# Re: \[PATCH 1/5\] dt-bindings: backlight: qcom-wled: Document ovp values for PMI8950

- From: Krzysztof Kozlowski \<krzk@kernel.org\>
- Date: 2026-01-07 14:12:02 
- List: linux-fbdev
- Page: https://ratatoskr.run/linux-fbdev/2026/01/3356651
- Thread: https://ratatoskr.run/dri-devel/2026/01/3356582/t.md

```text
On 07/01/2026 14:31, Barnabás Czémán wrote:
> Document ovp values supported by wled found in PMI8950.
> 
> Signed-off-by: Barnabás Czémán <redacted>
> ---
>  .../bindings/leds/backlight/qcom-wled.yaml           | 20 ++++++++++++++++++--
>  1 file changed, 18 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> index a8490781011d..306fb6642617 100644
> --- a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> +++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
> @@ -98,8 +98,6 @@ properties:
>      description: |
>        Over-voltage protection limit. This property is for WLED4 only.
>      $ref: /schemas/types.yaml#/definitions/uint32
> -    enum: [ 18100, 19600, 29600, 31100 ]

minimum and maximum should stay here. Or alternatively enum with all the
values, but I think first options is enough.

Best regards,
Krzysztof
```
