# Re: \[PATCH v3 4/4\] fbdev: sh\_mobile\_lcdc: Make FB\_DEVICE dependency optional

- From: Chintan Patel \<hidden\>
- Date: 2025-12-30 18:25:49 
- List: linux-fbdev
- Page: https://ratatoskr.run/linux-fbdev/2025/12/3349127
- Thread: https://ratatoskr.run/linux-fbdev/2025/12/3348412/t.md

```text


On 12/30/25 00:13, Helge Deller wrote:
> * Chintan Patel [ref]:
>> The sh_mobile_lcdc driver exposes overlay configuration via sysfs, but the
>> core driver does not require CONFIG_FB_DEVICE.
>>
>> Make sysfs support optional by defining overlay_sysfs_groups conditionally
>> using PTR_IF(). The driver always sets .dev_groups, and the kernel
>> naturally skips NULL attribute groups while the code remains buildable
>> and type-checked.
>>
>> Suggested-by: Helge Deller <deller@gmx.de>
>> Signed-off-by: Chintan Patel <redacted>
>> ---
>>   drivers/video/fbdev/sh_mobile_lcdcfb.c | 12 +++++++++++-
>>   1 file changed, 11 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/video/fbdev/sh_mobile_lcdcfb.c b/drivers/video/fbdev/sh_mobile_lcdcfb.c
>> index dd950e4ab5ce..cb7ed1ff9165 100644
>> --- a/drivers/video/fbdev/sh_mobile_lcdcfb.c
>> +++ b/drivers/video/fbdev/sh_mobile_lcdcfb.c
>> @@ -1350,7 +1350,17 @@ static struct attribute *overlay_sysfs_attrs[] = {
>>   	&dev_attr_overlay_rop3.attr,
>>   	NULL,
>>   };
>> -ATTRIBUTE_GROUPS(overlay_sysfs);
>
> Instead of replacing the ^ ATTRIBUTE_GROUPS() by the code below,
> isn't it possible to just mark the overlay_sysfs_attrs[] array
> _maybe_unused, and just do:
> + #ifdef CONFIG_FB_DEVICE
> + ATTRIBUTE_GROUPS(overlay_sysfs);
> + #endif
>
> ?
Hi Helge,

Yes, the __maybe_unused + #ifdef ATTRIBUTE_GROUPS() approach would work.

I went with the PTR_IF(IS_ENABLED()) pattern because Andy suggested using PTR_IF() to conditionally include overlay_sysfs_group in overlay_sysfs_groups, and to keep .dev_groups always populated while letting the device core skip NULL groups. This avoids conditional wiring via #ifdef and keeps the code type-checked without CONFIG_FB_DEVICE.
If you still prefer the simpler #ifdef ATTRIBUTE_GROUPS() approach for this driver, I can switch to that, but I wanted to follow Andy’s guidance here.


Thanks!
```
