[+cc linux-pci]

On Wed, Jul 12, 2023 at 12:43:01AM +0800, Sui Jingfeng wrote:

From: Sui Jingfeng <redacted>

Currently, the default VGA device selection is not perfect. Potential
problems are:

1) This function is a no-op on non-x86 architectures.
2) It does not take the PCI Bar may get relocated into consideration.
3) It is not effective for the PCI device without a dedicated VRAM Bar.
4) It is device-agnostic, thus it has to waste the effort to iterate all
   of the PCI Bar to find the VRAM aperture.
5) It has invented lots of methods to determine which one is the default
   boot device on a multiple video card coexistence system. But this is
   still a policy because it doesn't give the user a choice to override.

With the observation that device drivers or video aperture helpers may
have better knowledge about which PCI bar contains the firmware FB,

This patch tries to solve the above problems by introducing a function
callback to the vga_client_register() function interface. DRM device
drivers for the PCI device need to register the is_boot_device() function
callback during the driver loading time. Once the driver binds the device
successfully, VRAARB will call back to the driver. This gives the device
drivers a chance to provide accurate boot device identification. Which in
turn unlock the abitration service to non-x86 architectures. A device
driver can also pass a NULL pointer to keep the original behavior.

I skimmed all these patches, but the only one that seems to mention an
actual problem being solved, i.e., something that doesn't work for an
end user, is "drm/ast: Register as a vga client ..."  Maybe
"drm/loongson: Add an implement for ..." also solves a problem, but it
lacks a commit log, so I don't know what the problem is.

In the future, can you please cc: linux-pci with the entire series?
In this posting, only the patches that touched drivers/pci/vgaarb.c
went to linux-pci, but those aren't enough to make sense of the series
as a whole.

  video/aperture: Add a helper to detect if an aperture contains
    firmware FB
  video/aperture: Add a helper for determining if an unmoved aperture
    contain FB
  PCI/VGA: Switch to aperture_contain_firmware_fb_nonreloc()

Since this subject includes the function name (which is nice!), it
would also be helpful if the "Add a helper ..." subject included the
same function name.

  PCI/VGA: Improve the default VGA device selection

If you can make this subject any more specific, that would be useful.
There's more to say about that patch, so I'll respond there.

  drm/amdgpu: Implement the is_primary_gpu callback of
    vga_client_register()
  drm/radeon: Add an implement for the is_primary_gpu function callback
  drm/i915: Add an implement for the is_primary_gpu hook
  drm/ast: Register as a vga client to vgaarb by calling
    vga_client_register()
  drm/loongson: Add an implement for the is_primary_gpu function
    callback

There's unnecessary variation in the subject lines (and the commit
logs) of these patches.  If they all do the same thing but in
different drivers, it's useful if the patches all *look* the same.

You might be able to write these subjects as
"Implement .is_primary_gpu() callback" for brevity.

Bjorn