# Re: \[RFC PATCH\] Only process ABS\_MT\_SLOT where there are slots available

- From: Dmitry Torokhov \<dmitry.torokhov@gmail.com\>
- Date: 2011-09-09 20:54:37 
- List: linux-input
- Page: https://ratatoskr.run/linux-input/2011/09/8917693
- Thread: https://ratatoskr.run/linux-input/2011/08/8917519/t.md

```text
Hi Antonio,

On Thu, Aug 18, 2011 at 12:28:53PM +0200, Antonio Ospite wrote:
> This fixes the case when a non-multitouch device happens to have a HID
> code equal to ABS_MT_SLOT, like the Sony Sixaxis has for the left dpad
> analog control.
> 
> Signed-off-by: Antonio Ospite <redacted>
> Cc: Simon Wood <redacted>
> Cc: Henrik Rydberg <redacted>
> Cc: <redacted>
> ---
> 
> Hi,
> 
> following up from the discussion at 
> http://thread.gmane.org/gmane.linux.kernel.input/19632 I've come up with this 
> workaround to make the dpad left analog axis of the Sony Sixaxis controller 
> working. What happens is that this button has a code of 0x2f (ABS_MT_SLOT) 
> which gets some special handling regardless of the device being a multitouch one 
> or not.
> 
> I do not know anything about multitouch devices, so I am not sure if this 
> hack may break something else, I'd like some advice here.
> 
> Another possibility could be to remap the code at the HID level for the 
> Sixaxis only, Simon you suggested this, are you willing to do that if this 
> will be the preferred way? My HID-fu is way worse than yours and It'll take a 
> lot more time for me.

No, drivers should not be emitting ABS_MT_SLOT if they are not
multitouch devices and not using MT-B protocol. You'll have to remap the
axis into something more suitable.

Thanks,
Dmitry

-- 
Dmitry
```
