[PATCH 0/4] Input: use parallel port device model

@@ -53,7 +53,7 @@ struct gc_config {
 	unsigned int nargs;
 };
 
-static struct gc_config gc_cfg[GC_MAX_PORTS] __initdata;
+static struct gc_config gc_cfg[GC_MAX_PORTS];
 
 module_param_array_named(map, gc_cfg[0].args, int, &gc_cfg[0].nargs, 0);
 MODULE_PARM_DESC(map, "Describes first set of devices (<parport#>,<pad1>,<pad2>,..<pad5>)");

@@ -92,6 +92,7 @@ struct gc {
 	struct timer_list timer;
 	int pad_count[GC_MAX];
 	int used;
+	int parportno;
 	struct mutex mutex;
 };
 

@@ -304,7 +305,7 @@ static int gc_n64_play_effect(struct input_dev *dev, void *data,
 	return 0;
 }
 
-static int __init gc_n64_init_ff(struct input_dev *dev, int i)
+static int gc_n64_init_ff(struct input_dev *dev, int i)
 {
 	struct gc_subdev *sdev;
 	int err;

@@ -811,7 +812,7 @@ static void gc_close(struct input_dev *dev)
 	mutex_unlock(&gc->mutex);
 }
 
-static int __init gc_setup_pad(struct gc *gc, int idx, int pad_type)
+static int gc_setup_pad(struct gc *gc, int idx, int pad_type)
 {
 	struct gc_pad *pad = &gc->pads[idx];
 	struct input_dev *input_dev;

@@ -926,46 +927,54 @@ err_free_dev:
 	return err;
 }
 
-static struct gc __init *gc_probe(int parport, int *pads, int n_pads)
+static void gc_attach(struct parport *pp)
 {
 	struct gc *gc;
-	struct parport *pp;
 	struct pardevice *pd;
 	int i;
 	int count = 0;
-	int err;
+	int *pads, n_pads;
+	struct pardev_cb gc_parport_cb;
+
+	for (i = 0; i < GC_MAX_PORTS; i++) {
+		if (gc_cfg[i].nargs == 0 || gc_cfg[i].args[0] < 0)
+			continue;
+
+		if (gc_cfg[i].args[0] == pp->number)
+			break;
+	}
 
-	pp = parport_find_number(parport);
-	if (!pp) {
-		pr_err("no such parport %d\n", parport);
-		err = -EINVAL;
-		goto err_out;
+	if (i == GC_MAX_PORTS) {
+		pr_debug("Not using parport%d.\n", pp->number);
+		return;
 	}
+	pads = gc_cfg[i].args + 1;
+	n_pads = gc_cfg[i].nargs - 1;
+
+	gc_parport_cb.flags = PARPORT_FLAG_EXCL;
 
-	pd = parport_register_device(pp, "gamecon", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
+	pd = parport_register_dev_model(pp, "gamecon", &gc_parport_cb, i);
 	if (!pd) {
 		pr_err("parport busy already - lp.o loaded?\n");
-		err = -EBUSY;
-		goto err_put_pp;
+		return;
 	}
 
 	gc = kzalloc(sizeof(struct gc), GFP_KERNEL);
 	if (!gc) {
 		pr_err("Not enough memory\n");
-		err = -ENOMEM;
 		goto err_unreg_pardev;
 	}
 
 	mutex_init(&gc->mutex);
 	gc->pd = pd;
+	gc->parportno = pp->number;
 	setup_timer(&gc->timer, gc_timer, (long) gc);
 
 	for (i = 0; i < n_pads && i < GC_MAX_DEVICES; i++) {
 		if (!pads[i])
 			continue;
 
-		err = gc_setup_pad(gc, i, pads[i]);
-		if (err)
+		if (gc_setup_pad(gc, i, pads[i]))
 			goto err_unreg_devs;
 
 		count++;

@@ -973,12 +982,11 @@ static struct gc __init *gc_probe(int parport, int *pads, int n_pads)
 
 	if (count == 0) {
 		pr_err("No valid devices specified\n");
-		err = -EINVAL;
 		goto err_free_gc;
 	}
 
-	parport_put_port(pp);
-	return gc;
+	gc_base[i] = gc;
+	return;
 
  err_unreg_devs:
 	while (--i >= 0)

@@ -988,15 +996,23 @@ static struct gc __init *gc_probe(int parport, int *pads, int n_pads)
 	kfree(gc);
  err_unreg_pardev:
 	parport_unregister_device(pd);
- err_put_pp:
-	parport_put_port(pp);
- err_out:
-	return ERR_PTR(err);
 }
 
-static void gc_remove(struct gc *gc)
+static void gc_detach(struct parport *port)
 {
 	int i;
+	struct gc *gc;
+
+	for (i = 0; i < GC_MAX_PORTS; i++) {
+		if (gc_base[i] && gc_base[i]->parportno == port->number)
+			break;
+	}
+
+	if (i == GC_MAX_PORTS)
+		return;
+
+	gc = gc_base[i];
+	gc_base[i] = NULL;
 
 	for (i = 0; i < GC_MAX_DEVICES; i++)
 		if (gc->pads[i].dev)

@@ -1005,11 +1021,17 @@ static void gc_remove(struct gc *gc)
 	kfree(gc);
 }
 
+static struct parport_driver gc_parport_driver = {
+	.name = "gamecon",
+	.match_port = gc_attach,
+	.detach = gc_detach,
+	.devmodel = true,
+};
+
 static int __init gc_init(void)
 {
 	int i;
 	int have_dev = 0;
-	int err = 0;
 
 	for (i = 0; i < GC_MAX_PORTS; i++) {
 		if (gc_cfg[i].nargs == 0 || gc_cfg[i].args[0] < 0)

@@ -1017,37 +1039,21 @@ static int __init gc_init(void)
 
 		if (gc_cfg[i].nargs < 2) {
 			pr_err("at least one device must be specified\n");
-			err = -EINVAL;
-			break;
-		}
-
-		gc_base[i] = gc_probe(gc_cfg[i].args[0],
-				      gc_cfg[i].args + 1, gc_cfg[i].nargs - 1);
-		if (IS_ERR(gc_base[i])) {
-			err = PTR_ERR(gc_base[i]);
-			break;
+			return -EINVAL;
 		}
 
 		have_dev = 1;
 	}
 
-	if (err) {
-		while (--i >= 0)
-			if (gc_base[i])
-				gc_remove(gc_base[i]);
-		return err;
-	}
+	if (!have_dev)
+		return -ENODEV;
 
-	return have_dev ? 0 : -ENODEV;
+	return parport_register_driver(&gc_parport_driver);
 }
 
 static void __exit gc_exit(void)
 {
-	int i;
-
-	for (i = 0; i < GC_MAX_PORTS; i++)
-		if (gc_base[i])
-			gc_remove(gc_base[i]);
+	parport_unregister_driver(&gc_parport_driver);
 }
 
 module_init(gc_init);

@@ -200,35 +200,38 @@ static void walkera0701_close(struct input_dev *dev)
 	parport_release(w->pardevice);
 }
 
-static int walkera0701_connect(struct walkera_dev *w, int parport)
+static void walkera0701_attach(struct parport *pp)
 {
-	int error;
+	struct pardev_cb walkera0701_parport_cb;
+	struct walkera_dev *w = &w_dev;
 
-	w->parport = parport_find_number(parport);
-	if (!w->parport) {
-		pr_err("parport %d does not exist\n", parport);
-		return -ENODEV;
+	if (pp->number != walkera0701_pp_no) {
+		pr_debug("Not using parport%d.\n", pp->number);
+		return;
 	}
 
-	if (w->parport->irq == -1) {
+	if (pp->irq == -1) {
 		pr_err("parport %d does not have interrupt assigned\n",
-			parport);
-		error = -EINVAL;
-		goto err_put_parport;
+			pp->number);
+		return;
 	}
 
-	w->pardevice = parport_register_device(w->parport, "walkera0701",
-				    NULL, NULL, walkera0701_irq_handler,
-				    PARPORT_DEV_EXCL, w);
+	w->parport = pp;
+
+	walkera0701_parport_cb.flags = PARPORT_FLAG_EXCL;
+	walkera0701_parport_cb.irq_func = walkera0701_irq_handler;
+	walkera0701_parport_cb.private = w;
+
+	w->pardevice = parport_register_dev_model(pp, "walkera0701",
+						  &walkera0701_parport_cb, 0);
+
 	if (!w->pardevice) {
 		pr_err("failed to register parport device\n");
-		error = -EIO;
-		goto err_put_parport;
+		return;
 	}
 
 	if (parport_negotiate(w->pardevice->port, IEEE1284_MODE_COMPAT)) {
 		pr_err("failed to negotiate parport mode\n");
-		error = -EIO;
 		goto err_unregister_device;
 	}
 

@@ -238,7 +241,6 @@ static int walkera0701_connect(struct walkera_dev *w, int parport)
 	w->input_dev = input_allocate_device();
 	if (!w->input_dev) {
 		pr_err("failed to allocate input device\n");
-		error = -ENOMEM;
 		goto err_unregister_device;
 	}
 

@@ -265,38 +267,46 @@ static int walkera0701_connect(struct walkera_dev *w, int parport)
 	input_set_abs_params(w->input_dev, ABS_RUDDER, -512, 512, 0, 0);
 	input_set_abs_params(w->input_dev, ABS_MISC, -512, 512, 0, 0);
 
-	error = input_register_device(w->input_dev);
-	if (error) {
+	if (input_register_device(w->input_dev)) {
 		pr_err("failed to register input device\n");
 		goto err_free_input_dev;
 	}
 
-	return 0;
+	return;
 
 err_free_input_dev:
 	input_free_device(w->input_dev);
 err_unregister_device:
 	parport_unregister_device(w->pardevice);
-err_put_parport:
-	parport_put_port(w->parport);
-	return error;
 }
 
-static void walkera0701_disconnect(struct walkera_dev *w)
+static void walkera0701_detach(struct parport *port)
 {
+	struct walkera_dev *w = &w_dev;
+
+	if (!w->pardevice || w->parport->number != port->number)
+		return;
+
 	input_unregister_device(w->input_dev);
 	parport_unregister_device(w->pardevice);
-	parport_put_port(w->parport);
+	w->parport = NULL;
 }
 
+static struct parport_driver walkera0701_parport_driver = {
+	.name = "walkera0701",
+	.match_port = walkera0701_attach,
+	.detach = walkera0701_detach,
+	.devmodel = true,
+};
+
 static int __init walkera0701_init(void)
 {
-	return walkera0701_connect(&w_dev, walkera0701_pp_no);
+	return parport_register_driver(&walkera0701_parport_driver);
 }
 
 static void __exit walkera0701_exit(void)
 {
-	walkera0701_disconnect(&w_dev);
+	parport_unregister_driver(&walkera0701_parport_driver);
 }
 
 module_init(walkera0701_init);

@@ -141,19 +141,15 @@ static void parkbd_interrupt(void *dev_id)
 	parkbd_last = jiffies;
 }
 
-static int parkbd_getport(void)
+static int parkbd_getport(struct parport *pp)
 {
-	struct parport *pp;
+	struct pardev_cb parkbd_parport_cb;
 
-	pp = parport_find_number(parkbd_pp_no);
+	parkbd_parport_cb.irq_func = parkbd_interrupt;
+	parkbd_parport_cb.flags = PARPORT_FLAG_EXCL;
 
-	if (pp == NULL) {
-		printk(KERN_ERR "parkbd: no such parport\n");
-		return -ENODEV;
-	}
-
-	parkbd_dev = parport_register_device(pp, "parkbd", NULL, NULL, parkbd_interrupt, PARPORT_DEV_EXCL, NULL);
-	parport_put_port(pp);
+	parkbd_dev = parport_register_dev_model(pp, "parkbd",
+						&parkbd_parport_cb, 0);
 
 	if (!parkbd_dev)
 		return -ENODEV;

@@ -183,19 +179,21 @@ static struct serio * __init parkbd_allocate_serio(void)
 	return serio;
 }
 
-static int __init parkbd_init(void)
+static void parkbd_attach(struct parport *pp)
 {
-	int err;
+	if (pp->number != parkbd_pp_no) {
+		pr_debug("Not using parport%d.\n", pp->number);
+		return;
+	}
 
-	err = parkbd_getport();
-	if (err)
-		return err;
+	if (parkbd_getport(pp))
+		return;
 
 	parkbd_port = parkbd_allocate_serio();
 	if (!parkbd_port) {
 		parport_release(parkbd_dev);
 		parport_unregister_device(parkbd_dev);
-		return -ENOMEM;
+		return;
 	}
 
 	parkbd_writelines(3);

@@ -205,14 +203,35 @@ static int __init parkbd_init(void)
 	printk(KERN_INFO "serio: PARKBD %s adapter on %s\n",
                         parkbd_mode ? "AT" : "XT", parkbd_dev->port->name);
 
-	return 0;
+	return;
 }
 
-static void __exit parkbd_exit(void)
+static void parkbd_detach(struct parport *port)
 {
+	if (!parkbd_port || port->number != parkbd_pp_no)
+		return;
+
 	parport_release(parkbd_dev);
 	serio_unregister_port(parkbd_port);
 	parport_unregister_device(parkbd_dev);
+	parkbd_port = NULL;
+}
+
+static struct parport_driver parkbd_parport_driver = {
+	.name = "parkbd",
+	.match_port = parkbd_attach,
+	.detach = parkbd_detach,
+	.devmodel = true,
+};
+
+static int __init parkbd_init(void)
+{
+	return parport_register_driver(&parkbd_parport_driver);
+}
+
+static void __exit parkbd_exit(void)
+{
+	parport_unregister_driver(&parkbd_parport_driver);
 }
 
 module_init(parkbd_init);

@@ -49,7 +49,7 @@ struct tgfx_config {
 	unsigned int nargs;
 };
 
-static struct tgfx_config tgfx_cfg[TGFX_MAX_PORTS] __initdata;
+static struct tgfx_config tgfx_cfg[TGFX_MAX_PORTS];
 
 module_param_array_named(map, tgfx_cfg[0].args, int, &tgfx_cfg[0].nargs, 0);
 MODULE_PARM_DESC(map, "Describes first set of devices (<parport#>,<js1>,<js2>,..<js7>");

@@ -81,6 +81,7 @@ static struct tgfx {
 	char phys[TGFX_MAX_DEVICES][32];
 	int sticks;
 	int used;
+	int parportno;
 	struct mutex sem;
 } *tgfx_base[TGFX_MAX_PORTS];
 

@@ -156,38 +157,46 @@ static void tgfx_close(struct input_dev *dev)
  * tgfx_probe() probes for tg gamepads.
  */
 
-static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs)
+static void tgfx_attach(struct parport *pp)
 {
 	struct tgfx *tgfx;
 	struct input_dev *input_dev;
-	struct parport *pp;
 	struct pardevice *pd;
 	int i, j;
-	int err;
+	int *n_buttons, n_devs;
+	struct pardev_cb tgfx_parport_cb;
+
+	for (i = 0; i < TGFX_MAX_PORTS; i++) {
+		if (tgfx_cfg[i].nargs == 0 || tgfx_cfg[i].args[0] < 0)
+			continue;
+		if (tgfx_cfg[i].args[0] == pp->number)
+			break;
+	}
 
-	pp = parport_find_number(parport);
-	if (!pp) {
-		printk(KERN_ERR "turbografx.c: no such parport\n");
-		err = -EINVAL;
-		goto err_out;
+	if (i == TGFX_MAX_PORTS) {
+		pr_debug("Not using parport%d.\n", pp->number);
+		return;
 	}
+	n_buttons = tgfx_cfg[i].args + 1;
+	n_devs = tgfx_cfg[i].nargs - 1;
 
-	pd = parport_register_device(pp, "turbografx", NULL, NULL, NULL, PARPORT_DEV_EXCL, NULL);
+	tgfx_parport_cb.flags = PARPORT_FLAG_EXCL;
+
+	pd = parport_register_dev_model(pp, "turbografx", &tgfx_parport_cb, i);
 	if (!pd) {
-		printk(KERN_ERR "turbografx.c: parport busy already - lp.o loaded?\n");
-		err = -EBUSY;
-		goto err_put_pp;
+		pr_err("parport busy already - lp.o loaded?\n");
+		return;
 	}
 
 	tgfx = kzalloc(sizeof(struct tgfx), GFP_KERNEL);
 	if (!tgfx) {
 		printk(KERN_ERR "turbografx.c: Not enough memory\n");
-		err = -ENOMEM;
 		goto err_unreg_pardev;
 	}
 
 	mutex_init(&tgfx->sem);
 	tgfx->pd = pd;
+	tgfx->parportno = pp->number;
 	init_timer(&tgfx->timer);
 	tgfx->timer.data = (long) tgfx;
 	tgfx->timer.function = tgfx_timer;

@@ -198,14 +207,12 @@ static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs)
 
 		if (n_buttons[i] > ARRAY_SIZE(tgfx_buttons)) {
 			printk(KERN_ERR "turbografx.c: Invalid number of buttons %d\n", n_buttons[i]);
-			err = -EINVAL;
 			goto err_unreg_devs;
 		}
 
 		tgfx->dev[i] = input_dev = input_allocate_device();
 		if (!input_dev) {
 			printk(KERN_ERR "turbografx.c: Not enough memory for input device\n");
-			err = -ENOMEM;
 			goto err_unreg_devs;
 		}
 

@@ -234,19 +241,17 @@ static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs)
 		for (j = 0; j < n_buttons[i]; j++)
 			set_bit(tgfx_buttons[j], input_dev->keybit);
 
-		err = input_register_device(tgfx->dev[i]);
-		if (err)
+		if (input_register_device(tgfx->dev[i]))
 			goto err_free_dev;
 	}
 
         if (!tgfx->sticks) {
 		printk(KERN_ERR "turbografx.c: No valid devices specified\n");
-		err = -EINVAL;
 		goto err_free_tgfx;
         }
 
-	parport_put_port(pp);
-	return tgfx;
+	tgfx_base[i] = tgfx;
+	return;
 
  err_free_dev:
 	input_free_device(tgfx->dev[i]);

@@ -258,15 +263,23 @@ static struct tgfx __init *tgfx_probe(int parport, int *n_buttons, int n_devs)
 	kfree(tgfx);
  err_unreg_pardev:
 	parport_unregister_device(pd);
- err_put_pp:
-	parport_put_port(pp);
- err_out:
-	return ERR_PTR(err);
 }
 
-static void tgfx_remove(struct tgfx *tgfx)
+static void tgfx_detach(struct parport *port)
 {
 	int i;
+	struct tgfx *tgfx;
+
+	for (i = 0; i < TGFX_MAX_PORTS; i++) {
+		if (tgfx_base[i] && tgfx_base[i]->parportno == port->number)
+			break;
+	}
+
+	if (i == TGFX_MAX_PORTS)
+		return;
+
+	tgfx = tgfx_base[i];
+	tgfx_base[i] = NULL;
 
 	for (i = 0; i < TGFX_MAX_DEVICES; i++)
 		if (tgfx->dev[i])

@@ -275,11 +288,17 @@ static void tgfx_remove(struct tgfx *tgfx)
 	kfree(tgfx);
 }
 
+static struct parport_driver tgfx_parport_driver = {
+	.name = "turbografx",
+	.match_port = tgfx_attach,
+	.detach = tgfx_detach,
+	.devmodel = true,
+};
+
 static int __init tgfx_init(void)
 {
 	int i;
 	int have_dev = 0;
-	int err = 0;
 
 	for (i = 0; i < TGFX_MAX_PORTS; i++) {
 		if (tgfx_cfg[i].nargs == 0 || tgfx_cfg[i].args[0] < 0)

@@ -287,38 +306,21 @@ static int __init tgfx_init(void)
 
 		if (tgfx_cfg[i].nargs < 2) {
 			printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n");
-			err = -EINVAL;
-			break;
-		}
-
-		tgfx_base[i] = tgfx_probe(tgfx_cfg[i].args[0],
-					  tgfx_cfg[i].args + 1,
-					  tgfx_cfg[i].nargs - 1);
-		if (IS_ERR(tgfx_base[i])) {
-			err = PTR_ERR(tgfx_base[i]);
-			break;
+			return -EINVAL;
 		}
 
 		have_dev = 1;
 	}
 
-	if (err) {
-		while (--i >= 0)
-			if (tgfx_base[i])
-				tgfx_remove(tgfx_base[i]);
-		return err;
-	}
+	if (!have_dev)
+		return -ENODEV;
 
-	return have_dev ? 0 : -ENODEV;
+	return parport_register_driver(&tgfx_parport_driver);
 }
 
 static void __exit tgfx_exit(void)
 {
-	int i;
-
-	for (i = 0; i < TGFX_MAX_PORTS; i++)
-		if (tgfx_base[i])
-			tgfx_remove(tgfx_base[i]);
+	parport_unregister_driver(&tgfx_parport_driver);
 }
 
 module_init(tgfx_init);