[PATCH] Initialize ATA before graphics

From: Arjan van de Ven <redacted>
Date: Thu, 2 Jun 2016 23:36:32 -0500

ATA init is the long pole in the boot process, and its asynchronous.
Move the graphics init after it, so that ATA and graphics initialize
in parallel.

Signed-off-by: Paul Menzel <redacted>
---

1.  Taken from Clear Linux: https://github.com/clearlinux-pkgs/linux/commits/master/0110-Initialize-ata-before-graphics.patch
2.  Arjan, can you please add your Signed-off-by line?

 drivers/Makefile | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/drivers/Makefile b/drivers/Makefile
index aaef17c..d08f3a3 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile

@@ -58,15 +58,8 @@ obj-y                                += char/
 # iommu/ comes before gpu as gpu are using iommu controllers
 obj-y                          += iommu/
 
-# gpu/ comes after char for AGP vs DRM startup and after iommu
-obj-y                          += gpu/
-
 obj-$(CONFIG_CONNECTOR)                += connector/
 
-# i810fb and intelfb depend on char/agp/
-obj-$(CONFIG_FB_I810)           += video/fbdev/i810/
-obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb/
-
 obj-$(CONFIG_PARPORT)          += parport/
 obj-$(CONFIG_NVM)              += lightnvm/
 obj-y                          += base/ block/ misc/ mfd/ nfc/

@@ -79,6 +72,14 @@ obj-$(CONFIG_IDE)            += ide/
 obj-y                          += scsi/
 obj-y                          += nvme/
 obj-$(CONFIG_ATA)              += ata/
+
+# gpu/ comes after char for AGP vs DRM startup and after iommu
+obj-y                          += gpu/
+
+# i810fb and intelfb depend on char/agp/
+obj-$(CONFIG_FB_I810)           += video/fbdev/i810/
+obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb/
+
 obj-$(CONFIG_TARGET_CORE)      += target/
 obj-$(CONFIG_MTD)              += mtd/
 obj-$(CONFIG_SPI)              += spi/