# Re: \[rft\]suspend/resume support for yealink

- From: Oliver Neukum \<oliver@neukum.org\>
- Date: 2008-07-01 06:03:57 
- List: linux-input
- Page: https://ratatoskr.run/linux-input/2008/07/8909985
- Thread: https://ratatoskr.run/linux-input/2008/06/8909982/t.md

```text
Am Montag 30 Juni 2008 23:47:08 schrieb Thomas Reitmayr:
> Hi Oliver,
> I tested the suspend/resume support with my Yealink USB-P1K doing the
> following:
> 
> * Suspend to RAM:
>   The device suspends properly, I hear the audio subsystem turning off
> while the display keeps its current state.
>   Apparently the USB root hub gets reset during suspend/resume according
> to the kernel log. Then after resume the input events are generated
> again and the display can be updated. I noticed however that the display
> is reset to its default text, possibly because of the USB reset? Anyway,
> I appended a filtered kernel log about this scenario below.

Yes, the reset triggers a disconnect because the driver doesn't implement
reset_resume().

> * Suspend the device by "echo suspend > power/level"
>   Works too with the difference that the display is not modified during
> resume.

OK, it works. Thank you for testing.

	Regards
		Oliver
```
