Hello,
According instructions of Joseph Salisbury at
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/916319
I send this patch, in order to include into ubuntu kernel,
Credits to: eran, http://thread.gmane.org/gmane.linux.bluez.kernel/18801
Changelog: Bluetooth: Adding USB device 13d3:3375 as an Atheros AR3012.
Description:
The bluetooth module in the Asus UX31/UX21 is based on Atheros AR3012
and requires a firmware to be uploaded before it's usable.
output of usb-devices for this module:
T: Bus=01 Lev=02 Prnt=02 Port=07 Cnt=03 Dev#= 6 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3375 Rev=00.02
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: Diego Carrera diegocarrera2000@gmail.com
------------
Please, tell me if everything is ok
Thanks so much
Diego
Hi Diego,
According instructions of Joseph Salisbury at
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/916319
I send this patch, in order to include into ubuntu kernel,
Credits to: eran, http://thread.gmane.org/gmane.linux.bluez.kernel/18801
Changelog: Bluetooth: Adding USB device 13d3:3375 as an Atheros AR3012.
Description:
You sent your request to the linux input subsystem, which (usually)
does not handle bluetooth patches. I have added the correct maintainer
to CC here.
It seems the patch you refer to is already on-route to the mainline
kernel, although it has yet to appear in linux-next. Thus, nothing
more should need to be done but wait.
Once the patch is available upstream, if you want the attention of the
ubuntu kernel developers, try sending a mail to their list
(kernel-team@lists.ubuntu.com), asking for a cherry-pick. Make sure to
motivate the pick properly. :-)
The bluetooth module in the Asus UX31/UX21 is based on Atheros AR3012
and requires a firmware to be uploaded before it's usable.
output of usb-devices for this module:
T: Bus=01 Lev=02 Prnt=02 Port=07 Cnt=03 Dev#= 6 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=13d3 ProdID=3375 Rev=00.02
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
Signed-off-by: Diego Carrera diegocarrera2000@gmail.com
------------
Please, tell me if everything is ok
Thanks so much
Diego
quoted hunk
diff -ur linux-3.2.5.orig/drivers/bluetooth/ath3k.c linux-3.2.5/drivers/bluetooth/ath3k.c
--- linux-3.2.5.orig/drivers/bluetooth/ath3k.c 2012-02-06 18:47:00.000000000 +0100
+++ linux-3.2.5/drivers/bluetooth/ath3k.c 2012-02-07 15:09:33.918295301 +0100
@@ -70,6 +70,7 @@
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3004) },
+ { USB_DEVICE(0x13d3, 0x3375) },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xE02C) },@@ -86,6 +87,7 @@
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ } /* Terminating entry */
};diff -ur linux-3.2.5.orig/drivers/bluetooth/btusb.c linux-3.2.5/drivers/bluetooth/btusb.c
--- linux-3.2.5.orig/drivers/bluetooth/btusb.c 2012-02-06 18:47:00.000000000 +0100
+++ linux-3.2.5/drivers/bluetooth/btusb.c 2012-02-07 15:09:33.918295301 +0100
@@ -125,6 +125,7 @@
/* Atheros 3012 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
/* Atheros AR5BBU12 with sflash firmware */
{ USB_DEVICE(0x0489, 0xe02c), .driver_info = BTUSB_IGNORE },
Thanks,
Henrik