[PATCH v3] input: pwm-beeper: Add devicetree probing support

Subsystems: input (keyboard, mouse, joystick, touchscreen) drivers, open firmware and flattened device tree bindings, the rest

STALE5023d

4 messages, 3 authors, 2012-11-03 · open the first message on its own page

[PATCH v3] input: pwm-beeper: Add devicetree probing support

From: Sascha Hauer <s.hauer@pengutronix.de>
Date: 2012-11-02 08:44:07

A very simple binding, the only property is the phandle to the PWM.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---

changes since v2:

- protect of match table with #ifdef CONFIG_OF

changes since v1:

- first use new pwm API, if that fails, use legacy API
- add 'depends on PWM'

 Documentation/devicetree/bindings/input/pwm-beeper.txt |    7 +++++++
 drivers/input/misc/Kconfig                             |    2 +-
 drivers/input/misc/pwm-beeper.c                        |   14 +++++++++++++-
 3 files changed, 21 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/pwm-beeper.txt
diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
new file mode 100644
index 0000000..7388b82
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
@@ -0,0 +1,7 @@
+* PWM beeper device tree bindings
+
+Registers a PWM device as beeper.
+
+Required properties:
+- compatible: should be "pwm-beeper"
+- pwms: phandle to the physical pwm device
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7c0f1ec..ff5dbd6 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -444,7 +444,7 @@ config INPUT_PCF8574
 
 config INPUT_PWM_BEEPER
 	tristate "PWM beeper support"
-	depends on HAVE_PWM
+	depends on HAVE_PWM || PWM
 	help
 	  Say Y here to get support for PWM based beeper devices.
 
diff --git a/drivers/input/misc/pwm-beeper.c b/drivers/input/misc/pwm-beeper.c
index fc84c8a..e95a7c8 100644
--- a/drivers/input/misc/pwm-beeper.c
+++ b/drivers/input/misc/pwm-beeper.c
@@ -75,7 +75,11 @@ static int __devinit pwm_beeper_probe(struct platform_device *pdev)
 	if (!beeper)
 		return -ENOMEM;
 
-	beeper->pwm = pwm_request(pwm_id, "pwm beeper");
+	beeper->pwm = pwm_get(&pdev->dev, NULL);
+	if (IS_ERR(beeper->pwm)) {
+		dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n");
+		beeper->pwm = pwm_request(pwm_id, "pwm beeper");
+	}
 
 	if (IS_ERR(beeper->pwm)) {
 		error = PTR_ERR(beeper->pwm);
@@ -171,6 +175,13 @@ static SIMPLE_DEV_PM_OPS(pwm_beeper_pm_ops,
 #define PWM_BEEPER_PM_OPS NULL
 #endif
 
+#ifdef CONFIG_OF
+static const struct of_device_id pwm_beeper_match[] = {
+	{ .compatible = "pwm-beeper", },
+	{ },
+};
+#endif
+
 static struct platform_driver pwm_beeper_driver = {
 	.probe	= pwm_beeper_probe,
 	.remove = __devexit_p(pwm_beeper_remove),
@@ -178,6 +189,7 @@ static struct platform_driver pwm_beeper_driver = {
 		.name	= "pwm-beeper",
 		.owner	= THIS_MODULE,
 		.pm	= PWM_BEEPER_PM_OPS,
+		.of_match_table = of_match_ptr(pwm_beeper_match),
 	},
 };
 module_platform_driver(pwm_beeper_driver);
-- 
1.7.10.4

Re: [PATCH v3] input: pwm-beeper: Add devicetree probing support

From: Thierry Reding <hidden>
Date: 2012-11-02 09:10:21

On Fri, Nov 02, 2012 at 09:44:02AM +0100, Sascha Hauer wrote:
quoted hunk
A very simple binding, the only property is the phandle to the PWM.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---

changes since v2:

- protect of match table with #ifdef CONFIG_OF

changes since v1:

- first use new pwm API, if that fails, use legacy API
- add 'depends on PWM'

 Documentation/devicetree/bindings/input/pwm-beeper.txt |    7 +++++++
 drivers/input/misc/Kconfig                             |    2 +-
 drivers/input/misc/pwm-beeper.c                        |   14 +++++++++++++-
 3 files changed, 21 insertions(+), 2 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/input/pwm-beeper.txt
diff --git a/Documentation/devicetree/bindings/input/pwm-beeper.txt b/Documentation/devicetree/bindings/input/pwm-beeper.txt
new file mode 100644
index 0000000..7388b82
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/pwm-beeper.txt
@@ -0,0 +1,7 @@
+* PWM beeper device tree bindings
+
+Registers a PWM device as beeper.
+
+Required properties:
+- compatible: should be "pwm-beeper"
+- pwms: phandle to the physical pwm device
I'd like to see this rewritten as "physical PWM device", but other than
that:

Reviewed-by: Thierry Reding <redacted>

Re: [PATCH v3] input: pwm-beeper: Add devicetree probing support

From: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Date: 2012-11-03 19:03:07

Hi Sascha.

On Fri, Nov 02, 2012 at 09:44:02AM +0100, Sascha Hauer wrote:
 
-	beeper->pwm = pwm_request(pwm_id, "pwm beeper");
+	beeper->pwm = pwm_get(&pdev->dev, NULL);
+	if (IS_ERR(beeper->pwm)) {
+		dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n");
This is not an error, I'll switch it over to dev_dbg().

Thanks.

-- 
Dmitry

Re: [PATCH v3] input: pwm-beeper: Add devicetree probing support

From: Sascha Hauer <s.hauer@pengutronix.de>
Date: 2012-11-03 21:34:07

Hi Dmitry,

On Sat, Nov 03, 2012 at 12:03:01PM -0700, Dmitry Torokhov wrote:
Hi Sascha.

On Fri, Nov 02, 2012 at 09:44:02AM +0100, Sascha Hauer wrote:
quoted
 
-	beeper->pwm = pwm_request(pwm_id, "pwm beeper");
+	beeper->pwm = pwm_get(&pdev->dev, NULL);
+	if (IS_ERR(beeper->pwm)) {
+		dev_err(&pdev->dev, "unable to request PWM, trying legacy API\n");
This is not an error, I'll switch it over to dev_dbg().
This is cut and paste from some other driver. I suppose it's dev_err to
motivate people to update their boards. Anyway, dev_dbg is fine with me.

Thanks,
 Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help