usb touch screen of Mimo 720 has x,y rotated 180 degrees

I just got a Mimo 720 usb-only touchscreen. using module
"usbtouchscreen"
The x and y are rotated 180 deg.

While I initially thought the touch device used by usbtouchscreen.c was 
17e9:401a, it turns out it is is 1ac7:0001, which matches it's controller, but
is a problem as this may be the only model where x any y are 180 deg off.

The module has an option to rotate 90 deg, and with a 180 deg rotation parameter
we could support all possible rotations from mis-installations (if that is what this is).

Would it make sense to add a parameter to flip a usbtouchscreen 180 deg, and if so,
should that setting apply to every (or most) displays in the module, or just
this one where there is a backwards implamentations?
I see that some touchscreens already invert one or both of their axis' from the input.

Inc. patch that inverts _all_ e2i touchscreens. I came across this on 3.2.2

computer information: https://bugzilla.kernel.org/show_bug.cgi?id=42743