>> x_max: 2160, y_max: 2160, touch_num: 10, trigger_type: 0
>> [   12.373822] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
>> x_max: 2160, y_max: 2160, touch_num: 10, trigger_type: 0
>> [   12.373998] input: Goodix Capacitive TouchScreen as
>> /devices/pci0000:00/808622C1:05/i2c-13/i2c-GDIX1001:00/input/input6
>>
>>
>>
>> On Sun, Sep 11, 2016 at 3:54 PM, Tirdea, Irina [ref] wrote:
>>>
>>>
>>>> -----Original Message-----
>>>> From: <redacted> [mailto:<redacted>] On Behalf Of Brad Baker
>>>> Sent: 11 September, 2016 0:21
>>>> To: bastien nocera
>>>> Cc: <redacted>
>>>> Subject: Goodix touchscreen works intermittently, fails reading config info.
>>>>
>>>> Summary: Goodix touchscreen works intermittently, fails reading config info.
>>>>  https://bugzilla.kernel.org/show_bug.cgi?id=156511
>>>>
>>>> Description:  Chuwi Hi12 tablet with Intel cherry-trail Atom Z8300,
>>>> the touchscreen does work after bootup most of the time, but sometimes
>>>> it does not work without running modprobe.  When it fails the dmesg
>>>> log shows the error "Invalid config, using defaults" and when it works
>>>> this error is not present.
>>>>
>>>> Module: goodix, goodix_backport
>>>> Linux version 4.8.0-040800rc5-generic (kernel@tangerine) (gcc version
>>>> 6.2.0 20160830 (Ubuntu 6.2.0-2ubuntu11) ) #201609041832 SMP Sun Sep 4
>>>> 22:34:01 UTC 2016
>>>>
>>>> dmesg log when it's failing:
>>>> [ 10.012314] Goodix-TS i2c-GDIX1001:00: ID 9111, version: 1060
>>>> [ 10.017711] Goodix-TS i2c-GDIX1001:00: Invalid config, using defaults
>>>> [ 10.018021] input: Goodix Capacitive TouchScreen as
>>>> /devices/pci0000:00/808622C1:05/i2c-13/i2c-GDIX1001:00/input/input6
>>>>
>>>> details given in bugzilla #156511
>>>
>>> Hi Brad,
>>>
>>> I had similar problems with some Goodix devices until I enabled the
>>> reset sequence [1].
>>>
>>> Although the touch screen was initialized and I could read/write to/from
>>> the device, I read only 0s from the configuration registers. The datasheet
>>> recommends using the reset procedure at power on, so I could not find any
>>> information on how to make the device work reliably without it. Resetting the
>>> device at boot fixed the problem for me. For backwards compatibility, the
>>> reset sequence is only available if the interrupt and reset gpio pins are
>>> connected and configured through _DSD properties in the ACPI table or DT
>>> properties.
>>>
>>> One reason for the touchscreen not working in this case is that the interrupts
>>> are not properly configured. I noticed in the Bugzilla details that you already
>>> tried changing the default value for trigger_type to the one read from the device.
>>> Did that work?
>>>
>>> Regards,
>>> Irina
>>>
>>> [1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ec6e1b4082d9f5b0858ce33169a1c22a27a982f6
```

## Re: Goodix touchscreen works intermittently, fails reading config info.

- From: Brad Baker \<hidden\>
- Date: 2016-09-13 03:04:48 
- Message: https://ratatoskr.run/linux-input/2016/09/8928452.md

```text
Irina, a little more info on the symptoms. The user reports the
touchscreen works when restarting but fails when powering on.  He says
pretty much 100% of the time.  The log is the same...

http://pastebin.com/25haaPQd
[   10.246074] goodix_backport: loading out-of-tree module taints kernel.
[   10.246172] goodix_backport: module verification failed: signature
and/or required key missing - tainting kernel
[   10.263788] Goodix-TS i2c-GDIX1001:00: ID 9111, version: 1060
[   10.270135] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
x_max: 0, y_max: 0, touch_num: 0, trigger_type: 0
[   10.270141] Goodix-TS i2c-GDIX1001:00: Invalid config, using defaults
[   10.270258] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
x_max: 2160, y_max: 2160, touch_num: 10, trigger_type: 0
[   10.270608] input: Goodix Capacitive TouchScreen as
/devices/pci0000:00/808622C1:05/i2c-13/i2c-GDIX1001:00/input/input6

On Mon, Sep 12, 2016 at 2:32 PM, Brad Baker [ref] wrote:
> Irina,
>   The user just reported... "the TS is not working every time, here is
> a log from when it is not working". The below logging appears to show
> that setting the default trigger_type=0 when read_config fails does
> not make a difference.  His statement that it's not working *every
> time* is curious because he said before it was working like 9 out of
> 10 times he booted up.
>
> http://pastebin.com/hpWbgpTe
> [   10.922484] Goodix-TS i2c-GDIX1001:00: ID 9111, version: 1060
> [   10.927791] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
> x_max: 0, y_max: 0, touch_num: 0, trigger_type: 0
> [   10.927797] Goodix-TS i2c-GDIX1001:00: Invalid config, using defaults
> [   10.927912] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
> x_max: 2160, y_max: 2160, touch_num: 10, trigger_type: 0
> [   10.928112] input: Goodix Capacitive TouchScreen as
> /devices/pci0000:00/808622C1:05/i2c-13/i2c-GDIX1001:00/input/input6
>
> source: https://github.com/blocksonic/gt9xx/blob/device-tree/goodix.c
>
> I'm waiting for him to send the ACPI table data you requested.  I was
> not sure exactly how to do this. I asked him to run this series of
> commands which worked on my machine.  Is it OK?
>
> mkdir ~/acpitables
> cd /sys/firmware/acpi/tables/
> for i in * ; do sudo cat $i > ~/acpitables/$i.dat; done
> cd ~/acpitables
> for i in * ; do iasl -d $i ; done
> cat *.dsl >> chuwi_hi12_acpi.dsl
>
> Also: following is an older log prior to my code changes where
> read_config was succeeding but the user reported the touchscreen was
> registering touch events in the wrong place.  This may have been some
> fluke as he has not been reporting this type of problem happening
> often or since.  Also appended to the end of this log is output from
> dmidecode if it's  helpful:  http://pastebin.com/6QWF6JB8
>
>
> On Sun, Sep 11, 2016 at 4:28 PM, Brad Baker [ref] wrote:
>> Hi Irina,
>>   I don't have the tablet. The user's last reply yesterday was this:
>> "here is a log of the, TS working with your latest edits
>> http://pastebin.com/mhMpa3Zj . it might be a couple days before i can
>> do much more testing on it.  "
>> So I'm still waiting to find out if my changing the default
>> trigger_type=0 had any effect when read_config fails.
>> That log of the working case shows things as expected.
>>
>> [   12.356637] goodix_backport: loading out-of-tree module taints kernel.
>> [   12.356739] goodix_backport: module verification failed: signature
>> and/or required key missing - tainting kernel
>> [   12.364644] intel_sst_acpi 808622A8:00: No matching machine driver found
>> [   12.365892] Goodix-TS i2c-GDIX1001:00: ID 9111, version: 1060
>> [   12.373813] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
>> x_max: 2160, y_max: 2160, touch_num: 10, trigger_type: 0
>> [   12.373822] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
>> x_max: 2160, y_max: 2160, touch_num: 10, trigger_type: 0
>> [   12.373998] input: Goodix Capacitive TouchScreen as
>> /devices/pci0000:00/808622C1:05/i2c-13/i2c-GDIX1001:00/input/input6
>>
>>
>>
>> On Sun, Sep 11, 2016 at 3:54 PM, Tirdea, Irina [ref] wrote:
>>>
>>>
>>>> -----Original Message-----
>>>> From: <redacted> [mailto:<redacted>] On Behalf Of Brad Baker
>>>> Sent: 11 September, 2016 0:21
>>>> To: bastien nocera
>>>> Cc: <redacted>
>>>> Subject: Goodix touchscreen works intermittently, fails reading config info.
>>>>
>>>> Summary: Goodix touchscreen works intermittently, fails reading config info.
>>>>  https://bugzilla.kernel.org/show_bug.cgi?id=156511
>>>>
>>>> Description:  Chuwi Hi12 tablet with Intel cherry-trail Atom Z8300,
>>>> the touchscreen does work after bootup most of the time, but sometimes
>>>> it does not work without running modprobe.  When it fails the dmesg
>>>> log shows the error "Invalid config, using defaults" and when it works
>>>> this error is not present.
>>>>
>>>> Module: goodix, goodix_backport
>>>> Linux version 4.8.0-040800rc5-generic (kernel@tangerine) (gcc version
>>>> 6.2.0 20160830 (Ubuntu 6.2.0-2ubuntu11) ) #201609041832 SMP Sun Sep 4
>>>> 22:34:01 UTC 2016
>>>>
>>>> dmesg log when it's failing:
>>>> [ 10.012314] Goodix-TS i2c-GDIX1001:00: ID 9111, version: 1060
>>>> [ 10.017711] Goodix-TS i2c-GDIX1001:00: Invalid config, using defaults
>>>> [ 10.018021] input: Goodix Capacitive TouchScreen as
>>>> /devices/pci0000:00/808622C1:05/i2c-13/i2c-GDIX1001:00/input/input6
>>>>
>>>> details given in bugzilla #156511
>>>
>>> Hi Brad,
>>>
>>> I had similar problems with some Goodix devices until I enabled the
>>> reset sequence [1].
>>>
>>> Although the touch screen was initialized and I could read/write to/from
>>> the device, I read only 0s from the configuration registers. The datasheet
>>> recommends using the reset procedure at power on, so I could not find any
>>> information on how to make the device work reliably without it. Resetting the
>>> device at boot fixed the problem for me. For backwards compatibility, the
>>> reset sequence is only available if the interrupt and reset gpio pins are
>>> connected and configured through _DSD properties in the ACPI table or DT
>>> properties.
>>>
>>> One reason for the touchscreen not working in this case is that the interrupts
>>> are not properly configured. I noticed in the Bugzilla details that you already
>>> tried changing the default value for trigger_type to the one read from the device.
>>> Did that work?
>>>
>>> Regards,
>>> Irina
>>>
>>> [1] https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=ec6e1b4082d9f5b0858ce33169a1c22a27a982f6
```

## RE: Goodix touchscreen works intermittently, fails reading config info.

- From: Tirdea, Irina \<hidden\>
- Date: 2016-09-14 09:30:12 
- Message: https://ratatoskr.run/linux-input/2016/09/8928472.md

```text


> -----Original Message-----
> From: <redacted> [mailto:<redacted>] On Behalf Of Brad Baker
> Sent: 13 September, 2016 6:05
> To: Tirdea, Irina
> Cc: bastien nocera; <redacted>
> Subject: Re: Goodix touchscreen works intermittently, fails reading config info.
> 
> Irina, a little more info on the symptoms. The user reports the
> touchscreen works when restarting but fails when powering on.  He says
> pretty much 100% of the time.  The log is the same...
> 

Hi Brad,

Thanks for all the information you provided. I have already replied on the
Bugzilla thread with some patches that enable reset for the device.

Regards,
Irina


> http://pastebin.com/25haaPQd
> [   10.246074] goodix_backport: loading out-of-tree module taints kernel.
> [   10.246172] goodix_backport: module verification failed: signature
> and/or required key missing - tainting kernel
> [   10.263788] Goodix-TS i2c-GDIX1001:00: ID 9111, version: 1060
> [   10.270135] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
> x_max: 0, y_max: 0, touch_num: 0, trigger_type: 0
> [   10.270141] Goodix-TS i2c-GDIX1001:00: Invalid config, using defaults
> [   10.270258] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
> x_max: 2160, y_max: 2160, touch_num: 10, trigger_type: 0
> [   10.270608] input: Goodix Capacitive TouchScreen as
> /devices/pci0000:00/808622C1:05/i2c-13/i2c-GDIX1001:00/input/input6
> 

```

## Re: Goodix touchscreen works intermittently, fails reading config info.

- From: sergk sergk2mail \<hidden\>
- Date: 2016-10-12 19:48:42 
- Message: https://ratatoskr.run/linux-input/2016/10/8928649.md

```text
Hello from ;-) Chuwi tablets warrior.
Actually have done all requested, .cfg, bin, working module, etc are
located : https://gitlab.com/SergK/chuwi_hi12/tree/master.

Many thanks and regards,
                             Serge Kolotylo.


On Wed, Sep 14, 2016 at 9:29 AM, Tirdea, Irina [ref] wrote:
>
>
>> -----Original Message-----
>> From: <redacted> [mailto:<redacted>] On Behalf Of Brad Baker
>> Sent: 13 September, 2016 6:05
>> To: Tirdea, Irina
>> Cc: bastien nocera; <redacted>
>> Subject: Re: Goodix touchscreen works intermittently, fails reading config info.
>>
>> Irina, a little more info on the symptoms. The user reports the
>> touchscreen works when restarting but fails when powering on.  He says
>> pretty much 100% of the time.  The log is the same...
>>
>
> Hi Brad,
>
> Thanks for all the information you provided. I have already replied on the
> Bugzilla thread with some patches that enable reset for the device.
>
> Regards,
> Irina
>
>
>> http://pastebin.com/25haaPQd
>> [   10.246074] goodix_backport: loading out-of-tree module taints kernel.
>> [   10.246172] goodix_backport: module verification failed: signature
>> and/or required key missing - tainting kernel
>> [   10.263788] Goodix-TS i2c-GDIX1001:00: ID 9111, version: 1060
>> [   10.270135] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
>> x_max: 0, y_max: 0, touch_num: 0, trigger_type: 0
>> [   10.270141] Goodix-TS i2c-GDIX1001:00: Invalid config, using defaults
>> [   10.270258] Goodix-TS i2c-GDIX1001:00: dev_info: cfg_len: 186,
>> x_max: 2160, y_max: 2160, touch_num: 10, trigger_type: 0
>> [   10.270608] input: Goodix Capacitive TouchScreen as
>> /devices/pci0000:00/808622C1:05/i2c-13/i2c-GDIX1001:00/input/input6
>>
>
```
