# RE: Question: I2C touchscreen controller

- From: H Hartley Sweeten \<hidden\>
- Date: 2011-08-26 17:06:36 
- List: linux-input
- Page: https://ratatoskr.run/linux-input/2011/08/8917599
- Thread: https://ratatoskr.run/linux-input/2011/08/8917578/t.md

```text
On Thursday, August 25, 2011 12:23 AM, Henrik Rydberg wrote:
>> It looks like these are the current I2C touchscreen drivers in mainline:
>> 
>> CONFIG_TOUCHSCREEN_88PM860X		pmic mfd device? probably not standalone
>> CONFIG_TOUCHSCREEN_AD7879_I2C		datasheet looks simple enough
>> CONFIG_TOUCHSCREEN_ATMEL_MXT		needs firmware? probably complicated
>> CONFIG_TOUCHSCREEN_BU21013			can't find a datasheet
>> CONFIG_TOUCHSCREEN_CY8CTMG110		looks like the chip may be obsolete
>> CONFIG_TOUCHSCREEN_MAX11801		Maxim usually has long lead times
>> CONFIG_TOUCHSCREEN_MCS5000			can't find a datasheet
>> CONFIG_TOUCHSCREEN_STMPE			datasheet looks simple enough
>> CONFIG_TOUCHSCREEN_TSC2007			datasheet looks simple enough
>> 
>> Based on that I'm considering the Analog Devices, STMicro, and TI parts.
>> 
>> Do you know if any of these work better than the others?
>
> Out of those, bu21013 (and st1232 not on your list) are dual touch,
> and atmel_mxt is true multitouch. The rest are single touch.

Henrik,

Thanks for the info and pointing out the st1232 driver.  Do you know
of a link to a datasheet for it?

So, is the dual/muti-touch feature just a function of the controller?
Or do you need a touchscreen that actually supports it?

My product is currently using a 5.7" color TFT-LCD from OSD Displays.
They have a version with a built in 4 wire resistance type touchscreen
(p/n OSD057VA01CT).  I haven't used a touchscreen before so I don't
know any of the details on how they work, but with the 4 wire interface
(YU, XR, YD, XL) I don't see how you could read more than one touch.

Thanks for any information.

Regards,
Hartley
```
