# \[PATCH\] video: fbdev: aty: radeon\_pm: Replace mdelay with msleep in radeonfb\_pci\_suspend

- Subsystems: FRAMEBUFFER LAYER, RADEON FRAMEBUFFER DISPLAY DRIVER, THE REST
- Maintainers: Helge Deller, Benjamin Herrenschmidt, Linus Torvalds
- List: linux-fbdev
- 2 messages, 2 authors
- Page: https://ratatoskr.run/linux-fbdev/2018/04/5259888/t

## \[PATCH\] video: fbdev: aty: radeon\_pm: Replace mdelay with msleep in radeonfb\_pci\_suspend

- From: Jia-Ju Bai \<hidden\>
- Date: 2018-04-10 01:47:26 
- Message: https://ratatoskr.run/linux-fbdev/2018/04/5259888.md

```text
radeonfb_pci_suspend() is never called in atomic context.

radeonfb_pci_suspend() is only set as ".suspend" in struct pci_driver.
This function is not called in atomic context.

Despite never getting called from atomic context, radeonfb_pci_suspend()
calls mdelay() to busily wait.
This is not necessary and can be replaced with msleep() 
and usleep_range() to avoid busy waiting.

This is found by a static analysis tool named DCNS written by myself.
And I also manually check it.

Signed-off-by: Jia-Ju Bai <redacted>
---
 drivers/video/fbdev/aty/radeon_pm.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/video/fbdev/aty/radeon_pm.c b/drivers/video/fbdev/aty/radeon_pm.c
index 1417542..a8de909 100644
--- a/drivers/video/fbdev/aty/radeon_pm.c
+++ b/drivers/video/fbdev/aty/radeon_pm.c
@@ -2674,17 +2674,17 @@ int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t mesg)
 		 * it, we'll restore the dynamic clocks state on wakeup
 		 */
 		radeon_pm_disable_dynamic_mode(rinfo);
-		mdelay(50);
+		msleep(50);
 		radeon_pm_save_regs(rinfo, 1);
 
 		if (rinfo->is_mobility && !(rinfo->pm_mode & radeon_pm_d2)) {
 			/* Switch off LVDS interface */
-			mdelay(1);
+			usleep_range(1000, 2000);
 			OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_BL_MOD_EN));
-			mdelay(1);
+			usleep_range(1000, 2000);
 			OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_EN | LVDS_ON));
 			OUTREG(LVDS_PLL_CNTL, (INREG(LVDS_PLL_CNTL) & ~30000) | 0x20000);
-			mdelay(20);
+			msleep(20);
 			OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_DIGON));
 		}
 		pci_disable_device(pdev);
-- 
1.9.1

```

## Re: \[PATCH\] video: fbdev: aty: radeon\_pm: Replace mdelay with msleep in radeonfb\_pci\_suspend

- From: Bartlomiej Zolnierkiewicz \<hidden\>
- Date: 2018-04-24 15:51:45 
- Message: https://ratatoskr.run/linux-fbdev/2018/04/5267823.md

```text
On Tuesday, April 10, 2018 09:47:20 AM Jia-Ju Bai wrote:
> radeonfb_pci_suspend() is never called in atomic context.
> 
> radeonfb_pci_suspend() is only set as ".suspend" in struct pci_driver.
> This function is not called in atomic context.
> 
> Despite never getting called from atomic context, radeonfb_pci_suspend()
> calls mdelay() to busily wait.
> This is not necessary and can be replaced with msleep() 
> and usleep_range() to avoid busy waiting.
> 
> This is found by a static analysis tool named DCNS written by myself.
> And I also manually check it.
> 
> Signed-off-by: Jia-Ju Bai <redacted>

Patch queued for 4.18, thanks.

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

```