[PATCH 3/3] omap3evm: Configure GPIO175 for touchscreen PEN_IRQ
flat view
STALE6089d
From: Sanjeev Premi <hidden>
Date: 2010-02-05 08:44:12
Also in:
linux-omap
Subsystem:
arm port, omap2+ support, the rest · Maintainers:
Russell King, Aaro Koskinen, Andreas Kemnade, Kevin Hilman, Roger Quadros, Tony Lindgren, Linus Torvalds
GPIO175 is used for PEN_IRQ on the EVM. This patch sets the mux settings for the same. Signed-off-by: Sanjeev Premi <redacted> --- arch/arm/mach-omap2/board-omap3evm.c | 4 +++- 1 files changed, 3 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index c8e1208..00bfe9b 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c@@ -430,7 +430,9 @@ static struct omap_board_mux board_mux[] __initdata = { OMAP3_MUX(SYS_NIRQ, OMAP_MUX_MODE0 | OMAP_PIN_INPUT_PULLUP | OMAP_PIN_OFF_INPUT_PULLUP | OMAP_PIN_OFF_WAKEUPENABLE), - + OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP | + OMAP_PIN_OFF_INPUT_PULLUP | + OMAP_PIN_OFF_WAKEUPENABLE), { .reg_offset = OMAP_MUX_TERMINATOR }, }; #else
--
1.6.2.2