Hi,
I'm working to create a fixup driver for the Saitek Cyborg Mouse
(http://www.saitek.com/UK/prod/cyborgmouse.htm) device.
So far I'm almost done with it, but I have a problem with the
"trademark" feature of the Cyborg line... the 3 mode switch.
I hardcoded the keys/buttons as follows:
a. For all the modes, the buttons 1,2,3, the wheel axis and the X/Y
axis are defaults
b. The buttons 4,5,6 and the D-Pad (another 4 buttons) have this mapping:
static unsigned red_code[]= {BTN_0, BTN_1, BTN_2, BTN_3, BTN_4, BTN_5, BTN_6};
static unsigned green_code[] = {BTN_BACK, BTN_FORWARD, BTN_SIDE,
BTN_0, BTN_1, BTN_2, BTN_3};
static unsigned yellow_code[] = {BTN_BACK, BTN_FORWARD, BTN_SIDE,
KEY_UP, KEY_RIGHT, KEY_DOWN, KEY_LEFT};
My problem is how to expose these to the user. What is the
common/linux/whatever standard way to do this? IOCTL? sysfs?
I'm also working to get the Cyborg Command Unit
(http://www.saitek.com/UK/prod/cyborgcommand.htm) and the X52 Joystick
(http://www.saitek.com/UK/prod/x52.htm) working with modal switch.
Thanks,
Bogdan.