Hello,

This adds Virtio GPIO driver based on the proposed specification [1].

The specification for basic GPIO operations is already reviewed by Linus and
Arnd, while the IRQ stuff is still under discussion and not finalized.

I am sharing the code, so everyone gets more clarity on how it will work
eventually in Linux.

I have tested this patchset with Qemu guest with help of the libgpiod utility.
I have also tested basic handling of interrupts on the guest side. It works as
expected.

The host side virtio-backend isn't ready yet and my tests only tested the flow
control between guest and host, but didn't play with real GPIO pins.  That will
be done once I have a working backend in place (WIP).

V3->V4:
- Lots of changes, as the specification changed too much. Better forget
  everything we have done until now :)

--
Viresh

[1] https://lists.oasis-open.org/archives/virtio-dev/202107/msg00232.html

Viresh Kumar (2):
  gpio: Add virtio-gpio driver
  gpio: virtio: Add IRQ support

 MAINTAINERS                      |   7 +
 drivers/gpio/Kconfig             |  10 +
 drivers/gpio/Makefile            |   1 +
 drivers/gpio/gpio-virtio.c       | 648 +++++++++++++++++++++++++++++++
 include/uapi/linux/virtio_gpio.h |  72 ++++
 5 files changed, 738 insertions(+)
 create mode 100644 drivers/gpio/gpio-virtio.c
 create mode 100644 include/uapi/linux/virtio_gpio.h

-- 
2.31.1.272.g89b43f80a514