# Re: usb mouse not responding after resume

- From: Alan Stern \<stern@rowland.harvard.edu\>
- Date: 2009-07-10 20:33:03 
- List: linux-input
- Page: https://ratatoskr.run/linux-input/2009/07/1276262
- Thread: https://ratatoskr.run/linux-input/2009/07/1276262/t.md

```text
On Fri, 10 Jul 2009, K R I S K wrote:

> Thanks Allan.
> 
> We need to look into the console messages of the bootloader rather than
> dmesg's.

What bootloader?  What's the connection between booting and 
suspend/resume?

> the second USB - mouse may not be resumed or initialized
> 
> solution one:
> 
> The resistor value may have to be changed ; for example in PPC the following
> resistor values would release the reset to PPC
> 1. No install R670
> 2. Install R776

We're talking about a T60 notebook.  It doesn't use a PPC.

> Second Solution:
> 
> The USB devices can be re-initialized after suspend or when resuming
> by issuing the following sequence of commands: USB_STOP(),
> DELAY(),USB_INIT()
> in the bootloader's board specific file with in conditional High speed and
> Lowspeed flags for USB.

What bootloader?  What board-specific file?

Besides, it won't help.  The log shows that the kernel did reset the 
USB controller.

Alan Stern

```
