# Re: Sony Vaio Duo 11: getting middle mouse button to work

- From: Stefan Seidel \<hidden\>
- Date: 2016-08-12 19:41:29 
- List: linux-input
- Page: https://ratatoskr.run/linux-input/2016/08/8928352
- Thread: https://ratatoskr.run/linux-input/2016/08/8928349/t.md

```text
Hi Benjamin,

thanks.

> The answer is different in the first case and 7 seconds after (I assume
> you toggled the setting there) -> frame 16 and 33 in the first log.
>
> I'd say the first log would be:
> - 1.  -> SET_IDLE (you can ignore it)
> - 3.  -> SET_REPORT on OUTPUT 2, length 5 no data
>       -> answer in 4.  -> 02 04 02 00 00
> - 5.  -> SET CONFIGURATION Status (ignore this as well I think)
> - 6.  -> SET_REPORT on OUTPUT 2, length 5 no data
>       -> answer in 7.  -> 02 06 00 00 00
> - 9.  -> SET_REPORT on OUTPUT 2, length 5 no data
>       -> answer in 10. -> 02 05 01 00 00
> - 12. -> SET_REPORT on OUTPUT 2, length 5 no data
>       -> answer in 13. -> 02 02 01 00 00
> - 16. -> SET_REPORT on OUTPUT 2, length 5 no data
>       -> answer in 14. -> 02 03 01 00 00
>
> The second sequence (frames 18 to 34) provides the same output except
> for the last answer 02 03 00 00 00.

Yes, that was my analysis as well. Thanks for confirming this.

> The "no data" part seems weird, but there is a chance if you output a
> report with 02 03 00 00 00 or 02 03 01 00 00, this toggles the behavior.

Yes, I was wondering about exactly that, maybe I need to read up on the limitations of USBPcap to find out why apparently no outgoing data is reported. But I will try sending it as you suggest.

> If you start working in kernel space, start with a small hid driver and
> in .probe() try accessing the device with the event sequences you got.
>
> If you start working with hidraw, there is an example in the kernel
> tree: samples/hidraw/hid-example.c.

Thanks for these hints! I realized I already did work on HID stuff once when I amended a userspace program for a USB FM transmitter that registered as HID device. I will try your suggestions.

Stefan


```
