# Re: \[PATCH 3/9\] dt-bindings: regulator: add Qualcomm LCDB regulator

- From: Konrad Dybcio \<hidden\>
- Date: 2026-10-15 09:15:03 
- List: linux-fbdev
- Page: https://ratatoskr.run/linux-fbdev/2026/10/17746130
- Thread: https://ratatoskr.run/linux-arm-msm/2026/10/17746111/t.md

```text
On 10/15/26 10:58 AM, Dmitry Baryshkov wrote:
> Several Qualcomm PMICs have an LCDB block providing the positive and
> negative bias rails for LCD panels. It is not supported by Linux, so
> boards using it either model the rails as dummy fixed regulators and
> depend on the state left by the bootloader.
> 
> Describe the LCDB regulator present on the PM8150L. Use it as a fallback
> compatible for LCDB blocks on PMI632 and PM6150L. PM660L has a different
> version of LCDB block, so it's not being covered.
> 
> Assisted-by: LLM
> Signed-off-by: Dmitry Baryshkov <redacted>
> ---

[...]

> +        lcdb@ec00 {
> +            compatible = "qcom,pm8150l-lcdb";
> +            reg = <0xec00>;
> +            interrupts = <0x5 0xec 0x1 IRQ_TYPE_EDGE_RISING>;
> +
> +            ldo {
> +                regulator-min-microvolt = <4000000>;
> +                regulator-max-microvolt = <6000000>;
> +            };
> +
> +            ncp {
> +                regulator-min-microvolt = <4000000>;
> +                regulator-max-microvolt = <6000000>;
> +            };

Let's tighten up the example to some specific voltage to reduce
room for poor copypastas

Konrad
```
