[PATCH 6/6] pata_radisys: fix checking of DMA state
From: Reimar Döffinger <hidden>
Date: 2021-10-03 11:29:25
Subsystem:
libata subsystem (serial and parallel ata drivers), the rest · Maintainers:
Damien Le Moal, Niklas Cassel, Linus Torvalds
Checking if DMA is enabled should be done via the ata_dma_enabled helper function, since the init state 0xff indicates disabled. Change based on code review, not tested due to lack of hardware. Signed-off-by: Reimar Döffinger <redacted> --- drivers/ata/pata_radisys.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/ata/pata_radisys.c b/drivers/ata/pata_radisys.c
index 8fde4a86401b..3aca8fe3fdb6 100644
--- a/drivers/ata/pata_radisys.c
+++ b/drivers/ata/pata_radisys.c@@ -172,8 +172,8 @@ static unsigned int radisys_qc_issue(struct ata_queued_cmd *qc) if (adev != ap->private_data) { /* UDMA timing is not shared */ - if (adev->dma_mode < XFER_UDMA_0) { - if (adev->dma_mode) + if (adev->dma_mode < XFER_UDMA_0 || !ata_dma_enabled(adev)) { + if (ata_dma_enabled(adev)) radisys_set_dmamode(ap, adev); else if (adev->pio_mode) radisys_set_piomode(ap, adev);
--
2.33.0