[PATCH] add default ARM/ARM26 IDE host driver

@@ -0,0 +1,43 @@
+/*
+ * ARM/ARM26 default IDE host driver
+ *
+ * Copyright (C) 2004 Bartlomiej Zolnierkiewicz
+ * Based on code by: Russell King, Ian Molton and Alexander Schulz.
+ *
+ * May be copied or modified under the terms of the GNU General Public License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ide.h>
+
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#ifdef CONFIG_ARM26
+# define IDE_ARM_HOST	(machine_is_a5k())
+#else
+# define IDE_ARM_HOST	(1)
+#endif
+
+#ifdef CONFIG_ARCH_CLPS7500
+# include <asm/arch/hardware.h>
+#
+# define IDE_ARM_IO	(ISASLOT_IO + 0x1f0)
+# define IDE_ARM_IRQ	IRQ_ISA_14
+#else
+# define IDE_ARM_IO	0x1f0
+# define IDE_ARM_IRQ	IRQ_HARDDISK
+#endif
+
+void __init ide_arm_init(void)
+{
+	if (IDE_ARM_HOST) {
+		hw_regs_t hw;
+
+		memset(&hw, 0, sizeof(hw));
+		ide_std_init_ports(&hw, IDE_ARM_IO, IDE_ARM_IO + 0x206);
+		hw.irq = IDE_ARM_IRQ;
+		ide_register_hw(&hw, NULL);
+	}
+}

@@ -272,6 +272,8 @@ static void init_hwif_default(ide_hwif_t
 #endif
 }
 
+extern void ide_arm_init(void);
+
 /*
  * init_ide_data() sets reasonable default values into all fields
  * of all instances of the hwifs and drives, but only on the first call.

@@ -320,6 +322,9 @@ static void __init init_ide_data (void)
 	ide_init_default_hwifs();
 	initializing = 0;
 #endif
+#ifdef CONFIG_IDE_ARM
+	ide_arm_init();
+#endif
 }
 
 /*

@@ -855,6 +855,9 @@ config BLK_DEV_IDE_SWARM
 	bool "SWARM onboard IDE support"
 	depends on SIBYTE_SWARM
 
+config IDE_ARM
+	def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
+
 config BLK_DEV_IDE_ICSIDE
 	tristate "ICS IDE interface support"
 	depends on ARM && ARCH_ACORN

@@ -25,6 +25,9 @@ ide-core-$(CONFIG_BLK_DEV_IDE_TCQ)	+= id
 ide-core-$(CONFIG_PROC_FS)		+= ide-proc.o
 ide-core-$(CONFIG_BLK_DEV_IDEPNP)	+= ide-pnp.o
 
+# built-in only drivers from arm/
+ide-core-$(CONFIG_IDE_ARM)		+= arm/ide_arm.o
+
 # built-in only drivers from legacy/
 ide-core-$(CONFIG_BLK_DEV_IDE_PC9800)	+= legacy/pc9800.o
 ide-core-$(CONFIG_BLK_DEV_BUDDHA)	+= legacy/buddha.o

@@ -47,23 +47,7 @@ static inline void ide_init_hwif_ports(h
 
 #define ide_init_default_irq(base)	(0)
 
-/*
- * This registers the standard ports for this architecture with the IDE
- * driver.
- */
-static __inline__ void ide_init_default_hwifs(void)
-{
-        if (machine_is_a5k()) {
-                hw_regs_t hw;
-
-                memset(&hw, 0, sizeof(hw));
-
-                ide_init_hwif_ports(&hw, 0x1f0, 0x3f6, NULL);
-                hw.irq = IRQ_HARDDISK;
-                ide_register_hw(&hw,NULL);
-        }
-}
-
+static inline void ide_init_default_hwifs(void) { ; }
 
 /*
  * We always use the new IDE port registering,

@@ -6,8 +6,6 @@
  * Modifications:
  *  29-07-1998	RMK	Major re-work of IDE architecture specific code
  */
-#include <asm/irq.h>
-#include <asm/arch/hardware.h>
 
 /*
  * Set up a hw structure for a specified data port, control port and IRQ.

@@ -35,16 +33,4 @@ static inline void ide_init_hwif_ports(h
 	hw->io_ports[IDE_IRQ_OFFSET] = 0;
 }
 
-/*
- * This registers the standard ports for this architecture with the IDE
- * driver.
- */
-static __inline__ void
-ide_init_default_hwifs(void)
-{
-	hw_regs_t hw;
-
-	ide_init_hwif_ports(&hw, ISASLOT_IO + 0x1f0, ISASLOT_IO + 0x3f6, NULL);
-	hw.irq = IRQ_ISA_14;
-	ide_register_hw(&hw);
-}
+static inline void ide_init_default_hwifs(void) { ; }

@@ -10,7 +10,6 @@
  *  Modifications:
  *   29-07-1998	RMK	Major re-work of IDE architecture specific code
  */
-#include <asm/irq.h>
 
 /*
  * Set up a hw structure for a specified data port, control port and IRQ.

@@ -33,16 +32,4 @@ static inline void ide_init_hwif_ports(h
 		*irq = 0;
 }
 
-/*
- * This registers the standard ports for this architecture with the IDE
- * driver.
- */
-static __inline__ void
-ide_init_default_hwifs(void)
-{
-	hw_regs_t hw;
-
-	ide_init_hwif_ports(&hw, 0x1f0, 0x3f6, NULL);
-	hw.irq = IRQ_HARDDISK;
-	ide_register_hw(&hw, NULL);
-}
+static inline void ide_init_default_hwifs(void) { ; }

@@ -8,8 +8,6 @@
  * Copyright (c) 1998 Russell King
  */
 
-#include <asm/irq.h>
-
 /*
  * Set up a hw structure for a specified data port, control port and IRQ.
  * This should follow whatever the default interface uses.

@@ -31,17 +29,4 @@ static inline void ide_init_hwif_ports(h
 		*irq = 0;
 }
 
-/*
- * This registers the standard ports for this architecture with the IDE
- * driver.
- */
-static __inline__ void
-ide_init_default_hwifs(void)
-{
-	hw_regs_t hw;
-
-	ide_init_hwif_ports(&hw, 0x1f0, 0x3f6, NULL);
-	hw.irq = 14;
-	ide_register_hw(&hw,NULL);
-}
-
+static inline void ide_init_default_hwifs(void) { ; }