# Re: \[PATCH v4 05/15\] pinctrl: add a pincontrol driver for BCM6328

- From: Andy Shevchenko \<hidden\>
- Date: 2021-03-04 12:14:10 
- List: linux-gpio
- Page: https://ratatoskr.run/linux-gpio/2021/03/6288239
- Thread: https://ratatoskr.run/linux-gpio/2021/03/6287993/t.md

```text
On Thu, Mar 4, 2021 at 1:13 PM Álvaro Fernández Rojas [ref] wrote:
> > El 4 mar 2021, a las 11:49, Andy Shevchenko [ref] escribió:
> > On Thu, Mar 4, 2021 at 10:57 AM Álvaro Fernández Rojas
> > [ref] wrote:

...

> >> +       static const unsigned int bcm6328_mux[] = {
> >> +               BCM6328_MUX_LO_REG,
> >> +               BCM6328_MUX_HI_REG,
> >
> >> +               BCM6328_MUX_OTHER_REG
> >
> > When it's not terminator add a comma, otherwise remove a comma.

> … so you want me to add a comma or not?

Hmm... you tell me! If this is a list which covers all possible cases
_and_ the last one is the kinda maximum value (aka terminator), then
comma is not needed, otherwise add it (to me feels like the latter
should be done here).

> > Also, why is it inside a function? It's anyway global and constant.
>
> Because this is only used by this function and I’m used to doing this to comply with MISRA C 2004 at work :)

It makes code a bit harder to read.

> >> +       };

-- 
With Best Regards,
Andy Shevchenko
```
