On Sun, 2005-08-28 at 17:33 +0400, Yuri Kirsanov wrote:

Good day. I've tried latest kernel 2.6.13-rc7, TX4000 support seems to
be in sata_promise already. After startup I see following in dmesg:

libata version 1.12 loaded.
sata_promise version 1.02
PCI: Found IRQ 5 for device 0000:01:09.0
ata1: PATA max UDMA/133 cmd 0xCC81C200 ctl 0xCC81C238 bmdma 0x0 irq 5
ata2: PATA max UDMA/133 cmd 0xCC81C280 ctl 0xCC81C2B8 bmdma 0x0 irq 5
ata3: PATA max UDMA/133 cmd 0xCC81C300 ctl 0xCC81C338 bmdma 0x0 irq 5
ata4: PATA max UDMA/133 cmd 0xCC81C380 ctl 0xCC81C3B8 bmdma 0x0 irq 5
ata1: no device found (phy stat 00000000)
scsi0 : sata_promise
ata2: no device found (phy stat 00000000)
scsi1 : sata_promise
ata3: no device found (phy stat 00000000)
scsi2 : sata_promise
ata4: no device found (phy stat 00000000)
scsi3 : sata_promise


Anybody has any ideas? As I can see, my TX4000 is found by
sata_promise, it even detects it's UDMA modes, but it still can't find
any of my hard drives, while TX4000 BIOS shows all of them ok.

Maybe you have to enable PATA support in include/libata.h?