# Re: \[PATCH 32/38\] Annotate hardware config module parameters in drivers/video/

- From: Bartlomiej Zolnierkiewicz \<hidden\>
- Date: 2017-04-14 11:27:21 
- List: linux-fbdev
- Page: https://ratatoskr.run/linux-fbdev/2017/04/4978145
- Thread: https://ratatoskr.run/linux-fbdev/2017/04/4971600/t.md

```text
On Wednesday, April 05, 2017 06:01:34 PM David Howells wrote:
> When the kernel is running in secure boot mode, we lock down the kernel to
> prevent userspace from modifying the running kernel image.  Whilst this
> includes prohibiting access to things like /dev/mem, it must also prevent
> access by means of configuring driver modules in such a way as to cause a
> device to access or modify the kernel image.
> 
> To this end, annotate module_param* statements that refer to hardware
> configuration and indicate for future reference what type of parameter they
> specify.  The parameter parser in the core sees this information and can
> skip such parameters with an error message if the kernel is locked down.
> The module initialisation then runs as normal, but just sees whatever the
> default values for those parameters is.
> 
> Note that we do still need to do the module initialisation because some
> drivers have viable defaults set in case parameters aren't specified and
> some drivers support automatic configuration (e.g. PNP or PCI) in addition
> to manually coded parameters.
> 
> This patch annotates drivers in drivers/video/.
> 
> Suggested-by: Alan Cox <redacted>
> Signed-off-by: David Howells <dhowells@redhat.com>
> cc: Jaya Kumar <jayalk@intworks.biz>
> cc: Tomi Valkeinen <redacted>
> cc: <redacted>

Acked-by: Bartlomiej Zolnierkiewicz <redacted>

Best regards,
--
Bartlomiej Zolnierkiewicz
Samsung R&D Institute Poland
Samsung Electronics

```
