# Re: \[PATCH v2 4/5\] fbdev/ssd1307fb: add support to enable VBAT

- From: Tomi Valkeinen \<hidden\>
- Date: 2017-01-19 15:08:27 
- List: linux-fbdev
- Page: https://ratatoskr.run/linux-fbdev/2017/01/8133706
- Thread: https://ratatoskr.run/linux-devicetree/2017/01/8133706/t.md

```text
On 19/01/17 17:03, Rob Herring wrote:

>>> According to the datasheet, SSD1307 has 2 supplies: Vdd and Vcc
>>>
>>> I don't see any mention of a charge pump, so that must be an external
>>> component.
>>
>> VBAT is for SSD1306. Perhaps the DT doc should mention it.
> 
> Datasheet says VBAT is reserved, connect to Vdd. I would just describe
> Vdd and Vcc in that case.

I'm no HW guy, but as far as I understand, you can wire it up two ways.
One has VBAT connected to VDD. The other one has VBAT connected to
external supply. See "Figure 1 : Application Example of SSD1306Z with
charge bump".

 Tomi

```

## Attachments

- [signature.asc](https://ratatoskr.run/linux-fbdev/2017/01/8133706/attachment/0) (application/pgp-signature, 819 bytes)
